外源氮添加对湿地土壤N_2O排放量的影响     

史昊先  高晓霞  于景丽  赵吉 《农业环境与发展》2014,(5)

为搞清湿地土壤驱动N2O排放的关键氮源类型,有效减少湿地N2O的排放,本文通过室内控制温湿度,用气相色谱法分析不同外源氮素对湿地N2O排放的影响。结果表明:外加氮源组总是高于对照组N2O排放量(4.4 mg·m-3)。在设定的剂量范围内,单独添加尿素或尿素与硝酸铵1∶1配合时N2O排放量呈现先增后减的单峰分布趋势,峰值分别为10.6 mg·m-3和229.0 mg·m-3;单独添加硝酸铵时N2O排放量(32.6~111.0 mg·m-3)随着氮素添加量增加呈现持续上升趋势。单独添加尿素或硝酸铵、尿素与硝酸铵1∶1配合均促进N2O的排放,但硝酸铵尿素混合添加对N2O排放量的贡献单独添加硝酸铵单独添加尿素。这为预测内蒙古高原区农牧交错带湿地氮素输入可能带来的温室效应和有效减排提供科学依据。  相似文献   

Decreasing of methanogenic activity in paddy fields via lowering ponding water temperature: A modeling investigation     

《Soil biology & biochemistry》2014

Methane (CH₄) is a potent greenhouse gas and the huge CH₄ fluxes emitted from paddy fields can prejudice the eco-compatibility of rice cultivation. CH₄ production in submerged rice crops is known to be highly influenced by water temperature. Hence, lowering ponding water temperature (LPWT) could be an option to mitigate CH₄ emissions from paddy environments when it is possible either to irrigate with slightly colder water or to increase ponding water depth. However, paddy soil is a complex environment in which many processes are simultaneously influenced by temperature, leading to a difficult prediction of LPWT effects. For this reason, LPWT efficiency is here theoretically investigated with a one-dimensional process-based model that simulates the vertical and temporal dynamics of water temperature in soil and the fate of chemical compounds that influence CH₄ emissions. The model is validated with literature measured data of CH₄ emissions from a paddy field under time-variable temperature regime. Based on modeling results, LPWT appears promising since the simulated reduction of CH₄ emissions reaches about −12% and −49% for an LPWT equal to −5 °C during the ripening stage only (last 30 days of growing season, when rice is less sensitive to temperature variations) and −2 °C over the whole growing season, respectively. LPWT affects CH₄ emissions either directly (decreasing methanogenic activity), indirectly (decreasing activity of bacteria using alternative electron acceptors), or both. The encouraging results provide the theoretical ground for further laboratory and field studies aimed to investigate the LPWT feasibility in paddy environments.  相似文献   

区域工业发展与碳排放的脱钩关系分析——基于2006~2013年湖南的实际情况     

熊曦 《湖南农业大学学报(自然科学版)》2015,(6):120-125

根据湖南省“十一五”以来（2006~2013年）的工业发展和碳排放情况，分析湖南工业发展与碳排放之间的脱钩弹性、节能弹性、减排弹性，结果表明：湖南工业行业发展的过程中，较好地控制了碳排放量，但节能减排任务依然较大。因此，新常态下应以“节能、减排”为主线，深入优化产业结构，调整能源消费结构，从而确保工业可持续发展的同时，实现碳排放的合理控制。  相似文献   

Isolating the effect of soil properties on agricultural soil greenhouse gas emissions under controlled conditions     

Gemma A. Miller  Robert M. Rees  Bryan S. Griffiths  Joanna M. Cloy 《Soil Use and Management》2020,36(2):285-298

Agricultural soils are important sources of greenhouse gases (GHGs). Soil properties and environmental factors have complex interactions which influence the dynamics of these GHG fluxes. Four arable and five grassland soils which represent the range of soil textures and climatic conditions of the main agricultural areas in the UK were incubated at two different moisture contents (50 or 80% water holding capacity) and with or without inorganic fertiliser application (70 kg N ha⁻¹ ammonium nitrate) over 22 days. Emissions of N₂O, CO₂ and CH₄ were measured twice per week by headspace gas sampling, and cumulative fluxes were calculated. Multiple regression modelling was carried out to determine which factors (soil mineral N, organic carbon and total nitrogen contents, C:N ratios, clay contents and pH) that best explained the variation in GHG fluxes. Clay, mineral N and soil C contents were found to be the most important explanatory variables controlling GHG fluxes in this study. However, none of the measured variables explained a significant amount of variation in CO₂ fluxes from the arable soils. The results were generally consistent with previously published work. However, N₂O emissions from the two Scottish soils were substantially more sensitive to inorganic N fertiliser application at 80% water holding capacity than the other soils, with the N₂O emissions being up to 107 times higher than the other studied soils.  相似文献   

Effects of cover crop growth and decomposition on the distribution of aggregate size fractions and soil microbial carbon dynamics          下载免费PDF全文

D. Linsler  M. Kaiser  R. Andruschkewitsch  C. Piegholdt  B. Ludwig 《Soil Use and Management》2016,32(2):192-199

Although the effects of cover crops (CC) on various soil parameters have been fully investigated, less is known about the impacts at different stages in CC cultivation. The objective of this study was to quantify the influence of CC cultivation stages and residue placement on aggregates and microbial carbon (C_mic). Additionally, the influence of residue location and crop species on CO₂ emissions and leached mineralized nitrogen (N_min) during the plant degradation period was also investigated. Within an incubation experiment, four CC species were sown in soil columns, with additional columns being kept plant‐free. After plant growth, the columns were frozen (as occurs in winter under field conditions) and then incubated with the plant material either incorporated or surface‐applied. With CC, concentrations of large and medium macroaggregates were twice that of the fallow, confirming positive effects of root growth. Freezing led to a decrease in these aggregate size classes. In the subsequent incubation, the large macroaggregates decreased far more in the samples with CC than in the fallow, leading to similar aggregate size distributions. No difference in C_mic concentration was found among the CC cultivation stages. CO₂ emissions were roughly equivalent to the carbon amounts added as plant residues. Comparison of columns with incorporated or surface‐applied residues indicated no consistent pattern of aggregate distribution, CO₂ emission or C_mic and N_min concentrations. Our results suggest that positive effects of CC cultivation are only short term and that a large amount of organic material in the soil could have a greater influence than CC cultivation.  相似文献   

Comparison of emission estimates for non‐CO2 greenhouse gases from livestock and poultry in Korea from 1990 to 2010          下载免费PDF全文

Chunhyun Paik  Yongjoo Chung  Hugon Kim  Young Jin Kim 《Animal Science Journal》2016,87(4):612-623

It has often been claimed that non‐carbon dioxide greenhouse gases (NCGGs), such as methane, nitrous oxide and fluorinated greenhouse gases, are significant contributors to climate change. Here we nvestigate emission estimates of methane and nitrous oxide from livestock and poultry production, which is recognized as a major source of those NCGGs, in Korea over the period of 1990 through 2010. Based on the data on livestock and poultry populations, emission estimates of methane and nitrous oxide are first derived based on the Tier 1 approach. Then, the Tier 2 approach is adopted to obtain emission estimates of methane and nitrous oxide from cattle, which are known to be the largest sources of these NCGGs and account for about 70% of emissions from livestock and poultry in Korea. The result indicates that the Tier 2 estimates of methane and nitrous oxide emissions from enteric fermentation and manure management are significantly different from the Tier 1 estimates over the analysis period.  相似文献   

基于C8051F单片机的发动机转速测量   总被引：2，自引：0，他引：2  

曲金玉  任桂周  侯树展  刘大权 《拖拉机与农用运输车》2007,34(6):66-67

介绍了一种基于C8051F单片机的发动机转速实时测量方法,给出了测量系统的实现技术和硬件结构,并进行了软件设计及实验。该方法在实际测量中取得了良好的效果,为发动机动力性能研究提供了重要的参考依据。  相似文献   

稀薄燃烧空燃比控制技术     

刘建霞  姚美红  符丽君 《拖拉机与农用运输车》2007,34(5):30-31

为解决能源和环境两大难题,使发动机工作在稀薄燃烧区,而稀薄燃烧技术的关键是发动机空燃比的控制;采用先进的计算机控制技术使发动机在最佳稀薄空燃比下工作,有效改善发动机动力性、燃油经济性、降低尾气污染。  相似文献   

用于内燃机数据采集与处理的虚拟仪器技术开发     

倪培永  孟昭昕 《拖拉机与农用运输车》2005,(3):60-62

基于虚拟仪器技术,以数据采集卡及计算机为主要硬件平台,利用图形化编程语言LabVIEW编程,设计出内燃机数据采集与处理系统。研究结果表明该系统运行可靠,人机界面友好,操作使用方便,且便于用户扩展功能,实现了较高的性价比。该系统的开发成功对于加快内燃机试验进程以及深入开展科学研究具有重要意义。  相似文献   

车辆发动机气门弹簧的设计方法探讨     

张俊海  郑兰霞  陈艳艳  葛玉萍 《拖拉机与农用运输车》2007,34(5):34-35

发动机气门弹簧多用圆柱形螺旋压缩弹簧,在气门关闭过程中用于克服气门及传动件的惯性力,保证气门及时落座并紧密贴合,防止气门在发动机振动时产生跳动。本文通过分析其优化设计的设计变量、目标函数和约束条件,提出并验证优化设计的数学模型,该方法简便易行,且可以达到预期的设计目的。  相似文献