One-cycle Technique Based Adjustable Ac Source     

HUI Ya-qian  WANG Ming-yu 《保鲜与加工》2005,(9):31-34

By using one-cycle control theory, a novel voltage source inverter is proposed. The conventional one-cycle control technique needs that the integrator is reset instantaneously. But it is very difficult to realize with hardware due to the finite time constant of the reset circuitry. Therefore, based on the one-cycle technique, the paper gives a new control scheme to resolve the problem with dual switched integrator, and the performance of the integrators is close to ideal. The paper also uses the dc offset to implement the voltage measurement. Furthermore, the amplitude and frequency of the output voltage are effectively adjustable. The one-cycle control technique not only provides fast dynamic response, but also can admirably suppress the perturbation yielded by dc source and abate the undesired harmonic contents. Simulation studies were performed to prove the proposed scheme. The results show that the one-cycle control based voltage source inverter makes good use of dc source that is 92.8% and THD is only O. 255 9%.  相似文献   

A PRACTICAL PWM CONTROL METHOD OF CURRENT SOURCE GTR INVERTER     

Wang Xueqin Su Yugang 《保鲜与加工》1992,(1):100-107

According to the principle that the orbit of stator current vector in complerplane should be as close to a circle as possible, the PWM control pattern is derived and determined. The control method is realized by using a micro-computer.  相似文献   

基于CAN总线的供电系统三相并联逆变器同步控制方法     

王江波  杨仁刚  高春凤 《农业工程学报》2013,29(12):179-186

针对三相并联逆变器系统同步控制中CAN（controller area network）总线通信方式存在实时性和准确性随总线负载上升而下降和同步相位调节算法存在谐波频率偏移、波形畸变大等问题,该文提出了一种基于 CAN总线通信的基准时间同步方法和基于PWM（pulse width modulation）载波周期的相位同步调整算法,采用动态主从同步控制模式,所有逆变器单元依次作为主控单元,按照时间触发和事件触发相结合的方式实时发出包含频率信息的广播同步信号,所有逆变模块据此确定基准时间并调整输出电压的频率和相位使得同相的逆变器输出电压同频率、同相位,而不同相的逆变器输出电压相位互差120°。仿真分析和试验结果表明,该方法使三相并联逆变器系统输出电压各相之间的相位误差和同相之间相位差均在1°之内,可以在无需增加功率器件耐压值和限流值的前提下提高供电系统供电容量。  相似文献   

A Control Algorithm to Regulate the Active and Reactive Power and Simulation Research of Dual-frequency Dual-Buck Inverter     

WANG Juan  ZHOU Luo-wei  DU Xiong 《保鲜与加工》2006,(12):45

This paper deduceS the control algorithm ,which can both regulate the active and reactive power of the novel dual-frequency dual-Buck inverter, and the control function. The control function based on one cycle control can control the AC-side active and reactive power by simple circuit. The simulation is given and the results prove the validity of the theory analysis. This inverter is valuable for the research of grid-connected inverters.  相似文献   

The power-supply of X-ray machine adopting PID control and high-frequency inverter technology     

ZHANG Si-jie  ZHAO Xiao-yu  ZENG Xiao-ping  PENG Cheng-ling  GUO Xing-ming  SHI Ling 《保鲜与加工》2011,(5):130-134

To solve the problem of low control accuracy and low stability of current X-ray machines, a kind of digital power supply for X-ray machine is introduced. In the digital power supply, some key technologies are used to improve the output stability of the high frequency inverter, including improved BUCK circuit for voltage regulating circuit, high frequency inverter and soft switching technology for the high-voltage generator. The PWM control technology is used to control the switch transistor of voltage regulating circuit and inverter circuit, which makes the drive waveform output stable and easy to control. In order to improve the control accuracy, reduce the volume and change high voltage consecutively, the software PID of the microcomputer is used to control the feedback circuit. The high-accuracy power chip is used for the filament power supply to make the filament electric current stable. Through the analysis of the circuit, the parameters of the circuit are calculated and the circuit is simulated by PSPICE software. The results show that the theoretical analysis is consistent with the practical simulation results. The design can meet the requirement of the technology indices of the power supply of the X-ray machines.  相似文献   

串并联谐振晶闸管中频电源的负载充磁启动方法研究     

孟志强  何勇志  彭永进 《湖南农业大学学报(自然科学版)》2003,30(2)

提出与研究了具有串并联谐振负载的晶闸管中频电源的一种新启动方法——负载充磁启动。该方法利用简单的辅助充磁电路，在启动时使负载槽路建立磁化能量1/2LI0^2，补充启动时电路的能量损失；在充磁电容器建立电能1/8CUd^2，保证充磁晶闸管和逆变桥主晶闸管之间的可靠换流，从而建立可靠的负载换流条件。文章建立了该方法工作过程的数学模型，完成了理论分析，得出了相应的设计公式。仿真验证了该方法的正确性，表明该方法适用于串并联负载谐根逆变器。  相似文献   

9 kW双凸极永磁电机三相桥式变换器     

黄伟君  秦海鸿  王慧贞  严仰光 《勤云标准版测试》2006,(1):27-33

9kW双凸极永磁电机功率控制器的主电路采用三相桥式变换器。与一般的三相桥式变换器相比，本文的三相桥式变换器因受到电机反电势、霍尔传感器位置信号及特定开关工作方式等因素的影响，工作情况复杂，工作原理也有较大差异。文中阐述了基于理想工作情况下的双凸极永磁电机三相桥式功率变换器的工作原理，给出了在电机反电势不对称、霍尔传感器位置信号不准确以及输入电压变化等情况下功率变换器的工作情况，实验证明了该变换器分析的正确性。  相似文献   

Circulating current control method for inductive power transfer system          下载免费PDF全文

DAI Xin  WANG Xiao  WANG Zhihui  TANG Chunsen  SUN Yue 《保鲜与加工》2013,(10):67-73

Inductive power transfer (IPT)technology allows electrical energy to be transferred between two loosely coupled inductors over relatively large air gaps based on electromagnetic induction. In current-fed IPT systems,resonant capacitor voltage distortions and current spikes on the semiconductor switches are easily caused when switches isn’t switched at zero crossing point of resonant voltage. As a result,the EMI level of the system and the switching loss are increased and thus the system transmission stability and efficiency decrease. The article analyzes the production mechanism of circulating current in load resonant high frequency inverter and points out that the resonant frequency change is the real cause. By analyzing the characters of circulating current before and after the zero-crossing points of resonant voltage and relationship between switching frequency and resonant frequency,this paper proposes a method of real-time detection for the direction of circulating current,and regulating the switching frequency in accordance with resonant frequency dynamically to ensure the switching of switch tubes at the zero-crossing points of the resonant capacitor voltage,and thus to inhibit circulating current. An experiental system with the platform of FPGA is set up to verify the effectiveness of this control method.  相似文献   

116MW循环流化床锅炉房的电气优化设计     

宋凤娟 《林业科技情报》2013,45(2):68-70

随着城镇供热的迅速发展,116MW循环流化床锅炉被普遍应用。本文从工程应用和规程规范出发,对116MW循环流化床锅炉房电气设计提出了优化设计方案。  相似文献   

封闭流水式网箱养殖混合供电系统设计     

许明昌 《渔业现代化》2017,44(6)

封闭流水式网箱养殖优点是零排放无污染,符合环保养殖要求,缺点是水质容易恶化,水交换与排污能耗大。为了降低能耗并确保设备正常运行,研发太阳能-市电-柴油发电机混合供电系统。基于蓄电池充放电特性,采用最大功率点跟踪(MPPT)和数字信号处理(DSP)技术实现太阳能智能充放电控制与保护,应用双电源自动转换开关技术实现有序混合供电。太阳能月均发电量250 k W·h,日均供电8.3 k W·h,满足负载日均耗电6.6~8.8 k W·h要求。结果表明,在阳光充足情况下,以太阳能供电为主;当出现连续阴雨天气情况下,供电顺序为蓄电池(充满状态可放电3~4 h)、市电、柴油发电机。随着太阳能系统性价比的提高,节能效果将更加明显。  相似文献