Catalog of Micro-Tom tomato responses to common fungal, bacterial, and viral pathogens     

Hideki Takahashi  Ayano Shimizu  Tsutomu Arie  Syofi Rosmalawati  Sumire Fukushima  Mari Kikuchi  Yasufumi Hikichi  Ayami Kanda  Akiko Takahashi  Akinori Kiba  Kohei Ohnishi  Yuki Ichinose  Fumiko Taguchi  Chihiro Yasuda  Motoichiro Kodama  Mayumi Egusa  Chikara Masuta  Hiroyuki Sawada  Daisuke Shibata  Koichi Hori  Yuichiro Watanabe 《Journal of General Plant Pathology》2005,71(1):8-22

Lycopersicon esculentum cultivar Micro-Tom is a miniature tomato with many advantages for studies of the molecular biology and physiology of plants. To evaluate the suitability of Micro-Tom as a host plant for the study of pathogenesis, Micro-Tom plants were inoculated with 16 well-known fungal, bacterial, and viral pathogens of tomato. Athelia rolfsii, Botryotinia fuckeliana, Oidium sp., Phytophthora infestans, and Sclerotinia sclerotiorum caused typical symptoms and sporulated abundantly on Micro-Tom. Micro-Tom was resistant to Alternaria alternata, Corynespora cassiicola, and Fusarium oxysporum. When Micro-Tom was inoculated with 17 isolates of Ralstonia solanacearum, many isolates induced wilt symptoms. Agrobacterium tumefaciens also was pathogenic, causing crown galls on stem tissue after needle prick inoculation. In Micro-Tom sprayed with Pseudomonas syringae pv. tomato, P. s. pv. tabaci, or P. s. pv. glycinea, bacterial populations did not increase, and yellow lesions appeared only on leaves sprayed with P. s. pv. tomato. Tomato mosaic virus, Tomato aspermy virus, and Cucumber mosaic virus systemically infected Micro-Tom, which developed symptoms characteristic of other cultivars of tomato after infection with the respective virus. These results indicated that Micro-Tom was generally susceptible to most of the important tomato pathogens and developed typical symptoms, whereas certain pathogens were restricted by either hypersensitive resistance or nonhost resistance on Micro-Tom. Therefore, an assortment of Micro-Tom–pathogen systems should provide excellent models for studying the mechanism of susceptible and resistant interactions between plants and pathogens.  相似文献   

Fine structure and differentiation of the alimentary canal in captive-bred Japanese eel Anguilla japonica preleptocephali     

Yuichi Ozaki  Hideki Tanaka  Hirohiko Kagawa  Hiromi Ohta  Shinji Adachi  Kohei Yamauchi 《Fisheries Science》2006,72(1):13-19

ABSTRACT:   The fine structure of the alimentary canal in preleptocephali produced by artificially matured Japanese eel was examined. At 1 day posthatch (dph), the alimentary canal was found only above the dorsal side of the yolk mass, and the epithelium was composed of a single layer of epithelial cells. By 5 dph, the alimentary canal was divided into three segments based on the structure of the epithelial cells: foregut, midgut and hindgut, corresponding to the future esophagus, intestine and rectum, respectively. After 7 dph, the epithelium in the foregut was surrounded by a circular muscle layer, suggesting a role in the transportation of food materials. The epithelial cells of the midgut exhibited well-developed membranous structures, which are deduced to be invaginations of the cytoplasmic membrane. Pinocytotic invaginations and vacuoles were observed in the epithelial cells of the hindgut; this observation suggests that this region is involved in the uptake of food. Significant changes in morphological features of the epithelial cells in each segment were observed until 7 dph; however, these were not evident between 7 dph and 13 dph. Consequently, the differentiation of the alimentary canal was completed by 7 dph, and preleptocephalus had developed the ability to absorb food by 7 dph.  相似文献   

Development of an in vitro culture system for producing eel larvae from immature ovarian follicles in Japanese eel <Emphasis Type="Italic">Anguilla japonica</Emphasis>     

Tomoki Abe  Shigeho Ijiri  Shinji Adachi  Kohei Yamauchi 《Fisheries Science》2010,76(2):257-265

To standardize conditions during the final maturation and ovulation of ovarian follicles from Japanese eel, we have developed a culture system for the production of fertilizable eggs from post-vitellogenic ovarian follicles in vitro. Post-vitellogenic ovarian follicles were incubated in culture medium supplemented with 17α,20β-dihydroxy-4-pregnen-3-one (DHP) with or without bovine serum albumin (BSA) to assess the effects of protein concentration. Eggs that ovulated during incubation were fertilized, and the remaining follicles were incubated in prostaglandin F_2α (PGF_2α) for a further 3 or 6 h before fertilization. Male eels were injected repeatedly with human chorionic gonadotropin. The quality of eggs obtained under the different culture conditions was evaluated after artificial fertilization in terms of hatching success. Hatching rates tended to decrease with increasing concentrations of BSA in the incubation medium in a dose-dependent manner. The addition of PGF_2α drastically increased the number of eggs that ovulated, but the rate of hatching was greatly decreased compared with eggs obtained earlier by DHP incubation alone. The larvae obtained from artificially fertilized eggs produced in vitro survived for 14 days without feeding. We conclude that in vitro culture systems thus have a great potential for the acquisition of good quality eggs under tightly controlled artificial conditions, culminating in the production of eel larvae.  相似文献   

Effects of heat stress on the endometrial epidermal growth factor profile and fertility in dairy cows     

Kohei KAWANO  Yojiro YANAGAWA  Masashi NAGANO  Seiji KATAGIRI 《The Journal of reproduction and development》2022,68(2):144

The endometrial epidermal growth factor (EGF) profile is an indicator of uterine function and fertility in cattle. The present study aimed to investigate the effects of heat stress on the endometrial EGF profile and fertility in lactating Holstein cows. The endometrial EGF profiles of 365 cows in the Hokkaido and Kyushu regions were examined between June and September (heat stress period, n = 211) and between October and January (control period, n = 154). EGF profiles were investigated using uterine endometrial tissues obtained by biopsy 3 days after estrus (Day 3). The proportion of cows with an altered EGF profile was higher between June and September than between October and January (41.2 vs. 16.2%, P < 0.05). The effects of rectal temperature on Days 0 and 3 on the endometrial EGF profile were also assessed in cows (n = 79) between June and September in the Kyushu region. A single embryo was transferred to cow on Day 7 to evaluate fertility (n = 67). Regardless of the rectal temperature on Day 3, the proportion of cows with an altered EGF profile was higher (64.1 vs. 30.0%, P < 0.05) and the pregnancy rate after embryo transfer (ET) was lower (26.7 vs. 51.4%, P < 0.05) in cows with a rectal temperature ≥ 39.5°C on Day 0 than in cows with a rectal temperature < 39.5°C on Day 0. The present results indicate that alterations in the endometrial EGF profile induced by an elevated body temperature on Day 0 contributed to reductions in fertility in lactating dairy cows during the heat stress period.  相似文献   

Seasonal atopic dermatitis in dogs sensitive to a major allergen of Japanese cedar (Cryptomeria japonica) pollen     

Masuda K  Sakaguchi M  Saito S  Deboer DJ  Yamashita K  Hasegawa A  Ohno K  Tsujimoto H 《Veterinary dermatology》2002,13(1):55-61

Three dogs were examined because of episodes of recurrent pruritic dermatitis in the spring, the season of Japanese cedar (Cryptomeria japonica, CJ) pollination in Japan. The dogs were shown to be sensitive to CJ pollen allergen using intradermal testing and antigen-specific IgE measurement. Fluorometric enzyme-linked immunosorbant assay (ELISA) showed increased concentrations of IgE specific to Cry j 1 and a negative result for Cry j 2 in the three dogs. The concentrations of IgE specific to Cry j 1 during the season of CJ pollination were higher than the concentrations found during the off-season in all the dogs, and the variation in the concentrations correlated with the variation in clinical signs. Peripheral blood mononuclear cells showed apparent proliferative responses to crude CJ pollen antigen and Cry j 1 during CJ pollination season. These findings indicated that Cry j 1 was the major allergen recognized by IgE and lymphocytes and resulted in the development of type I hypersensitivity to CJ pollen allergen in these atopic dogs.  相似文献   

Developmental changes in pituitary–thyroid axis, and formation of gonads in leptocephali and glass eels of Anguilla spp.     

Yuichi Ozaki  Hiromi Okumura  Yukinori Kazeto  Toshitaka Ikeuchi  Shigeho Ijiri  Masaki Nagae  Shinji Adachi and  Kohei Yamauchi 《Fisheries Science》2000,66(6):1115-1122

SUMMARY: Pituitary, thyroid gland and gonads in leptocephali of Japanese eel Anguilla japonica (19.8–32.6 mm in total length), A. obscura (45.0 mm), and A. bicolor pacifica (49.5 mm) and those in glass eels of the Japanese eel were histologically and immunohistochemically examined in order to observe the developmental changes of these endocrine organs in the Anguillidae. The pituitary, consisting of adenohypophysis and neurohypophysis in Japanese eel leptocephali over 22.5 mm, did not contain thyroid stimulating hormone (TSH) immunoreactive cells. Such cells were, however, detectable in the more developed pituitaries of leptocephali of A. obscura and A. bicolor pacifica and in those of glass eels. Conversely, thyroxine (T₄)-immunoreactive thyroid follicles could be detected in all specimens, both leptocephalic and glass eel. Only in glass eels, gonads were found in the body cavity, and these gonads harbored one or two primordial germ cells (PGC) per cross-section. Our results indicate that thyroid hormones (TH) production started prior to TSH production, and that TSH and TH are both secreted during the metamorphosis from leptocephalus to glass eel. Therefore, it is plausible that the TSH–TH axis is involved in the metamorphosis from leptocephalus to glass eel, but not in the early growth from preleptocephalus to leptocephalus.  相似文献   

Development of wooden portal frame structures with improved columns     

Masahiro Noguchi  Shinjiro Takino  Kohei Komatsu 《Journal of Wood Science》2006,52(1):51-57

In Japan, the lifetime cycle of most housing lasts around 20–30 years. A governing factor in this respect is poor durability due to old-fashioned use of the house. As a solution of this problem, houses can be built with a skeleton structure that allows free partition of spaces by future owners. To develop the skeleton structure effectively, multistory frames with spans of 6 to 10 m are required. For this reason, attention has been focused on the behavior of multistory timber frame structures. In this article, two types of wooden portal frame structures are proposed. Both structures have improved vertical columns with short horizontal members glued in. The aim of this study was to investigate structurally effective solutions with these types of columns. The first type of the new structure changed the location of the moment-transmitting ductile connection with the improved columns. The second type of structure used an extended panel zone. Nine portal frame specimens were tested. The stiffness values were improved by around 1.7 and 3.5 times when compared with the control, and the strength was improved by around 1.25 and 1.45 times.  相似文献   

云杉胶合木钢板斜螺钉连接的剪切性能研究     

鹿相戎  滕启城  李哲瑞  张晓兰  王昕萌  小松幸平  阙泽利 《林业工程学报》2020,5(3):48-53

为准确评价斜螺钉连接钢 木节点的剪切性能,探明其受力机理,以云杉胶合木、钢板和自攻螺钉作为研究材料,测试不同荷载方向与受力情况下斜螺钉连接节点的承载性能,将试验数据与国外规范中的计算模型进行对比,提高了侧边钢板 胶合木(钢 木)斜螺钉连接节点承载性能的预测能力。结果表明:自攻螺钉与剪切面之间的角度变化对其在钢 木节点承受剪 压复合应力的承载力影响不明显,当偏转为剪 拉复合应力时,节点承载力明显增大,并在30°~45°获得最大值;剪 压复合应力时,现行EC5公式计算剪 压节点的极限承载力非常不安全;EC5的刚度预测结果在剪 压复合应力区和垂直剪切面钉入时,与试验值吻合度很高,但对剪 拉区节点的滑移模量没有预测性;将Tomasi模型应用于斜螺钉连接钢 木节点滑移模量理论计算时,在45°~90°时与试验值吻合度极高。单颗自攻螺钉的抗拔刚度计算节点滑移模量的方法极为有效,具有较高的借鉴意义。  相似文献   

Dynamic excitation and static loading tests of glulam lattice floor     

Masaki?HaradaEmail author  Kohei?Komatsu  Tomoyuki?Hayashi  Masahiko?Karube 《Journal of Wood Science》2004,50(5):450-454

A wooden lattice floor with high stiffness and damping capacity has been developed to solve noise problems in wooden apartment houses. The lattice floor consisted of Douglas fir glulam beams with inserted steel plate joints and drift pins. To examine the structural performance of the floor, dynamic excitation and static loading tests were conducted on the full size floor. The first and second order resonance frequencies of the floor were 13.5Hz and 27.0Hz, respectively. These frequencies are similar to the peak frequency of a conventional wooden floor and the combined floor fabricated from glued laminated timber and iron. The maximum static load of the floor was 127kN. The apparent flexural rigidity was less than half the value of several floors studied in the past. However, it is considered that the stiffness is improved by constructing panels and this floor has almost equivalent performance. Relative deflection was not affected by the loading history.Part of this study was presented at the International Wood Engineering Conference, New Orleans, October 1996.  相似文献   

On mechanical behavior of traditional timber shear wall in Taiwan I: background and theory derivation   总被引：1，自引：0，他引：1  

Wen-Shao Chang  Kohei Komatsu  Min-Fu Hsu  Wei-Jye Chen 《Journal of Wood Science》2007,53(1):17-23

The objectives of this study were to explore the mechanical behavior of traditional timber shear walls in Taiwan and to propose a theoretical model to predict their lateral force resistance. An extensive field investigation was conducted, and the dimensions, tectonic detail, and materials used were recorded. The data collected were used as the reference for theoretical derivation and experimental design. In the theoretical model, the moment resistance of entire shear walls was derived from the contributions of the moment-resisting capacity supplied not only by embedment and friction action between board units and beams but also the dowel action of bamboo nails. Timber shear walls with various geometric conditions and material properties are considered. The theoretical model demonstrated in this study can be used to predict the mechanical behavior of timber shear walls and will be verified by experiments in our next article.  相似文献