Boron toxicity of strawberry     

《Communications in Soil Science and Plant Analysis》2012,43(11):1085-1091

Abstract

Radlands Crimson strawberries were grown in a glasshouse with 7 rates of applied boron. Wood shavings mulches with different boron concentrations were also applied as separate treatments. Boron toxicity symptoms were produced in leaves by boron rates of 0.32 kg ha^‐1 and greater on a soil containing 1.6 ug B g^‐1 of hot water extractable boron. Concentrations greater than 123 μg B g^‐1 in old leaves were associated with boron toxicity symptoms.

In the B rate experiment, soil boron concentrations greater than 1.9 μg B g^‐1 soil were associated with leaf toxicity symptoms which increased in severity with increasing soil boron concentrations up to 4.1 μg B g^‐1 soil. Wood shavings mulch containing 17 μg B g^‐1 caused boron toxicity symptoms in older leaves whereas mulches containing less than 6 μg B g^‐1 did not produce toxicity symptoms.  相似文献   

木/竹基复合材料在机电产品包装的应用     

梁艳君  于文吉 《木材工业》2015,29(2):30-33

我国机电产品的包装大量使用实木材料,面临着资源紧张和成本高昂等问题。通过分析机电产品包装材料的结构形式和承载要求,讨论重组木/竹复合材料在包装行业应用的可行性,从政策、成本和性能等方面,总结新型重组木/竹复合材料替代实木材料用于机电产品包装的优势及发展前景。  相似文献   

Basic handling characteristics of wood fuels: Angle of repose,friction against surfaces and tendency to bridge for different assortments     

《Scandinavian Journal of Forest Research》2012,27(1-4):583-597

Basic handling characteristics were measured for sawdust, fuel pellets, fuel chips, hog fuel and chunkwood. The aim was to find relations between the basic handling characteristics and easily measurable fuel properties to facilitate the design of feeding systems in heating plants. The angle of repose was 25–55° and increased with the increasing ratio of particle length to thickness and with the increasing content of hooked or long particles. The angle of static friction, 10–40°, was affected more by the kind of surface than the fuel and followed the ascending order: coated plywood, urethane rubber, particle board, stainless steel, concrete and rubber belt conveyor. The tendency to bridge varied considerably and increased with greater content of hooked or long particles, a deeper fuel bed depth over the opening and a higher moisture content. The results indicate that more attention should be paid to the particle shape.  相似文献   

浅析影响难胶材胶合的主要因素     

饶丽敏  李伊乐 《内蒙古林业调查设计》2010,33(3):89-92,113

文章介绍了难胶合材的主要特征。论述了影响难胶合材胶合的几个主要因素,诸如解剖结构特征、抽提物、PH值、密度和表面机械加工特征。  相似文献   

基于最小二乘法的落叶松木粉粒径数学建模与分析     

任洪娥  沈雯雯  白杰云  官俊 《林业科学》2015,(4)

【目的】建立落叶松木粉粒径与长宽比的数学模型，通过分析数学模型和其二阶导数，揭示木粉长宽比随粒径减小的变化趋势及变化的根本原因，获得最大长宽比对应的粒径，为建立长宽比与力学性能之间的定量关系提供参考。【方法】利用光学显微镜拍摄获得木粉的显微图像，测算获得目标木粉成熟管胞的平均长度、平均宽度以及木粉粒径的大小。通过数字图像处理技术提取单木粉颗粒的矩形度、长宽比：将原始木粉显微图像由 RGB颜色空间转到Lab颜色空间，提取其b分量；对b分量图像用3×3模板进行中值滤波；用K-means算法将去噪后图像聚类为2类，得木粉的二值图像；对二值图像用5×5的结构元素进行先开启后闭合的数学形态学运算；用八连通区域法标记图像中的单木粉颗粒；对标记后图像用目标区域像素点个数统计法计算获得单木粉颗粒的几何面积，用主轴法获得单木粉颗粒的最小外接矩形的长、宽、面积；计算获得单木粉颗粒的长宽比、矩形度数据。采用最小二乘法对木粉粒径与长宽比进行数据拟合，通过分析评判多项式、高斯和傅里叶3种拟合函数后选用高斯方程表达得木粉粒径与木粉长宽比的数学模型，再根据其拟合曲线方程计算得其二阶导数，结合模型的二阶导数和测算得的木粉管胞数据对高斯模型进行分析与讨论。【结果】矩形度不随木粉粒径的减小而变化，均值在0.6～0.8之间。长宽比随粒径减小出现先增大后减小的趋势：木粉粒径在1100～576μm 时，长宽比数值从接近于1开始逐渐增大；木粉粒径为576μm时(与本文目标木粉成熟管胞的平均长度563.82μm接近)，长宽比达到最大数值4.6；木粉粒径在576～30μm时，长宽比逐渐减小；而粒径小于50μm 时(与目标木粉成熟管胞的平均宽度46.498μm接近)，长宽比数值再次趋近于1。【结论】长宽比的变化与管胞破裂密切相关：木粉粒径大于管胞长度时，木粉主要通过纵向断裂使粒径减小；粒径与管胞长度接近时，长宽比较大；粒径小于等于管胞宽度范围内，木粉主要是横向断裂，而长宽比基本不再发生变化且趋近于1。长宽比和冲击强度随粒径减小的变化趋势是一致的，长宽比是影响材料力学性能本质因素之一。  相似文献   

GVF Snake模型在木材表面缺陷分割的应用研究     

白雪冰  郭景秋  陈凯  李昊  许景涛 《中南林业科技大学学报(自然科学版)》2015,(2):90-95

针对木材表面存在纹理、凹凸结构、边缘颗粒和弱边缘等特点,对其直接运用Snake模型进行分割难以得到有效边缘提取,因此提出运用改进的GVF Snake模型和维纳滤波相结合对其进行分割。首先对木材图像进行维纳滤波使得纹理变得平缓,同时可以使得缺陷边缘得到有效保留,再对其进行GVF Snake模型分割。该算法对初始轮廓的选择敏感度降低,拓展性增强,可以使得轮廓曲线更加快速地收敛到缺陷边缘,避免陷入局部最优现象,提高对弱边缘和凹凸图像分割效果,分割结果更加清晰、连贯,具有良好的实时性。为木材表面缺陷的分割提供一种更为有效的方法,拓宽了snake模型的应用范围。  相似文献   

Possibilities for energy wood procurement in north-west Russia: Assessment of energy wood resources in the Leningrad region     

《Scandinavian Journal of Forest Research》2012,27(6):559-567

Abstract

Methodology to assess the potential for energy wood procurement in Russia is described in this article and applied to the Leningrad region. Wood from thinnings, logging residues, non-industrial roundwood and residues from sawmilling are considered as sources for energy production. Energy wood available in the region, based on the 2004 actual cut, is approximately 4 million m³. Nearly 86% of this is non-industrial roundwood and felling residues, and 14% is by-products from sawmilling. Almost two-thirds of the non-industrial roundwood and felling residues are in cutting areas and one-third is in central processing yards. Deciduous tree species (birch and aspen) dominate in energy wood, representing about 65% of the total amount of felling residues and non-industrial wood. It is possible to intensify utilization of forest resources and thereby also to increase the use of wood in energy production. The total amount could be 54% higher if the allowable cut was fully utilized and 124% higher if thinnings were also utilized completely. There are, however, significant intraregional differences, as the current rate of utilization of forest resources varies in the region.  相似文献   

桉树木材旋切单板质量以及制造胶合板工艺的研究     

叶忠华 《福建林业科技》2012,(1):35-40,52

对福建省主要桉树木材材性及其旋切单板厚度偏差、背面裂隙率进行检测分析,探讨木材旋切单板的适应性和制造胶合板的工艺并采用正交法优选最佳工艺参数。结果表明:尾叶桉单板背面裂隙率和单板厚度变动系数比尾巨桉小,尾叶桉用于旋切1.5 mm厚度单板质量较佳。尾叶桉木材制造胶合板较佳工艺参数:热压温度为130℃、单位压力为1.4 MPa、热压时间为1.35 min·mm-1、涂胶量为320 g·m-2。工艺条件对板材性能均有影响,桉树木材龄级对板材性能影响显著,随着桉树龄级的增大,板材性能有较大幅度提高,特别是静曲强度、弹性模量影响最为明显。  相似文献   

数字图像处理技术在木材微观结构研究中的应用概况     

孙鑫  常建民 《林业机械与木工设备》2010,38(3):14-16,20

对木材微观结构的研究始终是木质材料学发展的难点，数字图像处理技术的引入不仅带来了对此问题的高效解决方案，更展示出了广阔的研究前景，分析并总结了国内外该项技术在木材微观结构研究中的进展和应用。  相似文献   

基于ANSYS的木质基复合材料的静力学分析   总被引：1，自引：1，他引：0  

胡志栋  赵小强 《森林工程》2010,26(5):37-40,86

采用有限元软件ANSYS对木质基复合板进行静力分析,分析其在加载过程中的位移和应力等情况,得出材料的变形及受力规律,以便人们在板的制作过程中对其大应力及大位移区做特殊处理,保证在使用过程中不因结构的部分失效而影响整个结构的工作。本文中分别就不同铺层方向四层结构复合板以及相同铺层方向单、四层等厚度板分别建立模型,并在相同受力与约束情况下进行静力学分析,得出一些对生产实际具有指导意义的结论。  相似文献