The effect of some Frescon analogs on the aquatic snail,Lymnaea stagnalis: II. Correlation of neurotoxicity to Molluscicidal effectiveness     

B.L. Brezden  D.R. Gardner 《Pesticide biochemistry and physiology》1980,13(2):178-188

Although the molluscicide Frescon is a strong neurotoxin to the Lymnaea stagnalis central nervous system in vitro, it is probable that the exposure of the whole animal to this molluscicide fails to result in central nervous system abnormalities: Frescon does not appear to reach the brain in sufficient quantity to disrupt its normal activity. However, only those Frescon analogs found to be neurotoxic were molluscicidal, suggesting some related mode, if not site, of action. Frescon and its analogs may act by affecting excitable tissues other than the nervous system (e.g., the snail musculature) by altering certain functional and/or structural membrane properties.  相似文献   

Growth and development of Cirsium arvense in relation to herbicide dose,timing of herbicide application and crop presence     

Varwi Jacob Tavaziva  Theo Verwijst 《Acta Agriculturae Scandinavica, Section B - Plant Soil Science》2019,69(3):189-198

The aim of this study is to assess control effects of 2-methyl-4-chlorophenoxyacetic acid (MCPA) dosage, application timing and crop presence on the weed Cirsium arvense. Swedish farmers are recommended to control C. arvense chemically when most shoots are 10-20 cm tall, and mechanically at the compensation point (CP). Recent studies have shown that the CP occurs before shoots reach the three-leaf stage. We hypothesised that (i) herbicide application near the three-leaf stage gives the strongest control, (ii) crop presence increases herbicide effects, and (iii) a 50% herbicide dose gives the same effect as 100%. Treatments of the pot experiment consisted of MCPA 750; 0%, 50% and 100% of the recommended dose applied at leaf stages 3-8, with and without barley. The strongest control was obtained at four leaves and a maximum shoot height of 13 cm, using the recommended dose and with spring barley. In a field population, a maximum shoot height of 13 cm corresponded to a medium height of 6 cm. The 50% dose gave poorer control. Spraying with the recommended dose at the four-leaf stage reduced the development of C. arvense most effectively. Based on this, we recommend that herbicide spraying should be performed at earlier leaf stages/median heights than previously recommended.  相似文献   

A rapid extensigraph protocol for measuring dough viscoelasticity and mixing requirement     

《Journal of Cereal Science》2017

The extensigraph is particularly useful in characterizing dough viscoelastic properties; however, testing throughput for standard method is low due to the prerequisite for farinograph water absorption, long dough resting and milling to prepare large amounts of flour. Therefore, a rapid extensigraph method was developed that reduced sample size (165 g wheat) for milling and more than tripled throughput. Wheat is milled in Quadrumat Junior mill with a modified sieving system. The resulting flour (100 g) was mixed with a pin mixer at constant water absorption to allow the evaluation of wheat genotypes at the absorption level they are expected to perform. Dough was subsequently stretched by an extensigraph after 15 min of floor time and 30 min resting. Strong correlations for extensigram R_max (r > 0.93), extensibility (r > 0.64) and area (r > 0.88) were found for the proposed method compared to the standard method. Mixing parameters (time and energy) obtained during dough preparation provided further information about dough strength and mixing requirement. By significantly reducing sample size requirement and increasing testing throughput, this rapid extensigraph method can be widely adopted in milling and baking industry and meets the need for a fast evaluation of dough strength in breeding trials.  相似文献   

A new lean no time test baking method with improved discriminating power     

《Journal of Cereal Science》2017

In response to customer concerns related to gluten strength in commercial baking, the Canadian Grain Commission assessed whether the Canadian Short Process (CSP) test bake method was generating useful data related to intrinsic strength of wheat varieties. Assessment of CSP loaf volume data for Canadian variety trials spanning 2003 to 2013 showed very little correlation with dough strength parameters as measured by farinograph and extensigraph. A lean no time (LNT) test baking method was developed that can better discriminate genotypes and provide objective indicators of the effect of intrinsic dough strength on baking quality. From early method development, through method validation and verification using diverse sets of samples targeting different Canadian wheat classes and grown in three different crop years, results showed the LNT method to be more discriminating and easily adopted by other laboratories. In 2015, the LNT method was adopted as the method of choice in future Canadian variety registration trials. The LNT method is fast, simple and well-suited to high throughput test baking conditions encountered in the evaluation of large numbers of breeder lines. A new objective parameter, loaf top ratio, was also introduced and found to correlate well with dough strength and dough handling properties.  相似文献   

Kernel vitreousness and protein content: Relationship,interaction and synergistic effects on durum wheat quality     

《Journal of Cereal Science》2017

Four sets of durum samples were used in this study to further understand the interrelationships among hard vitreous kernels (HVK), protein content, and pigment concentration, with a focus on the interaction and synergistic effects of protein content and vitreousness on durum quality. HVK level increases with higher protein content in the range of 9.5–12.5%, but this relationship is less evident in durum samples with high protein content (12.5–14.5%). Both protein content and kernel vitreousness can significantly affect durum milling quality. White starchy kernels (WSK) in low protein durum have a very detrimental impact on milling and pasta processing quality, but high protein content can mitigate the adverse impact of WSK on durum quality. Although protein content plays a dominant role, higher HVK might contribute positively to pasta firmness. There was no significant difference in yellow pigment content between HVK and WSK. However, pigment loss from semolina to dough was higher for WSK than HVK. Despite the difference in protein content, HVK and WSK have little difference in gluten strength. The monomeric protein was preferentially accumulated in HVK. The glutenin proteins of HVK and WSK were similar in the ratios of 1Bx/1By and HMW/LMW-GS.  相似文献   

A chromosome‐scale draft sequence of the Canada fleabane genome     

Martin Laforest  Sara L Martin  Katherine Bisaillon  Brahim Soufiane  Sydney Meloche  Eric Page 《Pest management science》2020,76(6):2158-2169

  相似文献   

中欧山松大小蠹的生物学特性及在加拿大BC省的发生状况     

蔡卫东  张季  季梅 《西部林业科学》2005,34(3):83-85

从分布及寄主,形态特征及生活史,为害特性对中欧山松大小蠹的生物学特性作了介绍。继后对此虫害在加拿大BC省为害的现状及该国目前对中欧山松大小蠹的研究进行了论述。  相似文献   

不同产地西洋参氨基酸种类及含量分析     

赵方杰  廉喜红  胡小平  苏景文  王启明  赵平  范三红  商文静 《西北农业学报》2020,30(7):1051-1058

为研究不同种植区西洋参氨基酸的含量和品质,按食品安全国家标准GB/T5009.124-2016,对加拿大多伦多市、陕西省留坝县、吉林省抚松县、山东省文登市来源的4 a生西洋参进行氨基酸种类和含量测定及对比分析。各产地西洋参均检测出17种氨基酸,其中含有人体必需的赖氨酸、蛋氨酸、异亮氨酸、苯丙氨酸、亮氨酸、苏氨酸、缬氨酸和半必需氨基酸精氨酸;含有蛋氨酸、亮氨酸、异亮氨酸、苯丙氨酸、赖氨酸、天冬氨酸、甘氨酸、谷氨酸和精氨酸等8种药用氨基酸。人体必需氨基酸及药用氨基酸含量对比分析结果表明,加拿大多伦多市来源西洋参的这两类氨基酸含量最高,分别为46.20 mg/g 和61.93 mg/g,占总氨基酸含量的 54.0%和72.3%,其次是陕西省留坝县来源的西洋参,分别为45.70 mg/g和61.63 mg/g,占总氨基酸含量的51.9%和70.0%。主成分分析及综合评价结果表明,从氨基酸含量及营养均衡性角度来看,陕西省留坝县西洋参是最接近原产地加拿大的西洋参。  相似文献   

施氮与株丛切割对退化新麦草草地的改良效果   总被引：11，自引：0，他引：11  

戎郁萍  韩建国 《草地学报》1999,7(2):157-164

本文研究了施氮肥和株丛切割对退化新麦草人草地生产性能的影响，结果表明，施氮肥和株丛切割提高了新麦草草地生产性能和生产力。此外，施氮肥可改善牧草品质及土壤牮氮能力。株丛切割和施氮肥（１２０ｋｇ／ｈｍ＾２）相结合与单施氮肥相比，成本较低，对退化新麦草草地的改良效果良好，年均产草量２６７９．５ｋｇＤＭ／ｈｍ＾２。  相似文献   

Testing assumptions of cost surface analysis—a tool for invasive species management   总被引：1，自引：0，他引：1  

Emily K. Gonzales  Sarah E. Gergel 《Landscape Ecology》2007,22(8):1155-1168

Applied ecology could benefit from new tools that identify potential movement pathways of invasive species, particularly where data are sparse. Cost surface analysis (CSA) estimates the permeability (friction) across a landscape and can be applied to dispersal modelling. Increasingly used in a diversity of applications, several fundamental assumptions that might influence the outputs of CSA (cost surfaces and least-cost pathways) have yet to be systematically examined. Thus, we explore two issues: the presumed relationship between habitat preferences and dispersal behaviour as well as the degree of landscape fragmentation through which an organism moves by modelling a total of 18 sensitivity and dispersal scenarios. We explored the effect of fragmentation by altering the friction values (generally assigned using expert opinion) associated with patch and linear features. We compared these sensitivity scenarios in two sites that differed in fragmentation. We also used eastern grey squirrels (Sciurus carolinensis) as an example invading species and compared diffusion models and two contrasting cost surface dispersal scenarios. The diffusion model underestimated spread because squirrels did not move randomly through the landscape. Despite contrasting assumptions regarding dispersal behaviour, the two cost surfaces were strikingly similar while the least-cost paths differed. Furthermore, while the cost surfaces were insensitive to changes in friction values for linear features, they were sensitive to assumptions made for patch features. Our results suggest that movement in fragmented landscapes may be more sensitive to assumptions regarding friction values than contiguous landscapes. Thus, the reliability of CSA may depend not only on the range of friction values used for patches but also the degree of contiguity in the landscape.  相似文献