Use of netting and whitewash spray to protect papaya plants against Nivun Haamir (NH)-dieback disease     

A. Franck  M. Bar-Joseph 《Crop Protection》1992,11(6):525-528

A disease causing the decline of papaya (Carica papaya) plants was noticed in the Jordan Valley in 1982. The disease caused severe yellowing of the upper leaves and dieback of the apex. The disease was not transmissible mechanically and continued efforts to associate viruses and viroids have so far been unsuccessful. Epidemiological observations suggested that the disease is airborne and probably caused by a mollicute. In order to test this hypothesis, plots were covered by an insect-proof net and with white nets providing 15, 30 and 50% shade. The 30%, 50% and insect-proof nettings provided complete protection, and the 15% netting reduced disease incidence to <2%, compared with>37% in the uncovered control plot. Spraying plants at weekly intervals with a commercial whitewash solution was also found to be effective in reducing disease incidence. The advantages of using a range of netting field treatments as a simple means for obtaining information on the epidemiological nature of a new disease are described.  相似文献   

建筑物的机械排烟     

曹顺学  王鹏翔  陈星  李双庆  于宏元  毕海源 《林业科技情报》2001,33(4):83-83

本文作者从实际经验出发,详细阐述了建筑物的机械排烟原理及设计施工,管理中的各项注意事项。  相似文献   

高压无气喷涂工艺在大型储罐上的应用     

杨占品  范传宝  鲍善彩 《油气储运》2006,25(6):52-54

分析了大型储罐传统防腐涂装方式的特点,指出了采用新型涂装方式的必要性,介绍了高压无气喷涂工艺的预处理、实施及注意事项,分析了高压无气喷涂工艺的实施效果,提出了储罐防腐的建议.  相似文献   

几种叶面肥料在小菊上的筛选与应用研究     

马燕  刘育俭 《农业科技与信息》2006,(12)

试验采用单因素随机区组设计,叶面喷施肥料的施肥方法,应用方差分析和多重比较分析试验数据,从而筛选出小菊最佳的营养元素配方。试验从不同叶面肥料在小菊上的筛选与应用研究的试验结果得到：小菊对肥料具有较强的选择性：三高灵的施用能够增加小菊的开花数量和鲜叶片叶绿素的含量；宝力丰的施用能提高小菊单株的干物重；OPAL的施用能延长小菊开花的花期。  相似文献   

棚菌灵烟剂的研究     

于久才  于振华 《东北农业大学学报》1994,25(3):229-233

筛选出适合配制烟剂的高效药剂,用低成本的供热剂,采用简便、安全的干制法配成复方棚菌灵烟剂,可防治温室、塑料大棚黄瓜、番茄的多种病害,具有高效、经济、低毒、对蔬菜污染小、便于推广应用等特点．  相似文献   

二化螟在茭白上的钻蛀行为及其防治方法   总被引：2，自引：1，他引：2  

俞晓平  郑许松  徐红星  陈建明  张珏锋 《植物保护学报》2004,31(1):26-32

研究了二化螟在茭白植株上的转移、钻蛀和产卵行为以及取食选择性,并根据其行为特性,制订合理的药剂喷施方法.结果表明,二化螟90%以上的卵产在茭白的叶片上,其余部分产在叶鞘上.产卵的主要叶位是心叶、倒一叶和倒二叶.超过50%的卵块集中在叶片距叶枕0～60cm的部位.幼虫孵化后,蚁螟蛀入的部位一般在叶枕以下的叶鞘内侧,多集中于倒四、倒五叶鞘.2龄后开始钻蛀内侧叶鞘,并蛀入茭白茎的内芯,二化螟幼虫在茭白植株上通常从叶片转移到叶鞘进行钻蛀危害.幼虫嗜食茭白茎部,其次为茭白果肉和叶鞘,对叶片几乎不取食.使用叶鞘喷施杀虫可达到对茭白进行全株喷雾同样的防治效果,并可节省40%～50%的用药量,经济和生态效益十分明显.  相似文献   

Effects of smoke,ash and heat shock on seed germination of seven species from Central Zagros rangelands in the semi-arid region of Iran     

Ali Asghar Naghipour  Seyed Jamaleddin Khajeddin  Pejman Tahmasebi  Majid Iravani 《African Journal of Range and Forage Science》2016,33(1):67-71

Fire products have been widely identified as germination cues for a number of species from both fire-prone and fire-free ecosystems. However, there is uncertainty about the effects of fire products on seed germination of semi-arid rangeland species. We examined the germination of seven dominant species from Central Zagros rangelands in the semi-arid region of Iran under various heat shock (60, 80 and 120 °C), aerosol smoke, ash and control treatments. Our findings showed that fire products could enhance, inhibit or not affect the seed germination of rangeland species in this area. The germination percentage of Astragalus adscendens increased following 60 °C heat treatment in comparison with the control. The germination of Astragalus verus, Bromus tectorum, B. tomentellus and Phlomis olivieri were increased significantly using smoke treatment (P<0.0001). The seed germination of B. tomentellus and B. tectorum was promoted by ash treatment, whereas the other species exhibited no response or were inhibited by fire products. In addition, smoke treatment shortened the overall germination time of B. tectorum. These findings suggest that fire products affect the germination of several species and can serve as potential tools for understanding the vegetation dynamics and restoration of disturbed semi-arid rangelands.  相似文献   

Evaluation of the pattern of spray released from a moving multicopter     

Illia Chyrva  Mark Jermy  Tara Strand  Brian Richardson 《Pest management science》2023,79(4):1483-1499

BACKGROUND

Multicopters are used for releasing particulates seeds, fertilizer and spray. Their low cost and high manoeuvrability make them attractive for spraying in steep terrain and areas where overspray is undesirable. This article describes a model of multicopter wake and its influence on particulate dispersion, which is computationally economical compared to many computational fluid dynamics (CFD) approaches, yet retains reasonable accuracy.

RESULTS

A model was successfully implemented in OpenFOAM . It features source terms for the rotor wash, Lagrangian particle tracking, an evaporation model, and a porous medium approach to model the effect of the ground vegetation. Predictions were validated against the field tests of Richardson et al. which used a DJI Agras MG-1 multicopter in three different flights with airspeeds of 3.2–4.9 m s⁻¹, ground speeds of 2.1–2.9 m s⁻¹ and cross-wind speeds of 0.04–2.2 m s⁻¹. The effective swath width (30% line separation) was predicted to within one standard deviation. Sensitivity to a rotor rotational speed, flight height, flight velocity, multicopter roll and yaw angles, surface roughness length, plant height and leaf density was checked.

CONCLUSION

In all flight trials, the modelled swath was closest to the experimentally obtained swath when the surface roughness of the fetch was equal to 0.5 m (bushes) and the rotational speed of all rotors was equal to 2475 rpm with 0.75R (0.2 m) tall plant canopy (grass) introduced to the model. The model showed acceptable validity for flight velocities of ≤2.8–5 m s⁻¹ when flight parameters can be approximately estimated. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.  相似文献   

METAL MATRIX PARTICULATE COMPOSITES BY SPRAYING CODEPOSITION     

Peng Xiaodong Qian Hancheng Zhang Xiaomei 《保鲜与加工》1992,(5):77-82

The spraying codeposition process is used to produce metal matrix paniculate composites, whose technical procedure and main processing parameters are analyzed. The microstructure of the composites is examined and the properties are tested. The solidification characteristics in the spraying deposition and solidification process are discussed. The results indicate that several problems involved in conventional methods can be overcome with this technique to preduce metal matrix paniculate composites. The reinforce particles are dispersed in the matrix homogeneously without solidification segregation. Compared with the matrix alloy,the composite proves to be harder and has excellent wear resistance.  相似文献   

荷电喷雾电晕电极诱导电场数值计算与分析     

陈志刚  杨超珍  孙英琨  储金宇 《排灌机械》2007,25(4):57-60

为深入研究电晕荷电喷雾产生电场的分布情况,针对电晕荷电喷雾中常用的多针组合式电极,采用电荷模拟法,运用matlab软件编程,对电极诱导电场进行数值计算,得出了电场中任意点的电势、场强值及其分布图。通过计算分析发现,电晕放电产生的静电场是极不均匀的;场强由电极结构参数-极径、电极尖端曲率半径、电极电压、针状电极的个数以及电极环中心距地面的垂直高度决定;雾滴从喷嘴到靶标的输运过程中,电晕电极产生的电场仅在输运初始阶段对雾滴的运动起主导作用。  相似文献