Evaluation of two N cycle models for the prediction of N mineralization from grassland soils in the UK     

A. Bhogal  A. Bhogal  M.A. Shepherd  D.J. Hatch  L. Brown  S.C. Jarvis 《Soil Use and Management》2001,17(3):163-172

Abstract. The ability of two nitrogen cycle models, of contrasting complexity, to predict N mineralization from a range of grassland soils in the UK, was evaluated. These were NCYCLE, a simple mass balance model of the N cycle in UK grasslands, and CENTURY, a more complex model simulating long-term C, N, P & S dynamics in grassland ecosystems. The models were tested using field measurements of net N mineralization from a range of grassland soils (differing in soil type, history & management practice), obtained over a 2 year period using a soil core incubation technique. This method was considered to measure the total net release of mineral N from the soil organic matter over a specified time, including N which may have been recycled several times. NCYCLE consistently under-estimated mineralization rates at all sites. By contrast, there was some correlation between CENTURY predictions of net N mineralization and field measurements. This may have reflected the different abilities of the two models to simulate N recycling. Neither model, however, was able to predict adequately the effect of cultivation and reseeding on net N mineralization.  相似文献   

波尔山羊胚胎数量、质量与受体移植妊娠率的关系   总被引：4，自引：0，他引：4  

张红  李键  马保华  邓小东  王波 《四川畜牧兽医》2001,28(11):25-25,27

本文就波尔山羊胚胎数量，质量与受体移植妊娠率的关系进行了探讨。结果表明：胚胎质量优劣是直接影响胚胎移植成功率的关键因素。移植胚胎数量因品种不同有差异。移植双胚，奶山羊受体胚胎成羔率53．4％，明显高于成都麻羊胚胎成羔率36．3％，成都麻羊单胚成羔率为66．7％。  相似文献   

水平连续铸钢凝固过程数值模拟     

刘金水  蒋冰 《湖南农业大学学报(自然科学版)》1995,22(3)

本文在分析水平连铸传热特征的基础上，给出了一维情况下，计算结晶器出口处铸坯凝固层厚度的解析式，建立了计及轴向传热的连续坯凝固模拟模型。进行了连续坯二维传热的凝固数值模拟，其模拟结果与实验结果吻合较好，具有普遍应用价值。  相似文献   

不同氮源对红檬实生苗菌根依赖性的影响     

赖毅  黄勤 《中国南方果树》1994,(4)

将红檬实生苗培养于改良无土基质中，接种泡囊－丛枝菌根Ｇｌｏｍｕｓｃｉｔｒｏｃｏｌｕｍ，以不接种菌根为对照，并分别施用含氮量相等的３种氮肥，即硝酸按（ＮＯ３－Ｎ）、尿素（ＮＨ２－Ｎ）和硫酸铵（ＮＨ４－Ｎ）。接种菌根１６周后，施不同氮肥的红檬实生苗均有效地感染了菌根，并促进了植株的生长。试验证明，红实生苗施硝态氮（ＮＯ３－Ｎ）使植株的菌根依赖性有明显提高。  相似文献   

金属热防护系统多层隔热材料的传热分析及参数优化     

闫长海  曲寿江  孟松鹤  陈贵清  杜善义  刘国仟 《勤云标准版测试》2006,(4):257-263

采用能量平衡方程和离散坐标法近似地建立了金属热防护系统多层隔热材料的一维稳态传热的数学模型，并利用遗传算法和纤维隔热材料的有效导热系数试验数据求解传热反问题，从而得到了模型中的纤维隔热材料的辐射衰减系数、反照率和隔热屏表面辐射发射系数。最后，由实验测得了多层隔热材料的有效导热系数，验证了采用优化参数后，多层隔热材料的传热模型的正确性。  相似文献   

影响体细胞核移植效率的因素   总被引：2，自引：0，他引：2  

刘亚  章孝荣 《动物医学进展》2003,24(6):35-38

哺乳动物体细胞核移植 (克隆 )是近年来迅速发展起来的一项新技术 ,对濒危动物保护、优良种畜快速扩群以及核质关系的研究、药物试验等诸多领域都具有重大意义。但体细胞核移植是一项程序繁杂的工作 ,每一步操作所采用的试剂、材料和方案等都会影响到核移植效率 ,因而其影响因素十分众多。文章根据目前已有资料 ,论述了卵母细胞来源、卵母细胞与供体细胞的胞质容量、卵母细胞的去核方案、体细胞供体动物的年龄、供体细胞的组织来源与传代次数及供体细胞的冷藏、冷冻和所处的细胞周期阶段对核移植效率的影响。另外 ,对重组胚的融合 -激活方案、核移植方案及重构胚的培养方案对核移植效率的影响也作了简要论述。  相似文献   

直接利用传递函数对分叉结构进行模态综合   总被引：1，自引：0，他引：1  

白英  陈渠昌 《农机化研究》2005,(1):97-99

建立了一种直接利用传递函数对分叉结构进行模态综合的方法。传统的方法一般都需要对大矩阵进行求逆运算,而此方法只涉及分叉结构结合部的传递函数矩阵的求逆,因此求逆计算量很小,特别是当直接采用传递函数的测量值进行模态综合时,就更体现出它的优越性。  相似文献   

Nuclear transfer in loach (Paramisgurnus dabryanus Sauvage) by cell-to-cell electrofusion     

F Hongtuo  & W Chingjiang  . 《Aquaculture Research》2001,32(4):267-275

To study nuclear transfer in the loach (Paramisgurnus dabryanus Sauvage), blastula and gastrula cells were fused with UV-inactivated oocytes by cell-to-cell electrofusion. To facilitate nuclear transfer, blastula and gastrula cells were cultured or incubated at 4 °C in different solutions. TC-199 medium supplemented with 20% calf serum was the best culture solution, and effectively retained the totipotence of blastula or gastrula cells for up to 10 days. It was found that gastrula cells incubated at 4 °C had the same totipotence as blastula cells. The optimal UV dosage for inactivation of the oocyte chromatin was 180–240 mJ cm⁻². Electrofusion was carried out in a cone-shaped fusion chamber, which permitted the recipient oocyte and the donor blastula cell to contact one another. The electrofusion procedure resulted in a 10% success rate of normal-appearing fish. Genetic analysis indicated that the nuclear material originated from the donor cell (blastomere) and the oocyte pronucleus did not take part in development.  相似文献   

纤维板表面粉末涂料的涂饰工艺     

门全胜  张文标  李文珠  范增霞 《浙江林学院学报》2004,21(4):437-441

研究一种在纤维板表面进行粉末涂装再转移印花的新工艺.结果表明:纤维板粉末涂装基材预处理采用预热干燥,表面砂光,控制含水率为6%～8%;喷涂上粉量为333.33～388.89 g·m-2;固化条件为180 ℃,15～25 min.采用干燥箱中热转移方式,转移印花温度为(160±10)℃,时间15～20 min.按GB/T 4893-85和GB/T1733-79测试涂膜性能,涂膜附着力等级为2级,耐磨性等级为1级,耐水性合格,耐液性等级为1级.图1表4参9  相似文献   

Nitrogen uptake by ryegrass from organic wastes applied to a sandy loam soil     

C. M. D. S. Cordovil    F. Cabral    J. Coutinho  & M. J. Goss 《Soil Use and Management》2006,22(3):320-322

Sandy‐textured Mediterranean soils are invariably depleted in organic matter and supply only small amounts of N to crops. To compensate for these deficiencies, we tested the N supply from six organic wastes applied to a Cambic Arenosol in pots growing ryegrass. The results showed that the behaviour of the wastes in supplying N to a ryegrass crop grown in this soil can be predicted by observing their performance in laboratory aerobic incubations. The N made available during these incubations fitted well to a one‐pool kinetic model.  相似文献