基于模糊建模的混炼胶粘度测量     

樊绍胜  王耀南 《湖南农业大学学报(自然科学版)》2004,31(3)

提出了一种在线测量混炼胶粘度的新方法．该方法以模糊建模技术为基础，综合考虑混炼过程各因素对胶料粘度的影响，建立起胶料粘度的在线测量模型．在模糊建模中，采用T-S模型描述胶料粘度变化的非线性过程，提出了一种基于相似性判别的模糊聚类算法以自动确定合适的聚类组数目，并用实数编码的遗传算法优化全局参数，从而获得了规则简化的、具有较高精度的模糊模型．根据此方法，设计了测量装置，并进行了现场试验．试验结果表明模糊模型输出与实验室测量值基本一致，平均误差较低且最大误差未超过1门尼．该方法较大地提高了橡胶混炼的生产效率，为粘度最优控制奠定了基础．  相似文献   

Boundary-fitted grid in landscape modeling     

Kang-Ren Jin  Yegang Wu 《Landscape Ecology》1997,12(1):19-26

Landscape modeling requires the delineation of system boundaries and interior features. Quite often, these components are complex and difficult to accurately represent. A rectangular grid is used to represent the study and adjacent non-study areas in most cases. When the non-study area occupies a large portion of the grid, computer memory is wasted, and computational time increases. An elliptical grid generator for non-orthogonal curvilinear coordinates is used to generate a boundary-fitted grid for a landscape model. In a boundary-fitted grid coordinate system, one coordinate axis follows the landscape domain boundary and is non-orthogonal to the second axis. The boundary-fitted grid uses elliptic partial differential equations to distribute grid points inside the landscape domain. Although the boundary-fitted grid follows the domain boundary, the grid pattern and point allocation remain structured. Thus, a landscape model can use a boundary-fitted grid without changing the model’s data structure or the computational scheme. In this study, a boundary-fitted grid and a raster-based grid were applied to the Everglades Landscape Fire Model. Use of the boundary-fitted grid decreased model simulation time by about one fifth and computer storage by 58% relative to the raster-based grid. Also, the linear characteristics of interior geographical features such as rivers and airboat trails were preserved by the boundary-fitted grid, but not by the raster-based grid. This preservation provided a more reasonable base map for simulating ecological processes, such as fire across heterogenous landscapes.  相似文献   

几种楼梯面可视化快速参数建模方法     

陈宇拓  黄辉颜华 《中南林学院学报》2005,25(5):88-91

楼梯面的智能化建模问题是建筑、装饰等行业的热点问题．以AutoCAD VBA作为开发工具．给出几种楼梯面可视化参数快速建模方法，并对楼梯面的生成算法进行了探讨．使楼梯面模型的设计更具敏捷化、智能化和可交互性．开发的设计程序可作为AutoCAD命令嵌入到的AutoCAD绘图软件中．以提高用户的设计效率。  相似文献   

Predicting the spatial distribution of ground flora on large domains using a hierarchical Bayesian model     

Hooten  Mevin B.  Larsen  David R.  Wikle  Christopher K. 《Landscape Ecology》2003,18(5):487-502

Accomodation of important sources of uncertainty in ecological models is essential to realistically predicting ecological processes. The purpose of this project is to develop a robust methodology for modeling natural processes on a landscape while accounting for the variability in a process by utilizing environmental and spatial random effects. A hierarchical Bayesian framework has allowed the simultaneous integration of these effects. This framework naturally assumes variables to be random and the posterior distribution of the model provides probabilistic information about the process. Two species in the genus Desmodium were used as examples to illustrate the utility of the model in Southeast Missouri, USA. In addition, two validation techniques were applied to evaluate the qualitative and quantitative characteristics of the predictions.This revised version was published online in May 2005 with corrections to the Cover Date.  相似文献   

Anthropogenic influences on potential fire spread in a pyrogenic ecosystem of Florida, USA   总被引：1，自引：1，他引：1  

Brean W. Duncan  Paul A. Schmalzer 《Landscape Ecology》2004,19(2):153-165

Fire has historically been an important ecological factor maintaining southeastern U.S. vegetation. Humans have altered natural fire regimes by fragmenting fuels, introducing exotic species, and suppressing fires. Little is known about how these alterations specifically affect spatial fire extent and pattern. We applied historic (1920 and 1943) and current (1990) GIS fuels maps and the FARSITE fire spread model to quantify the differences between historic and current fire spread distributions. We held all fire modeling variables (wind speed and direction, cloud cover, precipitation, humidity, air temperature, fuel moistures, ignition source and location) constant with exception of the fuel models representing different time periods. Model simulations suggest that fires during the early 1900's burned freely across the landscape, while current fires are much smaller, restricted by anthropogenic influences. Fire extent declined linearly with patch density, and there was a quadratic relationship between fire extent and percent landscape covered by anthropogenic features. We found that as little as 10 percent anthropogenic landcover caused a 50 percent decline in fire extent. Most landscapes (conservation or non-conservation areas) are now influenced by anthropogenic features which disrupt spatial fire behavior disproportionately to their actual size. These results suggest that land managers using fire to restore or maintain natural ecosystem function in pyrogenic systems will have to compensate for anthropogenic influences in their burn planning. This revised version was published online in May 2005 with corrections to the Cover Date. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Integration of pharmacokinetic–pharmacodynamic for dose optimization of doxycycline against Haemophilus parasuis in pigs          下载免费PDF全文

Y. Wang  A. Sajid  S. Ahmed  X. Li 《Journal of veterinary pharmacology and therapeutics》2018,41(5):706-718

The aims of this study were to establish optimal doses of doxycycline (dox) against Haemophilus parasuis on the basis of pharmacokinetic–pharmacodynamic (PK‐PD) integration modeling. The infected model was established by intranasal inoculation of organism in pigs and confirmed by clinical signs, blood biochemistry, and microscopic examinations. The recommended dose (20 mg/kg b.w.) was administered in pigs through intramuscular routes for PK studies. The area under the concentration 0‐ to 24‐hr curve (AUC_0–24), elimination half‐life (T_½ke), and mean residence time (MRT) of dox in healthy and H. parasuis‐infected pigs were 55.51 ± 5.72 versus 57.10 ± 4.89 μg·hr/ml, 8.28 ± 0.91 versus 9.80 ± 2.38 hr, and 8.43 ± 0.27 versus 8.79 ± 0.18 hr, respectively. The minimal inhibitory concentration (MIC) of dox against 40 H. parasuis isolates was conducted through broth microdilution method, the corresponding MIC₅₀ and MIC₉₀ were 0.25 and 1 μg/ml, respectively. The Ex vivo growth inhibition data suggested that dox exhibited a concentration‐dependent killing mechanism. Based on the observed AUC_24 hr/MIC values by modeling PK‐PD data in H. parasuis‐infected pigs, the doses predicted to obtain bacteriostatic, bactericidal, and elimination effects for H. parasuis over 24 hr were 5.25, 8.55, and 10.37 mg/kg for the 50% target attainment rate (TAR), and 7.26, 13.82, and 18.17 mg/kg for 90% TAR, respectively. This study provided a more optimized alternative for clinical use and demonstrated that the dosage 20 mg/kg of dox by intramuscular administration could have an effective bactericidal activity against H. parasuis.  相似文献   

Challenges in developing and implementing a decision support systems (ETÇAP) in forest management planning: a case study in Honaz and Ibradı, Turkey     

Emin Zeki Başkent  Ali İhsan Kadıoğulları 《Scandinavian Journal of Forest Research》2014,29(7):121-131

Decision support systems (DSSs) are indispensable tools in preparing a forest management plan for a better combination of multiple forest values. This study attempted to develop and explain a stand-based forest management DSS (Ecosystem-based multiple-use forest planning [ETÇAP]) comprising a traditional simulation, linear programming (LP), metaheuristics and geographic information system. The model consists of five submodels; traditional management approach to handle inventory data, an empirical growth and yield model, a simulation to conceptualize management actions, a LP technique to optimize resource allocation and a simulated annealing approach to directly create a spatially feasible harvest schedule. The ETÇAP model has been implemented in a comparative two case study areas; Denizli–Honaz and Akseki–Ibrad?. Both simulation and optimization models outperformed to the traditional management plan. The periodical change of growing stock, allowable cuts, carbon sequestration and water production are used as performance indicators. The results showed that more amount of wood could be harvested over time compared to traditional level of harvesting. It could be concluded that various management strategies allowed managers to stimulate more decision options for better outputs through intertemporal trade-offs of management interventions as the model provided tools to quantify forest dynamics over time and space. Challenges exist to establish the functional relationships between forest structure and values for better quantification and integration into the management plans.  相似文献   

Temperature modeling of a land-based aquaculture system for the production of Gracilaria pacifica: Possible system modifications to conserve heat and extend the growing season     

《Aquacultural Engineering》2015

Temperature control is a major cost for numerous aquaculture systems. Solar thermal engineering techniques can be used to identify inexpensive methods for conserving and capturing heat. Gracilaria pacifica, also known as the culinary ingredient ogo, is currently grown in land-based tanks at a site in Goleta, CA where influent sea water temperatures infrequently reach the 21–28 °C range that provides for optimal growth. The major objective of this study was to explore various designs of a G. pacifica tank culture system that maintain optimal water temperature year round to maximize growth. A model was constructed and calibrated by comparing results to a one-third scale pilot system operated in Davis, CA. For model calibration the most sensitive parameter such as cover optical properties were adjusted first and less sensitive parameters were adjusted later. The pilot system consisted of six tanks, three insulated with foam and a clear polyethylene cover (experimental), and three uninsulated and uncovered (controls). The model had weather data inputs including air temperature, humidity, wind speed, and solar radiation. The model was then compared to a full-scale system operated in Santa Barbara during the winter. The experimental pilot system was 4.93 °C warmer than the control pilot system under optimal weather conditions. The full-scale experimental system was 2.80 °C warmer than the control system under non-ideal conditions. The model demonstrated predictive accuracy under most weather conditions. Furthermore the model is robust enough to accept estimated values for many inputs and still produce accurate results, this suggests a simpler model may be feasible. A polyethylene cover and insulation are not sufficient in general for raising the water temperature to the optimum range during the winter; they may be during other times of the year when more solar energy is available, thereby extending the growing season.  相似文献   

基于Simulink的液压系统建模与仿真     

商英丽  陈志雄 《农业装备与车辆工程》2020,58(3):47-49

针对农业机械中液压系统结构复杂、研发周期长等问题,通过分析农业机械中液压回路各个组成元件特性,基于Simulink构建元件动态数学模型。对液压回路进行研究,分析了液压回路在不同元件参数下的动态性能,为优化液压回路系统提供参考。  相似文献   

基于SVM的CFRW导电性建模预测研究     

黄跃娟  郭子玉  刘洪颜 《林业机械与木工设备》2011,39(9)

针对碳纤维增强木质复合材料（CFRW）导电性具有非线性的特点，采用基于支持向量回归机（SVM）的机器学习方法建立碳纤维增强木质复合材料导电性预测模型。结果表明，所建模型的预测精度高、泛化能力强.  相似文献