排序方式： 共有32条查询结果，搜索用时 15 毫秒
1.
Buskirk DD Zanella AJ Harrigan TM Van Lente JL Gnagey LM Kaercher MJ 《Journal of animal science》2003,81(1):109-115
One hundred sixty beef cows (631 +/- 78 kg) were used to evaluate the quantity of hay loss and feeding behaviors from different round bale feeders. Twenty cows were allotted by weight and body condition score to one of eight pens with four feeder designs: cone, ring, trailer, or cradle. All feeder types provided approximately 37 cm of linear feeder space per animal. Alfalfa and orchardgrass round bales were weighed and sampled before feeding. Hay that fell onto the concrete surrounding the feeder was considered waste and was collected and sampled daily. At the end of a 7-d period, each feeder type was assigned to a different pen for a second 7-d period. On four consecutive days in each period, animal behavior was recorded using a time-lapse video system. Data were collected from 5-min observational intervals from the video tapes every 0.5 h each day. Feeder access, occupancy rate, and occurrence of agonistic interactions were recorded. Dry matter hay waste was 3.5, 6.1, 11.4, and 14.6% for the cone, ring, trailer, and cradle feeders, respectively. Calculated dry matter intake of hay ranged from 1.8 to 2.0% of body weight and was not different among feeder type (P < 0.05). Percentage of organic matter, neutral detergent fiber, acid detergent fiber, and crude protein were all lower and acid detergent lignin was higher in the recovered waste compared to the hay fed (P < 0.05). Cows feeding from the cradle feeder had nearly three times the agonistic interactions and four times the frequency of entrances compared to cows feeding from the other feeder types (P < 0.05). Feed losses were positively correlated with agonistic interactions, frequency of regular and irregular entrances, and feeder occupancy rate (P < 0.05). Agonistic interactions by cows and frequency of feeder entrances differed among feeders and were correlated to feeder design induced feed losses. 相似文献
2.
Tjardes KE Buskirk DD Allen MS Ames NK Bourquin LD Rust SR 《Journal of animal science》2000,78(11):2957-2965
The brown midrib-3 (bm3) gene mutation has been incorporated into corn plants to potentially improve fiber digestibility. The objectives of this study were to determine the effect of bm3 corn silage on digestion and performance of growing beef steers and to determine whether limiting intake would further enhance fiber digestibility of bm3 corn silage. A bm3 hybrid and its isogeneic normal counterpart were harvested at three-quarters kernel milk line. Neutral detergent fiber, ADF, and ADL were 4.5, 6.9, and 1.9 units lower, respectively, and DM was 5.4 units higher for bm3 than for normal silage. In Trial 1, eight ruminally fistulated Angus crossbred steers (224 +/- 24 kg) were randomly assigned to a 2 x 2 factorial arrangement of treatments in a replicated 4 x 4 Latin square design. Steers had ad libitum feed access or were restricted to 80% of ad libitum intake of diets containing 86% normal corn silage (Control) or bm3 corn silage (BMCS). The remainder of the diets consisted of soybean meal, urea, monensin, vitamins, and minerals. Dry matter intake was greater (P < 0.01) for steers offered ad libitum access to BMCS than for those with ad libitum access to the Control diet. The BMCS treatment resulted in improved (P < 0.05) apparent total-tract digestibility of DM, OM, NDF, and ADF. Mean concentration of total VFA and molar proportions of acetate were increased (P < 0.05) by feeding BMCS. There tended to be a DMI x hybrid interaction (P = 0.16) for apparent total-tract digestibility of NDF. When diets were offered ad libitum, BMCS increased NDF digestibility by 10.5 percentage units compared with Control, but, when DMI was limited, BMCS increased NDF digestibility by 15.8 percentage units. In Trial 2, 128 steer contemporaries of those used in Trial 1 (245 +/- 13 kg) were offered ad libitum access to BMCS or Control diets as used in Trial 1. After a 112-d treatment period, concentrate in the diet was increased, and all steers were fed a common finishing diet. During the 112-d treatment period, steers receiving BMCS consumed 0.45 kg more DM/d (P < 0.05) and had similar ADG (P > 0.10), compared with those steers receiving the Control silage. This resulted in poorer (P < 0.01) feed efficiency for steers receiving BMCS. Finishing phase and overall performance of the steers was not different (P > 0.10) due to treatment. Although feeding BMCS in growth-phase diets resulted in increased daily DMI and improved digestibility of DM and fiber, it did not result in improved steer feedlot ADG compared with Control silage. 相似文献
3.
Rupture of the suspensory ligament at the insertions on the proximal sesamoid bones, and of the superficial flexor tendon of the left fore limb, occurred in an adult Angus bull as a result of fighting. There was severe hyperextension of the metacarpophalangeal (MCP) joint with the dewclaws almost touching the ground. Radiographs revealed severe hyper-extension of the MCP joint with the sesamoid bones aligned directly distal to the metacarpus. Initially, a full length fiberglass cast was applied with the limb partially flexed within the cast and the heels elevated. The cast was replaced twice. The cast was removed after 136 days and the bull was bearing full weight on the limb. Prolonged immobilisation of the limb produced new bone in the area (a normal response in cattle) to cause ankylosis of the traumatized MCP joint and partial ankylosis of the carpus. The bull was being used for pasture breeding one year after the injury. 相似文献
4.
Mechanical comparison of materials used for extra-capsular stabilisation of the stifle joint in dogs
Objective The mechanical properties of three materials (No. 2 polypropylene, No. 5 polybutilate-coated multifilament polyester and 18, 27 and 36 kg test monofilament nylon leader material) commonly used for extra-capsular stabilisation of the stifle in dogs with cranial cruciate ligament insufficiency were determined. The ability of No. 5 polybutilate-coated multifilament polyester and 36 kg test monofilament nylon leader material, when placed as extra-capsular sutures, to mitigate cranial drawer was evaluated in hindlimbs of cadavers. Design An in vitro mechanical study. Animals Seven pairs of hindlimbs harvested from adult greyhound dogs recently euthanased for other reasons. Procedure Samples of each material, including samples of 27 kg test leader material that had been sterilised by one of three methods (ethylene oxide, one or five cycles in an autoclave), were loaded to determine tensile and stress relaxation properties. The effect of cyclic loading on a No. 5 polybutilate-coated multifilament polyester and 36 kg test leader material was also determined. Using the harvested hindlimbs, cranial drawer was measured before and after transection of the cranial cruciate ligament and on the first and twelfth cycle following extra-capsular stabilisation with either No. 5 polybu-tilate-coated multifilament suture or 36 kg test leader material. Results Leader material was found to have the most suitable mechanical characteristics for use as extracapsular stabilisation of the cranial cruciate ligament deficient stifle. Of the sterilisation methods, ethylene oxide was found to have the least detrimental effects on the handling and material characteristics of the leader material. Stifles stabilised with 36 kg test leader material had significantly less drawer than those stabilised with No. 5 polybutilate-coated multifilament polyester suture. Clinical implications Monofilament nylon leader material would appear to have suitable mechanical properties for extra-capsular stabilisation of the cranial cruciate ligament deficient stifle. If possible the material should be sterilised using ethylene oxide. 相似文献
5.
Spring-calving Angus cows (n = 24) in moderate body condition were assigned to either a high (H), maintenance-high (MH) to support superior milk, maintenance-low (ML) to support average milk, or low (L) energy diet at 12 d (SD = 4) postpartum. Energy balance for individual cows was determined by body condition change, weight change, and weigh-suckle-weigh milk production estimates. High energy intake increased (P < .05) BW, body condition score (BCS), and megacalories of body energy (BE) by 94 d postpartum. Neither dietary nor BCS accounted for significant (P > .30) variation in days to first ovulation or conception. Fasting heat production was estimated to be 72.5 kcal/BW.75 from the regression of log daily heat production/BW.75 on daily ME intake/BW.75. Rate of daily BW change did not affect concentration of energy in the weight change. Body condition score change was highly correlated (r = .98) to BW change, with each unit of BCS (1 to 5 scale) change associated with 68 kg of BW change. Two methods were used to determine NE for weight change (NE delta) based on empty body weight (EBW) change. Method 1 used the equation: BCS change = -.404 + .0147 (BW change) and Method 2 used only the regression coefficient of this equation to predict daily BCS change. Methods 1 and 2 resulted in similar regression equations: NE delta (Mcal/kg EBW change) = 1.590 + 1.251 (BCS) and NE delta (Mcal/kg EBW change) = 1.317 + 1.251 (BCS). Ranges of estimated protein and lipid in the EBW change, respectively, were 10.0 to 13.7% and 17.1 to 77.2%. 相似文献
6.
PC Sereno AL Beck DB Dutheil B Gado HCE Larsson GH Lyon JD Marcot OWM Rauhut RW Sadleir CA Sidor DD Varricchio GP Wilson JA Wilson 《Science (New York, N.Y.)》1998,282(5392):1298-1302
Fossils discovered in Lower Cretaceous (Aptian) rocks in the Tenere Desert of central Niger provide new information about spinosaurids, a peculiar group of piscivorous theropod dinosaurs. The remains, which represent a new genus and species, reveal the extreme elongation and transverse compression of the spinosaurid snout. The postcranial bones include blade-shaped vertebral spines that form a low sail over the hips. Phylogenetic analysis suggests that the enlarged thumb claw and robust forelimb evolved during the Jurassic, before the elongated snout and other fish-eating adaptations in the skull. The close phylogenetic relationship between the new African spinosaurid and Baryonyx from Europe provides evidence of dispersal across the Tethys seaway during the Early Cretaceous. 相似文献
7.
DM Magalhães DD Fernandes MBS Mororó CMG Silva GQ Rodrigues JB Bruno MHT Matos CC Campello JR Figueiredo 《Reproduction in domestic animals》2011,46(1):134-140
The aim of the present study was to evaluate the effects of different medium replacement intervals on the viability, antral cavity formation, growth and in vitro maturation (IVM) of oocytes from caprine and ovine pre‐antral follicles. Pre‐antral ovarian follicles (≥150 μm) were isolated from the ovarian cortex of goats and sheep and were individually cultured for 24 days using two different medium replacement intervals [2 days (T1) or 6 days (T2)]. Follicle development was evaluated on the basis of antral cavity formation, increases in follicular diameter and the presence of healthy cumulus oocyte complexes and fully grown oocytes. For caprine species, results showed a higher percentage (p < 0.05) of viable follicles in T1 than T2 from day 6 until the end of the culture. In addition, when comparing both treatments after the same culture duration, the rate of antrum formation was significantly higher in T1 than in T2 from day 12 onwards. Yet, in ovines, when both treatments were compared on day 24 of the culture, there were more viable follicles in T2 than in T1 (p < 0.05). In the caprine species, percentages of fully grown oocytes (≥110 μm) acceptable for IVM after 24 days of culture were significantly higher in normal follicles cultured in T1 (30.0%) than in T2 (6.7%; p < 0.05). On the other hand, in ovines, at the end of the culture, the percentage of oocytes destined for IVM was higher in T2 than in T1 (23.5% vs 2.9%; p < 0.05). In conclusion, under the same conditions, the frequency of medium replacement significantly affected the in vitro development of caprine and ovine pre‐antral follicles. To improve the efficiency of the culture system, the medium must be replaced every 2 and 6 days for goat and sheep pre‐antral follicles, respectively. 相似文献
8.
9.
10.
Scheffler JM Buskirk DD Rust SR Cowley JD Doumit ME 《Journal of animal science》2003,81(10):2395-2400
Our objective was to determine the effect of repeated use of implants on feedlot performance and carcass characteristics of Holstein cattle. Holstein steers (n = 128) weighing an average of 211 kg were blocked by weight and randomly assigned to 16 pens. At the start of the trial (d 0), pens were assigned to one of four treatments: 1) nonimplanted control (C); 2) implant on d 0, 112, and 224 (T3); 3) implant on d 112 and 224 (T2); and 4) implant on d 224 (T1). Component TE-S implants (120 mg of trenbolone acetate and 24 mg of estradiol per implant) were used for all treatments during the 291-d feeding period. Over the course of the study, T2 and T3 cattle had greater ADG and final weights than C and T1 cattle (P < 0.05). Steers were harvested at a commercial abattoir on d 291. Hot carcass weights of T3 steers were greater than those of C and T1 steers (P < 0.05). Dressing percentage, adjusted 12th-rib fat, percentage of kidney, pelvic, and heart fat, yield grade, and longissimus color were not different among treatments (P > or = 0.26). Longissimus muscle areas (LMA) of T2 and T3 carcasses were larger than LMA of C (P < 0.01). No USDA Select carcasses were produced from C cattle, whereas the percentage of Select carcasses from implanted cattle ranged from 10 to 18%. Skeletal maturity advanced (P < 0.05) progressively with each additional implant. Steaks from T3 carcasses had a higher percentage of protein than controls (P < 0.05) and were less tender than all other treatments (P < 0.05). Repeated administration of combination trenbolone acetate and estradiol implants increased ADG and resulted in heavier carcasses with larger LMA. Administration of three successive implants decreased tenderness of Holstein beef, and resulted in more advanced skeletal maturity scores. 相似文献