排序方式： 共有28条查询结果，搜索用时 15 毫秒
1.
Artemisia pallens Bess. is a low volume and high value essential oil plant used in perfumery, cosmetic and flavouring industries. On account
of the failure of conventional procedures to induce variability in species, mutation techniques have been tried in our experiments.
Dry and viable seeds (moisture content 8%) of homozygous pure breeding lines were subjected to 150–500 Gy doses of gamma rays
and 0.01–0.1% ethyl methane sulphonate (EMS) for 8 h. Desirable qualitative mutants were recovered from segregating M2 generation (4,283 plants scored) raised as single plant progenies. The spectrum of morphological mutants included late and
early flowering types; bushy and high yielding types; tall and more capitula-producing types and high oil and high davanone
yielding types. These were raised through M3 families to evaluate stability and transmission of mutant characters. As such out of 15 different types selected in M2, only 11 types bred true to their characteristic variability. Based on their performance, the mutants were characterised
depending upon their distinguishing features. Davanone, the main component of oil showed the maximum increase (64.22% against
54.64% in control) in mutant ‘S–5’ recovered from exposure with 250 Gy γ-rays. Mutant ‘E-6’ was economically most viable having
increased oil biosynthesis (0.36% against 0.22% in control) and hence yields higher oil per unit area than the parental control
(isolated from 0.05% EMS treatment). 相似文献
2.
Tusar K. Behera Jack E. Staub Snigdha Behera Isabelle Y. Delannay Jin Feng Chen 《Euphytica》2011,178(2):261-272
Cucumber (Cucumis sativus L.) is a major cucurbit vegetable species whose genetic base has been drastically reduced during its domestication. The crop’s
narrow genetic base (3–12% DNA polymorphism) has resulted from the use of limited genetic material and intense selection during
plant improvement. Recently, however, interspecific hybridization has been successful in Cucumis via mating of C. hystrix Chakr. and C. sativus, which resulted in the amphidiploid C. hytivus. We report herein a marker-assisted strategy for increasing genetic diversity in cucumber through introgression backcrossing
employing C. hytivus. The comparatively late-flowering but high-yielding, indeterminate, monoecious line WI 7012A (P1; donor parent) derived from a C. hytivus × C. sativus-derived line (long-fruited Chinese C. sativus cv. Beijingjietou) was initially crossed to the determinate, gynoecious C. sativus line WI 7023A (P2; recurrent parent 1), and then advanced backcross generation progeny (BC2) were crossed with the gynoecious indeterminate line WI 9-6A (P3; recurrent parent 2). More specifically, a single F1 individual (P1 × P2) was backcrossed to P2, and then BC progeny were crossed to P2 and P3, where marker-assisted selection (MAS) for genetic diversity (8 mapped and 16 unmapped markers; designated Sel) or no selection
(designated NSel) was applied to produce BC3P2 (Sel) and BC3P3 (Sel), and BC2P2 (NSel) and BC2P2S1 (NSel) progeny. Relative vegetative growth, number of lateral branches (LB), days to flowering (DF), yield (fruit number),
and fruit quality [as measured by length:diameter (L:D) and endocarp:total diameter (E:T) ratios] were assessed in parents
and cross-progeny. DF varied from ~20 (BC3P2Sel) to ~25 days (BC2P3Sel) among the populations examined, where progeny derived from P2 possessed the shortest DF. Differences in cumulative yield among the populations over six harvests were detected, varying
from ~8 fruits per plant in BC3P2 (Sel) to ~39 fruits per plant in BC2P3 (Sel). Although the vigorous vegetative growth of line P1 was observed in its backcross progeny, highly heterozygous and polymorphic backcross progeny derived from P3 were comparatively more vigorous and bore many high-quality fruit. Response to selection was detected for LB, DF, L:D, and
E:T, but the effectiveness of MAS depended upon the parental lines used. Data indicate that the genetic diversity of commercial
cucumber can be increased by introgression of the C. hystrix genome through backcrossing. 相似文献
3.
Deb Manas Kanti Thakur Manisha Mishra R. K. Bodhankar Ninad 《Water, air, and soil pollution》2002,140(1-4):57-71
An assessment of arsenic contamination in Raipur city (21°14′N, 18°38′E) of Chhattisgarh in the central part of India is reported here, for a monitoring period between November 1996 to June 1997, in airborne dust particulates. The concentration level of As were higher in the industrial site, followed by heavy traffic as compared to other sites. The monthly atmospheric arsenic deposition, in μg As per g of dust fall, of 6 sites are in the range of 0.100(μ0.020)–4.00(μ0.020); site no. 1 industrial area, 0.100(μ0.020)–0.320(μ0.020); site no. 2 residential area, 0.044(μ0.070)–0.337(μ0.030); site no. 3 commercial area, 0.093(μ0.068)–1.870(μ0.020); site no. 4 residential area, 0.111(μ0.020)–1.912(μ0.010); site no. 5 residential area and 0.068(μ0.040)–3.037(μ0.060); site no. 6 heavy traffic area. The total annual flux of As in the fall-out at different zones is in the range 0.033–1.12 kg km-2 yr-1. The month wise collection and analysis of dust fall out rate between 3.0(μ0.10)–91.3(μ1.4) mt (metric tonnes) km-2 month-1 were observed at all 6 sampling sites. Anthropogenic and environmental factors play important roles in the contribution of arsenic in airborne particulate matters. 相似文献
4.
Gograj Singh Jat Anilabh Das Munshi Tusar Kanti Behera Harshwardhan Choudhary Prasanta Dash Amarnath Ravindran 《The Journal of Horticultural Science and Biotechnology》2019,94(1):24-32
Gynoecious is an important economic trait of cucumber for determinant of earliness and yield, yet genetic mechanism is not well understood for this trait. The experiment was conducted using F2 mapping population by crossing of PPC-2, a gynoecious and parthenocarpic line with Pusa Uday (monoecious and non-parthenocarpic cultivar). Out of 179 SSR markers screened, 39 markers differentiated the gynoecious and monoecious parents. However, only 17 markers were segregating with F2 mapping population, those were used for genotyping and linkage map analysis and these markers were placed along with F locus on chromosome 6 covering a total distance of 100.4cM. The SSR markers, SSR13251 and UW020605 were found to be closely linked to gynoecious (F) locus at 1.0 and 4.5 cM, respectively. The segregation of F2 population of PPC-2 × Pusa Uday and GPC-1 × Punjab Naveen and test crosses for sex type herein suggested that single dominant gene controlled the gynoecious sex expression in cucumber particularly in gynoecious genotypes PPC-2 and GPC-1. Therefore, the monogenic dominant nature of gynoecious sex identified in the present experiment and SSR markers closely linked to the F locus will be useful in marker-assisted backcross breeding for transfering gynoecious trait into horticulturally desirable varieties. 相似文献
5.
6.
7.
The present study deals with the synthesis and subsequent application of Fe3O4@n-SiO2 nanoparticles for the removal of Cr(VI) from aqueous solutions. Rice husk, an agrowaste material, was used as a precursor for the synthesis of nanoparticles of silica. Synthesized nanoparticles were characterized by XRD and SEM to investigate their specific characteristics. Fe3O4@n-SiO2 nanoparticles were used as adsorbent for the removal of Cr(VI) from their aqueous solutions. The effects of various important parameters, such as initial Cr(VI) concentration, adsorbent dose, temperature, and pH, on the removal of Cr(VI) were analyzed and studied. A pH of 2.0 was found to be optimum for the higher removal of Cr(VI) ions. It was observed that removal (%) decreased by increasing initial Cr(VI) concentration from 1.36?×?10-2 to 2.4?×?10-2 M. The process of removal was found to be endothermic, and the removal increased with the rise in temperature from 25 to 45 °C. The kinetic data was better fitted in pseudo-second-order model in comparison to pseudo-first-order model. Langmuir and Freundlich adsorption capacities were determined and found to be 3.78 and 1.89 mg/g, respectively, at optimum conditions. The values of ΔG 0 were found to be negative at all temperatures, which confirm the feasibility of the process, while a positive value of ΔH 0 indicates the endothermic nature of the adsorption process. The present study revealed that Fe3O4@n-SiO2 nanoparticles can be used as an alternate for the costly adsorbents, and the outcome of this study may be helpful in designing treatment plants for treatment of Cr(VI)-rich effluents. 相似文献
8.
Kumar Rahul Das Munshi Anilabh Behera Tusar Kanti Jat Gograj Singh Choudhary Harshawardhan Talukdar Akshay Dash Prasanta Singh Deepak 《Genetic Resources and Crop Evolution》2022,69(5):1901-1917
Genetic Resources and Crop Evolution - In several regions of the world, low productivity in this crop is attributed to several factors including poor understanding of the genomic complexity of... 相似文献
9.
The adsorption capacity of pine tree leaves for removal of methylene blue (MB) from aqueous solution was investigated in a batch system. The effects of the process variables, such as solution pH, contact time, initial dye concentration, amount of adsorbent, agitation speed, salt concentration, and system temperature on the adsorption process were studied. The extent of methylene blue dye adsorption increased with increase in initial dye concentration, contact time, agitation speed, temperature, and solution pH but decreased with increased in amount of adsorbent and salt concentration. Equilibrium data were best described by both Langmuir isotherm and Freundlich adsorption isotherm. The maximum monolayer adsorption capacity of pine tree leaves biomass was 126.58?mg/g at 30?°C. The value of separation factor, R L , from Langmuir equation and Freundlich constant, n, both give an indication of favorable adsorption. The intrapartical diffusion model, liquid film diffusion model, double exponential model, pseudo-first and second order model were used to describe the kinetic and mechanism of adsorption process. A single stage bath adsorber design for the MB adsorption onto pine tree leaves has been presented based on the Langmuir isotherm model equation. Thermodynamic parameters such as standard Gibbs free energy (??G 0), standard enthalpy (??H 0), and standard entropy (??S 0) were calculated. 相似文献