The Alleviating Effect of Elevated CO2 on Heat Stress Susceptibility of Two Wheat (Triticum aestivum L.) Cultivars     

S. Shanmugam  K. H. Kjaer  C.‐O. Ottosen  E. Rosenqvist  D. Kumari Sharma  B. Wollenweber 《Journal of Agronomy and Crop Science》2013,199(5):340-350

This study analysed the alleviating effect of elevated CO₂ on stress‐induced decreases in photosynthesis and changes in carbohydrate metabolism in two wheat cultivars (Triticum aestivum L.) of different origin. The plants were grown in ambient (400 μl l^?1) and elevated (800 μl l^?1) CO₂ with a day/night temperature of 15/10 °C. At the growth stages of tillering, booting and anthesis, the plants were subjected to heat stress of 40 °C for three continuous days. Photosynthetic parameters, maximum quantum efficiency of photosystem II (PSII) photochemistry (F_v/F_m) and contents of pigments and carbohydrates in leaves were analysed before and during the stress treatments as well as after 1 day of recovery. Heat stress reduced P_N and F_v/F_m in both wheat cultivars, but plants grown in elevated CO₂ maintained higher P_N and F_v/F_m in comparison with plants grown in ambient CO₂. Heat stress reduced leaf chlorophyll contents and increased leaf sucrose contents in both cultivars grown at ambient and elevated CO₂. The content of hexoses in the leaves increased mainly in the tolerant cultivar in response to the combination of elevated CO₂ and heat stress. The results show that heat stress tolerance in wheat is related to cultivar origin, the phenological stage of the plants and can be alleviated by elevated CO₂. This confirms the complex interrelation between environmental factors and genotypic traits that influence crop performance under various climatic stresses.  相似文献   

基于视景仿真技术的联合收割机牵引及加载性能研究     

王曦  张晓亮  刘志刚  高珍冉 《农机化研究》2015,(7):236-239

随着农业机械化的不断发展,联合收割机的应用越来越普遍,大大地提高了农业生产效率。然而,在联合收割机使用中还存在一些驾驶员视域不开阔、可视环境差等不安全因素。针对这些问题,本文引入了视景仿真技术概念,通过构建基于视景仿真技术的联合收割机牵引及加载性能模型,对联合收割机的牵引及加载性能进行仿真分析。结果显示,将视景仿真技术应用与联合收割机,方便了驾驶员及时掌握实地信息,提高了牵引性能和加载性能,降低了驾驶危险系数。  相似文献   

基于外碾削立式碾米机的离散元法仿真分析     

史艳花  张国全  黄志平  张宁 《农机化研究》2015,(5)

引入离散元仿真技术对碾米机械进行仿真研究,旨在探索碾米机在碾白过程中的碎米机理。通过模拟大米在输送过程来获得速度、运动轨迹等数据,由图表等方式输出模拟结果,可以看到米粒群绕着碾辊做螺旋形前进的运动规律。该技术在粮食机械设计系统的研究中具有重要的推广意义,可为碾米机优化设计提供理论参考,也为其他农业物料精确定量分配提供了一种新的方法。  相似文献   

直通式调节阀内部流场分析     

李海峰  马若群 《中国农村水利水电》2015,(1)

基于CFD对直通式调节阀内部流场进行了二维数值模拟,并得到了内部流动参数的可视化图形。对比25%和5%两种开度下,阀门处的压力,速度以及能量损失都存在很大的差异。25%开度下的压力、流速有明显的下降趋势,而5%开度下压力和速度则迅速变化。+两种开度下产生的涡流位置不同,5%开度下能量损失比25%开度下的要大。  相似文献   

电压空间矢量脉宽调制的简单算法     

袁帆 《湖南农机》2015,(4)

在电压空间矢量脉宽调制(SVPWM)控制技术原理的基础上,提出了一种简单快速算法,该算法只有普通的四则运算,计算变得非常简单,消除了常规的空间矢量控制算法中由于三角函数和无理数的近似计算而带来的计算误差及影响计算精度和速度的缺点,使结果更加准确。因而更适合应用于基于DSP 的数字化控制。理论分析和大量的MATLAB仿真结果表明,该算法具有谐波含量低、直流电压利用率高的优点。  相似文献   

基于HYDRUS-2D的地下滴灌下水分运移数值模拟研究   总被引：2，自引：0，他引：2  

潘红霞  付恒阳  贺屹 《灌溉排水学报》2015,34(3)

利用HYDRUS-2D软件模拟了地下滴灌条件下滴头周围黏壤土的土壤水分动态,并与田间观测进行对比;通过分析不同滴头流量对试验地土壤湿润模式的影响,明确了最佳灌水技术参数。结果表明,HYDRUS-2D软件模拟结果与观测值一致,体积含水率均方根误差为1.2%~4.5%,湿润范围均方根误差变化范围为2.1~3.87cm。  相似文献   

FLUENT软件及其在植保机械方面的应用     

孙小华  祁力钧  王俊  宋吉林 《农机化研究》2006,(9):187-188,191

FLUENT软件是流体力学中通用性较强的商业软件之一，由于FLUENT软件的应用，节省了大量的人力和物力。对实际应用有重大的指导作用。为此，通过简述FLUENT在植保机械方面的应用实例，提出了FLUENT在植保机械方面的发展前景。  相似文献   

砌石拱坝加高倍厚的三维接触仿真     

张社荣  蔡胜利  陈敏岩  黄昌清 《中国农村水利水电》2005,(4):86-89

对砌石拱坝的加高倍厚中新、老坝体结构面，用有限元软件ANSYS结合接触理论进行计算，并分析结果得出：温升、水压力和淤沙压力使结合面上的接触压力增大，从而接触摩擦应力较大，有利于结合面的结合，而结合面在温降的作用下有脱离的趋势。  相似文献   

Simulation on the Characteristics of Flow Pattern in Sprial uP-flow Reactor     

LUO Gu-yuan  ZHANG Ming-xuan  JI Tie-jun 《保鲜与加工》2007,(5):11-14

In order to analyze the reason why the Spiral Up-flow Reactor system has excellent removal effect of COD, N and P, the authors use PHOENICS, a computational fluid dynamics program, to investigate the hydraulic characteristics and flow model of the anaerobic part of Spiral uP-flow reactor. The result shows that the fluid in the reactor unit flowed upward by the spiral way, and that flow pattern was combined by plug flow and complete-mix flow, and that the percentage of plug flow was about sixty-five percent. Spiral Up-flow Reactor units the Characteristics of PFR and CSTR, which makes it work well.  相似文献   

Analysis and FEM Simulation of the Forming Process of Front Bumper Bracket     

ZHOU Jie  ZHANG Yu-ping  WEI Guang-zhen  YANG De-sen 《保鲜与加工》2007,(7):14-17

The processing characteristics of the front bumper bracket are analyzed,and a reasonable process scheme is worked out.The three-dimensional sheet metal forming analysis software PAM-STAMP are adopted to simulate the bracket's drawing process.Then the surface of die is proved fine through analyzing the FLD diagrams and the forming results.An economical and optimized die structure is decided,and a complete set of dies of the bracket is designed.The spacing block is added in the sizing mold,which control the size precision of end products and assembling columns actively,and finally the certified products.The material utility and the labor productivity are raised,the production cost is saved,and the mold design quality and the efficiency are improved effectively.  相似文献