5种生物制剂对马铃薯种薯萌芽、极端天气下植株生长和产量性状的影响   总被引：1，自引：1，他引：0  

淳俊  桑有顺  冯焱  陈涛  李倩 《中国农学通报》2021,37(29):1-6

旨在满足马铃薯生产中茬口衔接、机械化生产技术应用、不利气候下稳产等对马铃薯出苗早、齐、壮的需求,以‘费乌瑞它’为供试品种,用基于有益活菌或工程菌提取物的5种生物制剂进行种薯处理,对多重性状进行了对比分析。5种生物制剂较常规化学制剂,均能够不同程度地促进种薯萌芽和芽根同生,出苗期提前2~7天,播种后49天的出苗率提高3.33%~17.78%。其中,表现最好的为酵母核苷酸衍生物和VDAL,种薯萌发和生根均显著高于对照。霜冻后,生物剂拌种处理在恢复前期促进植株生长,由此促进恢复后期的块茎发育,较常规化学处理增产8.39%~24.03%,体现了不同程度的保产效果。多马道黑、酵母核苷酸衍生物、根肽和VDAL体现出较好的保产效果,可作为种薯处理剂投入马铃薯生产。  相似文献   

中层拖网的水层控制   总被引：2，自引：0，他引：2  

王尔光 《大连水产学院学报》1991,6(2):21-29

  相似文献   

大豆疫病的种子处理技术研究   总被引：2，自引：0，他引：2  

严进  周肇蕙 《植物检疫》1997,11(1):1-4

本试验用不同浓度的瑞毒锰锌、杀毒矾和克露进行大豆种子处理试验，结果表明，５００ｐｐｍ瑞毒锰锌对大豆疫病具有很好的治疗作用，而用杀毒矾以种子重量０．４—０．５％的剂量闷种，能显著地抑制大豆疫霉菌的侵入  相似文献   

几种综合施肥措施对早熟温州蜜柑生长和产量的影响     

农奇仁  李生雷 《热带农业科学》2017,(4):18-21

对广西国有良丰农场十二年生早熟温州蜜柑采用几种施肥方法,比较不同施肥措施下,该地区早熟温州蜜柑各个物候期的生长发育情况和果实产量。结果表明:处理4分别在各个物候期前进行5次合理的氮、磷、钾配方施肥,明显影响果树的生长发育情况,果实成熟期相对提前;平均单果重量增加,达到125 g/个;平均单株产量明显增加,达到93.60 kg/株;平均产量最高,为73.94 t/hm~2。因此,针对该地区独特的地理气候环境,适合于该地区的合理施肥方式对于提高果树产量和增加经济收入显得尤为重要。  相似文献   

Analysis of Radial Forces on the Seal Block in a Compound Gear Pump with 3 Idle Gears     

ZHAO Lian chun  XU Xian liang  SUN Chang jing 《保鲜与加工》2001,(6):45-47

By analyzing the pressure distribution between gears and sealing blocks in compound gear pump with three idlers,the resultant hydraulic forces acting on seal blocks are obtained.The conclusion is the unbalanced resultant hydraulic forces are relatively small in magnitude.In the pump,the inner sealing edges are long and so it s Sealing effect is good,but the outer sealing effect is relatively poor because of its short sealing edges.The little unbalanced force pushes the sealing block to te pumping chamber,therefore it is advantageous to meliorating the pump's sealing effect,thereby to improving it's volumetric efficiency as well.  相似文献   

Reference Efficiency of Planetary Gear Train     

CUI Li  QIN Da-tong  SHI Wan-kai 《保鲜与加工》2006,(3):11

Reference efficiency of a pair of gear drive without planetary motion is the base to calculate efficiency of the whole planetary gear train. The authors find reference efficiency for speed increase is higher than that of the same drive used for speed reduction. This is different from the earlier viewpoint. New equations are derived for correctly calculating the reference efficiency of spur gear and helical gear with internal conjugate and external conjugate either in the state of speed increase or speed reduction respectively. The equations are also used to calculate efficiency of 2K-H planetary gear train.  相似文献   

Intensity Comparative Analysis Based on Ideas Between Involute Gear and Double Involute Gear     

ZHANG Guang-hui  TAO Ling-feng  LIU Wen 《保鲜与加工》2005,(11):1-4

Modeler and simulation modules in Ideas software are used to build the finite element models on involute gear and double involute gear with accurate tooth shape, and with the same design parameters and under the same loads, finite element contact analysis has been done. At last, the contact stress and bending stress on the two types gear transmission at the different meshing positions are solved out, and comparative analysis and study have been done. At the same time, that the ladder-shape tooth on the double involute gear how to influence contact stress and bending stress is emphatically analysed. All above offer the theoretical foundation that bring the double involute gear with ladder-shape tooth into the industry.  相似文献   

Vibration & Noise Analysis on Double-ring Gear Reducer   总被引：1，自引：0，他引：1  

XIE Yong-chun  WANG Li-hu  LIU Wen  LIU Jing-hao  Chongqing  Chin 《保鲜与加工》2004,(4):20-23

Double-ring gear reducer with Central inputting shaft is studied. The basic structure of reducer as well as testing equipment, probe spot and testing method of Structure-borne noise and air-borne noise is presented. Based on frequency spectrum of each point, amplitude spectrum of structure-borne noise and testing results of air-borne noise, the authors analyze the vibration characters and latent faults of double-ring gear reducer, coming to the value and the cause of the noise, providing theoretical basis for proper design of the double-ring gear reducer and method of reducing its vibration and noise.  相似文献   

EDM Generating Technology of Quenched Internal Gear     

Liu Yuwen Liang Xichang 《保鲜与加工》1993,(1):64-66

Based on the infroduction of the present process of quenched internal gear, a new technolgy of machining quenched internal gear-EDM generating technology is presented with its principle and machining processes. .  相似文献   

THEORETICAL INVESTIGATION AND PARAMETER OPTIMIZATION ON ROLLING CONE ENVELOPING HOURGLASS WORM GEARING     

Wang Jinge Zhang Ganghui 《保鲜与加工》1992,(2):58-64

In this paper, a new high - strength worm gearing, named'rolling cone enveloping hourglass worm gearing' is proposed. With such a new type of worm gearing, the motion form between meshing tooth surfaces is changed in nature. A systematic theoretical study. a lot of numerical calculations and parameter analyses have been done. Based on these analyses,the optimum design of worm gearing is obtained. It is shown that this worm gearing possesses the virtues of high efficiency, large load capacity, long life -span and easy meanufacture.  相似文献