Moving-Out-Inventory Planning for Steel Plate Products     

LIAO Xiao _Yun  LIU Yan _Ling  WANG Yi _Liang 《保鲜与加工》2002,(1):146-149

  相似文献   

Numerical Simulation for B900FD-1 Bulletproof Armor Plate Against Penetration     

CHANG Jing-zhen  LIU Zhan-fan  LI Jian-peng  MA Ming-tu 《保鲜与加工》2006,(10):82

ANSYS/LS-DYNA is used to simulate the penetration process of B900FD - 1 bulletproof armor plate, Comparisons and analysis were made between numerical simulation and experiment results. The numerical simulations shows that the Johnson-Cook constitutive model could simulate the physical and mechanical behaviors of ductile materials under shock-loaded. The ultimate-thickness of B9OOFD-1 bulletproof armor plate under 500m/s impact velocity is analyzed by more numerical simulations.  相似文献   

螺旋叶片带板齿式轴流脱粒与分离装置试验台功耗的试验研究   总被引：2，自引：0，他引：2  

李渤海  张义峰  张贵宏 《农机化研究》2006,(12):165-166,170

利用自行研制的螺旋叶片带板齿式轴流脱粒与分离装置试验台，以喂入量、滚筒线速度和导板导角作为试验因素。采用正交旋转组合设计的试验方法，对水稻脱粒与分离过程中的功耗进行了研究，得到以下结论：随着喂入量的增加，功耗增大；当滚筒线速度过大或过小，功耗均增大；功耗随着导板导角的增大而减少。  相似文献   

小型U形渠道适宜量水设备浅析     

戚玉彬  张月云  罗江海 《中国农村水利水电》2007,(12):71-73

在节水灌溉技术的推广应用中,灌区量水是一项基础的、关键性的技术.灌区量水设施灌区节水、实现水资源高效可持续利用具有重要意义。随着节水农业的发展和水价制度的改革，迫切需要研究并推广可对灌区末级渠系计量的量水设备。抛物线形移动式量水堰板和便携式量水槽是针对小型U形渠道测流而提出的量水设备，具有使用方便，结构简单等优点。通过对2种量水设备的比较，模拟分析了在不同渠道条件下的量水性能指标。结果表明：2种量水设备的量水精度均可满足灌区测流要求；抛物线形移动式量水堰板测流幅度大，渠道适应性好；在可以适用的缓坡渠道条件下，可优选便携式量水槽。  相似文献   

刮板式水稻育苗平盘播土装置的设计与试验   总被引：2，自引：0，他引：2  

郑丁科  李志伟  蔡明辉 《农机化研究》2006,(7):154-157,160

分析了常用的一些水稻毯状秧苗工厂化育秧播土装置的特点，根据Mohr-Coulomb的土壤抗剪强度定律，设计出刮板式播土装置。并对生产上常用的砖红壤、水田土等床土进行了播土试验。试验表明，该播土装置能够适用于不同特性床土在不同播土量要求下的播土作业，播土均匀性较高，变异系数均小于10％，盘土厚度相差不大，符合农艺生产要求。  相似文献   

农机制造业钢板板形拼接算法研究     

刘学江  刘静  王会刚  郭子利 《农机化研究》2006,(7):60-62

随着我国经济的高速发展,板形控制已成为当今冶金业迫切需要解决的问题。为此,对用于农机制造的钢板板形图像拼接和特征提取过程中进行了图像预处理,利用图像本身的特点,进行了特征提取后的拼接算法研究,并针对准确和快速的特点,对几种算法进行了对比分析,给出了典型算法的计算机框图和算法选用的建议。  相似文献   

万能通用精准播种机的研究与试验   总被引：6，自引：0，他引：6  

张波屏  刘格兰 《农业机械学报》2001,32(2):34-37

通过对排种机理的研究，阐述了播种机两大系列产品的通用化问题。通过对锥盘式小麦精准播种机的研究、应用及改进，解决了以锥盘式精准排种器为基础、以“一组三行”播种单体为基型的播种机通用化问题。  相似文献   

Neural network prediction of performance parameters of an inclined plate seed metering device and its reverse mapping for the determination of optimum design and operational parameters   总被引：2，自引：0，他引：2  

M. Anantachar  T. Guruswamy 《Computers and Electronics in Agriculture》2010,72(2):87-98

Seed planting equipment with inclined plate seed metering devices is the most commonly used equipment for planting of peanut crop in India. For obtaining the high yield, it is very essential to drop the peanut seeds in rows maintaining accurate seed rate and seed spacing with minimum damage to seeds during metering. This mainly depends on forward speed of the planting equipment, rotary speed of the metering plate and area of cells on the plate. The relationship between these factors and the performance parameters viz., seed rate, seed spacing and percent seed damage can be established using regression analysis. But they may not be very accurate and may pose difficulty in the determination of inputs for a set of desired outputs (reverse mapping). Hence, an attempt has been made in this paper to develop the feed forward artificial neural network (ANN) models for the prediction of the performance parameters of an inclined plate seed metering device. The data were generated in the laboratory by conducting experiments on a sticky belt test stand provided with a seed metering device and an opto-electronic seed counter. The generated data was used to develop both statistical and neural network models. The performance of the developed models was compared among themselves for 4 randomly generated test cases. The results show that the ANN model predicted the performance parameters of the seed metering device better than the statistical models. In order to determine the optimum forward speed of the planting equipment, peripheral speed of the metering plate and the area of cells on the plate to obtain the recommended seed rate of 33.33 seeds/m², seed spacing of 100 mm and percent seed damage of 0.2% with 100% fill of the cells, a novel technique of reverse mapping using ANN model was followed. It was observed that the optimum forward speed of the planting equipment and optimum area of cells on the metering plate had good correlation with size of seed. Linear regression equations were developed to predict the optimum forward speed of the planting equipment and optimum area of cells on the metering plate using the size of seeds as independent parameter. The peripheral speed of the metering plate of 0.237 m/s was found to be optimum for the size of seeds in the range of 95.42-123.01 mm². However, the results need to be verified by conducting planting operation under actual field conditions.  相似文献   

张河湾抽水蓄能电站1号机组转子安装出现的问题及解决方法     

王国柱  林志宏 《湖南农机》2012,(9):116-117

文章介绍了张河湾抽水蓄能电站转子结构特点及安装工艺,分析了转子安装过程中出现的磁轭冲片受损、拉紧度不够等原因及解决办法,介绍了如何解决安装过程中分块式压板的水平度调整。  相似文献   

RADIOGRAPHIC ANATOMY OF THE CRIBRIFORM PLATE (LAMINA CRIBROSA)     

Tobias  Schwarz  MA  Dr. Med. Vet.  Martin  Sullivan  BVMS PhD  Klaus  Hartung  Prof. Dr. Med. Vet 《Veterinary radiology & ultrasound》2000,41(3):220-225

The radiographic appearance of the cribriform plate was investigated in 16 canine cadaver heads. The cribriform plate appeared as a "V"-shaped multilinear bone-opaque stripe in the caudal nasal region in projections perpendicular to the hard palate in 6 dogs with a skull index between 50.00 and 54.00. In 9 dogs with a skull index between 55.40 and 74.40, the cribriform plate had a more "C"-shaped and sharp appearance. In vertically oblique projections with an obliquity greater than 20 degrees, the cribriform plate lost its sharp outline and finally (40 degrees) disappeared. In lateral projections the cribriform plate appeared as a "C"-shaped interrupted bone-opaque stripe in all 16 dogs. In more brachycephalic dogs frontal bone structures superimposed on the cribriform plate on ventrodorsal and dorsoventral views and accentuated the radiographic appearance of the plate. Vertically oblique views separated both structures to produce two lines.  相似文献