基于有限混合模型的山东海域口虾蛄群体体长结构分析     

耿玉玲  张崇良  栾静  徐宾铎  薛莹  任一平 《水产学报》2020,44(10):1663-1675

个体大小是渔业资源种群的重要结构特征,一般研究中采用平均个体体长或平均体质量等分析指标,难以充分反应具有多年龄结构和个体生长速度差异的种群组成差异。为研究口虾蛄个体大小组成的时空变化,实验根据山东海域2016年10月和2017年1、5、8月的底拖网调查数据,应用有限混合模型分析了不同性别、不同时间、不同水深口虾蛄个体大小的频率分布特征。结果发现,除秋季外,山东海域口虾蛄均可区分为高、低两个年龄组,同时雌雄体长分布具有一定的差异。从冬季到夏季,雌性口虾蛄中低龄组个体比例先下降后上升,雄性口虾蛄低龄比例则逐渐下降。就不同水深而言,口虾蛄低龄组个体主要集中在近海海域,其比例由近海向远海逐渐减小。各年龄组的近远海分布表现出季节性差异,春季高龄口虾蛄在近海比例最大,由近海向远海比例逐渐减小;夏季高龄组口虾蛄在20～30 m水深比例最大;冬季高龄组口虾蛄比例则由近海向远海逐渐增加。有限混合模型能够较好地对口虾蛄的体长结构进行分析,解析口虾蛄不同年龄组在山东海域的时空分布,对于深入了解口虾蛄种群分布动态和科学的渔业管理具有重要意义。  相似文献   

金光杏梅叶面积回归测算研究   总被引：3，自引：1，他引：2  

张传来  郝峰鸽  宋荷英  李娟 《北方园艺》2009,(9)

以金光杏梅成熟叶片为试材,研究了叶长、叶宽与叶面积的关系.结果表明:叶长、叶宽与叶面积均呈正相关关系.叶长、叶宽与叶面积之间的相关系数分别为0.7084、0.8546,叶长和叶宽与叶面积的复相关系数为0.9868,在0.01水平下均达到了极显著水平.在此基础上建立了叶长(x1)、叶宽(x2)、叶长和叶宽与叶面积(y)之间的回归方程y=61.4140x1-2 480.6、y=28.7600x2-0.8546、y=17.6276x1+41.2594x2-1 078.4906,3个回归方程均可用于测算金光杏梅的叶面积,其中以叶长和叶宽与叶面积的二元回归方程测算结果更为精确.在具体应用中,可根据所要求的精确度进行选择.  相似文献   

水稻种绳直播机对地表不平度的动态响   总被引：3，自引：0，他引：3  

任文涛  吕小荣  张本华 《农业机械学报》2009,40(8):58-61

为了探索水稻种绳直播机对地表不平度激励的适应性,进行了动态模拟试验.根据样机的结构特点,设计了由角位移传感器、数据采集卡和计算机等构成的地表不平度检测系统.检测了由旋耕形成的原始地表不平度和经过种绳直播机作业后形成的地表不平度,应用Matlab软件对信号进行了时域和频域分析.应用等同法建立了系统的传递函数,分析了系统的动态特性.研究结果表明,由种绳直播机和土壤等构成的土壤-机器系统是一个具有一阶惯性特征的线性系统.系统的响应速度、频带宽度和覆土厚度等性能指标能够满足农业技术要求.  相似文献   

Jackknife method for estimating the variance of the age composition using two-phase sampling with an application to commercial catches of swordfish (Xiphias gladius)     

Hugo Robotham  Zaida I. Young  Juan C. Saavedra-Nievas   《Fisheries Research》2008,93(1-2):135-139

An estimate of the age composition of a commercial swordfish catch and its variance was obtained using the replicate full jackknife estimator for two-phase sampling where the sampling units in the first phase are clusters (vessel-trips) and the units of the second phase are individual fishes. The jackknife variance estimator was compared with an analytical estimator of variance commonly used in fisheries studies which ignores the clustering, and assumes simple random sampling of individual fish. The application of these naïve estimators to the Chilean South Pacific swordfish fishery results in an underestimation of the variance. This is a consequence of using an inappropriate primary sampling unit of analysis in the first-phase sample where the vessel-trip unit is replaced by an individual fish unit, thus ignoring the intra-cluster correlation in age samples. The jackknife estimator of variance is an alternative useful for complex two-phase sampling designs.  相似文献   

育珠期三角帆蚌的生长及其与珍珠增长的关系   总被引：4，自引：3，他引：1  

张根芳  刘其根  方爱萍  叶秋红  李家乐 《水产学报》2008,32(6):922-928

通过对三角帆蚌壳长、壳宽、蚌总重（整体湿重）、内脏团湿重、壳重和珍珠重等指标在5-11月间的逐月连续测定,研究了常规养殖模式下育珠期2龄三角帆蚌在主要生长季节的生长规律及其与珍珠生长的相关性。结果表明：珍珠重(PW)与壳长(SL)、壳宽(SW)的关系分别为PW=0.0008SL3.3946 (R2=0.6948)和PW=0.7809SW1.0227 (R2=0.6888);而珍珠重(PW)与蚌重(TW)、内脏团重(BW)和壳重(W)的关系分别为PW=0.0021TW1.5434 (R2=0.7337),PW=0.107BW0.9125 (R2=0.7158)和PW=0.0324W1.1259 (R2=0.7101);三角帆蚌总重(TW)与壳长(SL)、 壳宽(SW)的关系最适合用指数函数进行拟合,其关系式分别为TW=16.003e0.1681SL,(R2=0.7961),和TW=64.311e0.1372SW (R2=0.6822);而内脏团重(BW)和壳重(W)与壳长(SL)、壳宽(SW)的关系则适合为幂函数曲线拟合,关系式分别为BW=0.0188SL3.1427,(R2=0.6927);W=0.0656SL2.7721, (R2=0.8271)和BW=12.446SW0.8974 (R2=0.617);W=19.876SW0.802 (R2=0.7563)。本研究结果发现,珍珠生长与蚌总重、壳长和壳宽等外部测量指标之间的相关性显著,从而无须通过杀蚌取珠而直接通过这些外部生长指标的测定就能较好地了解珍珠的生长,更好地为珍珠养殖生产和管理提供指导。  相似文献   

水稻抗白背飞虱新基因Wbph6(t)的定位初报   总被引：3，自引：3，他引：3  

马良勇  庄杰云  刘光杰  闵绍楷  李西明 《中国水稻科学》2002,16(1):15-18

应用由90个株系组成的TN1/鬼衣谷F3群体,分析了水稻抗白背飞虱新基因Wbph6 (t)与DNA标记的连锁关系。应用隐性极端群体法,将[WTBX][STBX]Wbph6[WTBZ][STBZ](t)定位于第11染色体短臂,与SSLP 标记RM167的遗传距离为21.2 cM。  相似文献   

斯卑尔脱细胞质对小麦种子长度、重量及杂种优势的遗传效应          下载免费PDF全文

江海平 《麦类作物学报》2003,23(3):22-25

为了筛选优良的新型小麦雄性不育系，对斯卑尔脱、云南铁壳麦、提莫非维小麦、拟斯卑尔脱山羊草等四种异源细胞质在同核异质条件下对不育系及其杂种一代的种子长度、重量及杂种优势的遗传效应作了比较研究。结果表明，斯卑尔脱细胞质对小麦种子大小、重量具有明显正效应，且筛选出了两个由其所配制的具明显杂种优势的杂交组合。这说明，斯卑尔脱细胞质不育系在栽培小麦中易于找到恢复源且恢复度高，其对种子大小和重量的稳定的正效应可能是产生较强杂种优势组合的重要原因之一。  相似文献   

爪哇稻Wanilava细胞质雄性不育系的创建及AFLP指纹图谱分析   总被引：6，自引：0，他引：6  

陈永军  谢崇华  张景荣  郑文静  胡尚连  魏炘  王琦琳  杞从婷  刘永胜 《中国水稻科学》2008,22(1):28-32

初步鉴定了爪哇稻Wanilava细胞质雄性不育系的特征特性,并以2套水稻（Oryza sativa）同核异质材料273JW（爪哇型胞质不育系）、273D（D型胞质不育系）及其对应的保持系273B, 803JW（爪哇型胞质不育系）、803WA（野败型胞质不育系）及其对应的保持系803B为研究对象,利用AFLP 分子标记技术构建了JW型不育胞质的指纹图谱,分离了JW型胞质与野败型胞质及保持系的差异片段。  相似文献   

The Rht13 dwarfing gene reduces peduncle length and plant height to increase grain number and yield of wheat     

G.J. Rebetzke  M.H. Ellis  D.G. Bonnett  A.G. CondonD. Falk  R.A. Richards 《Field Crops Research》2011,124(3):323-331

The green-revolution Rht-B1b and Rht-D1b dwarfing alleles are usually associated with increased wheat yields but are linked to reduced early growth and poor emergence if sowing conditions are unfavourable. Other dwarfing genes are available but not used in commercial breeding. The Rht13 bread wheat donor, Magnif M1, produces uniquely short peduncle and penultimate internodes to reduce plant height. A set of near-isogenic (NILs) and recombinant inbred (RILs) lines varying for height were developed from the cross of Magnif M1 and the Rht8c-containing Chuan-mai 18, and evaluated for a range of agronomic characteristics across favourable environments. Reductions in plant height were associated with increased grain number (r² = 0.35**) and harvest index (r² = 0.62**) in the NILs. Reduced-height RILs containing the Rht13-linked, Xgwm577_M microsatellite marker were significantly shorter, produced greater biomass, yield and harvest index, and increased spike and grain number than lines without the marker. Approximately 74 and 7% of the total phenotypic variance in plant height was accounted for by allelic differences in Xgwm577 and Rht8 loci, respectively. The peduncle and penultimate peduncle internodes of Rht13-containing lines were proportionately shorter than Rht8c-containing sibs and lines containing the Rht-B1b dwarfing allele. The unique height-reducing phenotype, increased grain number and yield associated with Rht13 indicate considerable potential for use of this dwarfing allele for improving wheat performance.  相似文献   

Porosity and capillarity of weft knitted spacer structures     

G. B. Delkumburewatte  T. Dias 《Fibers and Polymers》2009,10(2):226-230

A geometrical model of weft knitted spacer structures made with mono-filament yarn has been analysed to understand the spacer yarn path. Theoretical models have been created to predict the porosity and the radius of the capillaries of a knitted spacer structure depending on their geometrical parameters, such as course spacing, wale spacing, stitch length, fabric thickness, count of yarn and fibre density. Polyester knitted spacer fabrics were produced with different parameters; their porosity was determined by measuring the weight and compared with the theoretical porosity. The validity of the model was confirmed by experimental results. The porosity of knitted spacer structures made out of mono-filament yarn can be maintained above a certain level by adjusting the fabric parameters such as fabric thickness, course spacing and wale spacing.  相似文献