Production of particleboard with steam-injection     

Mr. T. Hata  Dr. S. Kawai  Prof. Dr. H. Sasaki 《Wood Science and Technology》1990,24(1):65-78

  相似文献   

Rapid production of high-strength cement-bonded particleboard using gaseous or supercritical carbon dioxide     

Dede Hermawan  Toshimitsu Hata  Kenji Umemura  Shuichi Kawai  Wakatsu Nagadomi  Yasuo Kuroki 《Journal of Wood Science》2001,47(4):294-300

This study deals with the effects of curing treatment with gaseous and supercritical carbon dioxide on the properties of cement-bonded particleboard (CBP) manufactured by the conventional cold-pressing method. The hydration of cement and the mechanism of improvement were examined using X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observations. The results are as follows: (1) The curing of cement was accelerated concomitantly with the improvement in mechanical and dimensional properties of CBP significantly by curing with gaseous or supercritical carbon dioxide. (2) Supercritical carbon dioxide curing imparted boards optimal properties at a faster rate than did gaseous curing. (3) Accelerated formation of calcium silicate hydrate and calcium carbonate and the interlocking of those hydration products on the wood surface are potentially the main reasons for the superior strength of carbon dioxide-cured boards.  相似文献   

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber     

Toshihiro Hata  Kenji Umemura  Hidefumi Yamauchi  Akihiro Nakayama  Shuichi Kawai  Hikaru Sasaki 《Journal of Wood Science》2001,47(2):115-123

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.  相似文献   

Fire-resistant performance of a laminated veneer lumber joint with metal plate connectors protected with graphite phenolic sphere sheeting     

Bambang Subyakto  Toshimitsu Hata  Isamu Ide  Shuichi Kawai 《Journal of Wood Science》2001,47(3):199-207

Creep under fire of laminated veneer lumber (LVL) joined with metal connectors was studied. The fire-resistant performance of LVL butt joints connected with metal plates protected with graphite phenolic sphere (GPS) sheeting was discussed. The GPS sheeting was overlaid on the joint in different sizes and locations. The joint was exposed to a burner with a top flame temperature of 800°C and loaded with a load of 200 N to test for creep under fire. The results showed that the fire-resistant performance of the joint was markedly improved by the sheeting. The size and location of the GPS sheet significantly affected the time to rupture of the specimen, which was six times longer than that without GPS. Temperature measurements at the joint showed that the GPS sheeting distributed the heat along the surface and delayed failure. Thermographic images and analyses clarified the improvement in fire-resistant properties due to GPS.  相似文献   

Effects of acorn attack by curculio weevils on the germination and early growth of <Emphasis Type="Italic">Pasania edulis</Emphasis> (Makino) seedlings     

Koichi Sone  Keita Oishi  Tatsuya Shibato  Kunihiko Hata 《Journal of Forest Research》2016,21(4):185-192

We conducted field studies to evaluate the impact that curculio weevil attacks on Pasania edulis (Fagacea) acorns have on the regeneration of this tree. The germination ratio of weevil-attacked acorns was significantly lower than that of sound acorns. The number and position of the attacks on acorns affected the germination ratio. The seedlings from weevil-attacked acorns were shorter and had a smaller leaf area than those from sound acorns. The negative effects on seedling height lasted for at least three years after germination. We also studied the handling of the two types of acorns by granivorous Apodemus mice in a broad-leaved forest dominated by P. edulis. The mice picked up, transported, hoarded, and recovered sound and weevil-attacked acorns similarly. In the study site, the seedlings from weevil-attacked acorns were estimated to account for 1.5–20.4 % of the total seedlings for cohorts of mast years and 0–3.7 % for those of poor or medium acorn production. From these results, we conclude that acorns with the lower part of their cotyledons slightly damaged by weevil larvae might still be able to contribute to the regeneration of P. edulis in the field but that their contribution would be negligible or small even in mast years in this study site.  相似文献   

Sapstain fungi on <Emphasis Type="Italic">Pinus radiata</Emphasis> logs – from New Zealand Forest to export in Japan     

Joanne M.?Thwaites  Roberta L.?FarrellEmail author  Kunio?Hata  Peter?Carter  Marco?Lausberg 《Journal of Wood Science》2004,50(5):459-465

Supply of clear, unstained logs from an export country is important economically as well as in reducing the biosecurity risk to an importing country such as Japan. Although conditions found within the holds of ships containing logs are thought to be ideal for rapid colonization of sapstain fungi, no research has been conducted. Research-focussed log export trials were designed to determine the extent of sapstain colonisation at specific points in the processing of logs from harvesting to arrival at the export destination. Two trials were established, in the austral summer and winter, in which mature Pinus radiata logs were harvested in New Zealand and shipped to export ports in Japan. Data loggers placed above and below deck of the ships recorded microclimatic conditions. Nine species of sapstain fungi were isolated from logs during the summer trial; the most common species isolated were Ophiostoma floccosum, Ophiostoma querci, and Ophiostoma setosum. In contrast, ten sapstain species were detected during the winter trial, with Sphaeropsis sapinea, O. querci, O. floccosum, and O. setosum most commonly isolated. This research was the first successful attempt at measuring visual sapstain development and isolating sapstain fungi from the time of harvesting to arrival at an export destination.  相似文献   

Fire protection of a laminated veneer lumber joint by wood carbon phenolic spheres sheeting     

Subyakto  Toshimitsu?Hata  Isamu?Ide  Takeshi?Yamane  Shuichi?KawaiEmail author 《Journal of Wood Science》2004,50(2):157-161

Laminated veneer lumber joints made with metal plate connectors were protected with wood carbon phenolic spheres (CPS) sheeting and tested for creep under fire. The effects of the carbonizing temperature of charcoal, used as raw material for the CPS sheets, the thickness, and the location of the sheet on the joint regarding the fire-resistance performance of the joint were studied. The time to rupture of the joints covered with CPS sheets made from charcoal carbonized at 800°C (CPS800) was slightly prolonged compared with that of uncovered joints. On the other hand, the time to rupture of CPS sheets made from charcoal carbonized at 1600°C (CPS1600) was markedly extended. The changes in the charcoal properties due to increasing the carbonizing temperature might be the main reason the CPS1600 sheets had higher fire-resistance performance. The thickness and location of CPS1600 sheets have significant effects on the fire resistance of the joint. A highly fire-resistant laminated veneer lumber joint was obtained using a CPS1600 sheet. The CPS1600 sheet with a thickness of 3mm covering three sides of the joint prolonged the time to rupture 16-fold compared with that of unprotected joints.Part of this paper was presented at the 4th International Wood Science Symposium, Serpong, Indonesia, September 2002  相似文献   

Seasonal parasitism of native egg parasitoids of brown marmorated stink bug (Halyomorpha halys) in Japan     

Kamiyama  Matthew T.  Matsuura  Kenji  Hata  Toshimitsu  Yoshimura  Tsuyoshi  Yang  Chin-Cheng Scotty 《Journal of pest science》2022,95(3):1067-1079

Journal of Pest Science - The invasive, Halyomorpha halys (Hemiptera: Pentatomidae), is a severe economic insect pest native to East Asia. A strong effort has been made to identify natural egg...  相似文献   

A rubberlike stretchable active matrix using elastic conductors     

Sekitani T  Noguchi Y  Hata K  Fukushima T  Aida T  Someya T 《Science (New York, N.Y.)》2008,321(5895):1468-1472

By using an ionic liquid of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide, we uniformly dispersed single-walled carbon nanotubes (SWNTs) as chemically stable dopants in a vinylidene fluoride-hexafluoropropylene copolymer matrix to form a composite film. We found that the SWNT content can be increased up to 20 weight percent without reducing the mechanical flexibility or softness of the copolymer. The SWNT composite film was coated with dimethyl-siloxane-based rubber, which exhibited a conductivity of 57 siemens per centimeter and a stretchability of 134%. Further, the elastic conductor was integrated with printed organic transistors to fabricate a rubberlike active matrix with an effective area of 20 by 20 square centimeters. The active matrix sheet can be uniaxially and biaxially stretched by 70% without mechanical or electrical damage. The elastic conductor allows for the construction of electronic integrated circuits, which can be mounted anywhere, including arbitrary curved surfaces and movable parts, such as the joints of a robot's arm.  相似文献   

Macrolides and lincomycin susceptibility of Mycoplasma hyorhinis and variable mutation of domain II and V in 23S ribosomal RNA     

Kobayashi H  Nakajima H  Shimizu Y  Eguchi M  Hata E  Yamamoto K 《The Journal of veterinary medical science / the Japanese Society of Veterinary Science》2005,67(8):795-800

A total of 151 strains of Mycoplasma hyorhinis isolated from porcine lung lesions (weaned pigs, n=71, and finishers, n=80) were investigated for their in vitro susceptibility to 10 antimicrobial agents. Thirty-one strains (28 from weaned pigs and 3 from finishers) showed resistance to 16-membered macrolide antibiotics and lincomycin. The prevalence of the 16-membered macrolide-resistant M. hyorhinis strain in weaned pigs from Japanese herds has approximately quadrupled in the past 10 years. Several of the 31 strains were examined for mutations in the 23S ribosomal RNA (rRNA). All field strains tested showed a transition of A to G at position 2059 of 23S rRNA-rendered Escherichia coli. On the other hand, individual tylosin- and lincomycin-resistant mutants of M. hyorhinis were selected in vitro from the susceptible type strain BTS7 by 3 to 9 serial passages in subinhibitory concentrations of each antibiotic. The 23S rRNA sequences of both tylosin and lincomycin-resistant mutants were compared with that of the radical BTS7 strain. The BTS7 mutant strain selected by tylosin showed the same transition as the field-isolated strains of A2059G. However, the transition selected in lincomycin showed mutations in domains II and V of 23S rRNA, G2597U, C2611U in domain V, and the addition of an adenine at the pentameric adenine loop in domain II. The strain selected by lincomycin showed an additional point mutation of A2062G selected by tylosin.  相似文献