机柜式微型机房在银行营业网点的应用研究     

黄志敢 《湖南农机》2015,(3):45-46

为了简化和规范银行网点设备间的建设,建议引入机柜式微型机房中心,使用含精密空调的一体式机柜,把所有设备均安放在机柜里,成为一个微型机房,实现了绿色节能。  相似文献   

Suspected systemic gas embolism associated with lung tissue perforation caused by a previously inserted chest drain in a dog     

Iago Asorey DVM  DECVAA  Federico Corletto DVM  PhD  DECVAA 《Journal of Veterinary Emergency and Critical Care》2023,33(5):613-618

  相似文献   

Experimental Investigation on Chip-break Influenced by Cryogenical Cold Air jet     

YANG Ying  TONG Ming-wei  YAN Xing-chun  SHEN Qiang 《保鲜与加工》2004,(5):74-77

In machine cutting, the replacement of traditionalKGcutting solution with cryogenical cold air jet not only possesses a good cooling and lubricating efficiency, but also can avoid the occurrenceof environmental pollution. In order to clarify the manner and performance of discharged cutting chip under cryogenical cold air jet condition, an experiment was carried out for steel grade 45 in the dry and cryogenical cold air jet cutting comparatively. The effects of cryogenical cold air jet on the breaking of cutting chip are discussed. Experimental results reveal that, in the valid ranges of pressure and temperature, the cryogenical cold air jet can widen the chip broken region effectively. Different insufflating angle of cold air behaves different influence on the chip-break. From the experiment, it has been gained that the optimized jet insufflatingangle, temperature effecting range and pressure working range of cold air, which provides the foundation of industrial manufacturing.  相似文献   

Data Processing of Motorcycles Coastdown Testing     

XU Zhong-ming  JIN Jie  ZHANG Zhi-fei  MA Yong-zhang  ZHOU Kun 《保鲜与加工》2007,(9):14-16

  相似文献   

Study on Design of Bio-clean Operating Room     

YANG Zhi wei  LI Bi yu 《保鲜与加工》2001,(4):20-25

The design of Bio-clean operating room in modern hospital is quite different from that of traditional operating room. This paper discusses three aspects of Bio-clean operating room design: air clean standard and air purification, interior equipment system and interior finish. It is hoped that this discussion will conduce to later designs.  相似文献   

Mathematical Medel for Heat Transfer on Solididing Ladle of Hot Metal     

Tang xin  XuChushao 《保鲜与加工》1995,(4):104-109

In this paper,solidifinG ladle of hot metal has been studied from the point ofview of heat transfer.A mathematical model,which is applied to predict the shape and the thicknessof solidifing layer,has been developed. The theoretical calculated results agree with the appliedresults in preduction. The effects of various paramenters,such as the circulating times, the inner-surface temporature of ladle and the different refractories,on the shape and the thickness ofsolidifing layer have been discussed.These are contributed to reduce the solidifing ladle of hot metal.  相似文献   

Simulation of the penetration rate (ROP) of the air percussion drilling     

LIN Yuan-hu  LI Run-fang  SHI Tai-he  LIANG Zheng  LIN Teng-jiao Goods  SWPI  ngqing  Chin 《保鲜与加工》2004,(8):1-6

It is difficult to calculate the penetration rate (ROP) of percussion drilling. In the early research, the empirical or semiempirical formulae of the ROP are derived from the laboratory or field data collected by the researchers. However, the ROP value of the formulae is not as accurate as that in the field. Benefiting from the dynamic model, the geometric structure model and the theory of the roller cone bit, the mathematical model of the hammer bit, the mathematical model of the true bottom hole and the mathematical model between the tooth and the rock of the hammer bit are established. Hence the ROP of the air percussion drilling can be predicted by simulation. Field tests show the models are reliable and the results are coincident with that in the field. The research can help to redesign the hammer bit and optimize the drilling parameters.  相似文献   

发动机用平板型空滤器流动阻力特性分析和改进     

唐刚志  张力  邓涛  尹燕莉 《保鲜与加工》2015,(4):18-23

为减小平板型空滤器流动阻力以增大进气量,对平板型空滤器流动阻力特性开展了实验研究,获得了空滤器流动阻力随流量变化的规律和阻力构成成分。阻力随流量的增大而加速增大,滤芯阻力约占整个空滤器阻力的一半,入口流量为120 m 3/h时,总阻力为915.3 Pa,滤芯阻力为426.4 Pa。在实验获得滤芯阻力参数的基础上,提出采用多孔介质跃升模型对平板型空滤器内部流场开展三维数值仿真分析,结果表明,仿真结果与实验结果比较吻合,最大误差为5.67%。滤芯阻力同样约占整个阻力的一半,另一半阻力主要为出口处阻力,其余壁面阻力约占15%。最后,在实验和仿真分析的基础上,提出了改进模型并进行了仿真分析。结果表明,改进模型阻力有较大程度的下降,入口流量为120 m 3/h时,总阻力为588.2 Pa,较原始模型下降了32.2%;增大空滤器流通横截面积是减小阻力以增大进气量的有效手段,改进空滤器壁面的平滑性是补充措施。  相似文献   

A STUDY ON HEAT AND MOISTURE STATE OF HULL LAYER FOR THERMAL INSTULATION OF A COLD STORAGE     

Chen Qigao Feng Ya 《保鲜与加工》1993,(1)

This paper analyses the thermal moist characteristics of the hull layer beside an air layer at lower temperature in an envelope for a cold storage and presents a new method of waterproof by air layer. With test data from engineering practice, the theory on the barrier of self moisture proof at the surface sublayer of the hull layer in an attic on a cold storage is proven. The dried zone about three phase point is confirmed. It is a new knowledge for thermophysics on thermal design of a cold storage with an optimum thermal performance.  相似文献   

Application of Matter Element Analysis in Assessment of Ambient Air Quality     

Lin Yan Gu Hengyue Sun Yang 《保鲜与加工》1997,(1):38-42

A new method for assessment of ambient air quality is proposed by using matter element analysis.This model is simple and reasonable in assessment.The practical example is given,and compared with other methods.  相似文献