Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements          下载免费PDF全文

S. H. Ahmadi  M. Agharezaee  A. A. Kamgar‐Haghighi  A. R. Sepaskhah 《Soil Use and Management》2017,33(1):106-119

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.  相似文献   

Boundary-fitted grid in landscape modeling     

Kang-Ren Jin  Yegang Wu 《Landscape Ecology》1997,12(1):19-26

Landscape modeling requires the delineation of system boundaries and interior features. Quite often, these components are complex and difficult to accurately represent. A rectangular grid is used to represent the study and adjacent non-study areas in most cases. When the non-study area occupies a large portion of the grid, computer memory is wasted, and computational time increases. An elliptical grid generator for non-orthogonal curvilinear coordinates is used to generate a boundary-fitted grid for a landscape model. In a boundary-fitted grid coordinate system, one coordinate axis follows the landscape domain boundary and is non-orthogonal to the second axis. The boundary-fitted grid uses elliptic partial differential equations to distribute grid points inside the landscape domain. Although the boundary-fitted grid follows the domain boundary, the grid pattern and point allocation remain structured. Thus, a landscape model can use a boundary-fitted grid without changing the model’s data structure or the computational scheme. In this study, a boundary-fitted grid and a raster-based grid were applied to the Everglades Landscape Fire Model. Use of the boundary-fitted grid decreased model simulation time by about one fifth and computer storage by 58% relative to the raster-based grid. Also, the linear characteristics of interior geographical features such as rivers and airboat trails were preserved by the boundary-fitted grid, but not by the raster-based grid. This preservation provided a more reasonable base map for simulating ecological processes, such as fire across heterogenous landscapes.  相似文献   

春小麦蛋白质、脂肪、淀粉含量间的相关与回归分析   总被引：2，自引：0，他引：2  

孙继堂  司爱香 《甘肃农业大学学报》1989,(4):44-56

本文通过对20个春小麦品种(或品系)蛋白质、脂肪、淀粉百分含量间的相关、回归、协方差分析,表明蛋白质百分含量与淀粉百分含量间为极显著的负相关;脂肪百分含量与淀粉百分含量间为极显著的负相关;蛋白质百分含量与脂肪百分含量间为极显著的正相关。并建立了淀粉、脂肪、蛋白质百分含量间的回归方程。在同一试验条件下,各品种(或品系)蛋白质、脂肪、淀粉百分含量变异系数的大小,在一定程度上反映出各品种在品质性状上的纯合程度。变异系数愈小,表明纯合程度愈高;变异系数愈大,表明纯合程度愈低。因此,在那些变异系数较大的品种(或品系)中,可选出表型性状与原品种(或品系)基本相似,而在品质性状上却有较大提高的优质新品系。  相似文献   

Matlab在经济管理中的应用     

黄雍检 《湖南农业大学学报(自然科学版)》2005,32(2)

Matlab是功能强大的计算机软件，它在自动控制、机电和土木工程以及经济管理领域有着广泛的应用．我们给出了扩展的指派问题，且证明了该问题与原指派问题的最优值相同，然后利用Matlab语言，得到了指派问题的Matlab算法，对运输问题也给出了该问题的Matlab算法．计算实例表明，新的解题方法，既简易又精确．  相似文献   

Yield Stability of Winter Wheat (Triticum sp.) Cultivars and Lines     

M. Özgen 《Journal of Agronomy and Crop Science》1991,166(5):318-325

The purpose of this study was to compare responsiveness to environment as well as the stability of newly developed promising lines with traditional commercial cultivars. Subject research was conducted in Ankara between 1983-1989 on common and durum wheat cultivars and lines. Regression coefficient (b) was used as the criterion of genotypes' responsiveness to environment whereas deviation from regression (S²d) and coefficient of determination (r²) were used as stability parameters. Each experiment year was regarded as an environment and yield average of each year was used as the environmental index.
In consequence of the research, it was determined that new varieties with high yield, adaptable to diverse environments could be developed by means of hybridizations between parents having different genetic characteristics which were provided from diverse ecological regions.  相似文献   

推求合理畦宽的方法及应用     

孙雪峰 《中国农村水利水电》1993,(1)

为了寻求合理的节水省时畦宽,以更好地利用现有水源,在1990、1991年试验和实践的基础上,用统计回归分析方法对大城县农田畦田规格进行了分析,求出了合理畦宽,并从灌水持续时间、用电量、提水量等方面对合理畦宽的节水、节能效果进行了分析。  相似文献   

黄淮夏大豆主要农艺性状的遗传分析     

贺春林  段贵娥  柴建新 《中国油料作物学报》1993,(4)

利用黄淮地区的12个高产夏大豆品种(系),通过NCⅡ交配设计,对12个主要农艺性状的遗传进行了分析。结果表明,所有性状的加性方差大于显性方差。主茎节数、株高、每簇荚数和主茎荚数的加性成分占绝对优势,遗传力较高。分枝荚数、单株粒数和单株粒重的显性成分比例大,遗传力较低,其中单株粒重趋于完全显性。主茎节数的显性成分很少,其它性状均为部分显性。建立了单株产量与产量因子之间的逐步回归方程。  相似文献   

用受评者的得分给评委们评分     

陶为群 《安徽农业大学学报》2003,(5):78-80,90

由评委评分确定受评者的成绩，是一种普遍方式，但其中各个评委的作用识别问题却被忽视，因而无法确切地评价所选择的评委是否都很称职。本文提出根据受评者得分的总体结果，建立识别各评委作用的反馈控制，以提高选择评委的质量。因此构造了识别各评 委作用的二次规划数学模型，既适用于简单计算平均分作为受评者得分的评分模式，又适用于剔除高低分后再计算得分的评分模式，在普遍情形下得出唯一的求解结果。并且针对模型的特殊数据结构，给出了用最小二乘法求解的显式简便计算式，可以方便求解。进而使用这一方法，作了两个具体实例分析。  相似文献   

楸树自然变异与良种选择     

郭从俭  张新胜  赵北林  王华荣  楚福民  杨留成 《河南农业大学学报》1994,(4)

对楸树中７种与生长相关的变异因子进行了数量化分析，得出树高、胸径、单株立木材积的主要因子与生长的相关关系，并建立了线性回归方程。提出了良种这样及早期测定的形质性状标准。  相似文献   

东方蝾螈外部体型指数回归方程的建立     

宁方勇白秀娟  任海英 《经济动物学报》2003,7(4):52-53

为了探讨东方蝾螈在人工养殖效果评估方面 ,在确定屠宰或捕捞的大小与时间的适宜度方面 ,在生理、病理分析时 ,在治疗时间和用药量等诸方面 ,都达到取材时期的合理性问题 ,测定了东方蝾螈的身型指数 ,并初步建立了回归方程Y =- 2 5 0 +0 .6 2X1 ,并对相关数据的处理方法进行了探讨。  相似文献