不同增稠剂对农药可分散油悬浮剂稳定性的影响     

陈罗云  姜震东  刘江钰  郑鹭飞  吴学民 《农药学学报》2020,22(2):233-242

为明确不同增稠剂对以矿物油为分散介质的油悬浮体系稳定性的影响,以12.5%丙炔·吡嘧(丙炔噁草酮·吡嘧磺隆)可分散油悬浮剂为对象,通过流变学和多重光散射方法,研究了有机膨润土、有机高分子和气相二氧化硅3类增稠剂单独使用及有机膨润土和其他两类增稠剂分别搭配使用对可分散油悬浮剂物理稳定性的影响。结果表明:所有样品的流动特性指数(n)均小于1,为假塑性流体,具有触变性。除有机膨润土和高分子增稠剂Atlox Rheostrux100组合使用时体系更符合Casson方程外,其余样品均更符合Herschel-Bulkley方程。单独使用时,有机膨润土对保证体系稳定的效果相对较好;Atlox Rheostrux 100和Atlox Rheostrux200两种高分子增稠剂的效果差别较大,其中Atlox Rheostrux 100效果更好,这可能是由分子结构差异造成;两种气相二氧化硅类增稠剂由于不能有效形成氢键,效果较差。将有机膨润土和有机高分子增稠剂组合使用时,体系的稳定性有所提升,其中有机膨润土869和Atlox Rheostrux 100组合使用效果更好,体系具有较高的黏度,且具有良好的触变性,物理稳定性优异;有机膨润土869和疏水气相二氧化硅R974组合使用时则效果没有明显的提升。研究表明,流变学和多重光散射两种方法均能较好地表征可分散油悬浮剂的物理稳定性;新型高分子增稠剂和有机膨润土具有协同作用,将二者合理组合添加能大幅提升可分散油悬浮剂的稳定性。  相似文献   

Structural,rheological and gelatinization properties of wheat starch granules separated from different noodle-making process     

《Journal of Cereal Science》2020

In this study, three typical wheat cultivars (ZM366, AK58, and ZM103) with high, medium, and low gluten strength, respectively, were selected as the raw material. The starch granules separated from different stages of the noodle-making process, including kneading, resting, sheeting, cutting, and drying, were used to explore the structure, dynamic rheology, and quality of the noodles. The D50 (median diameter) of the starch granules decreased during the noodle-making process, and the reduction was enhanced by an increase in the gluten strength of the flour. Between steps 4 and 5 of the noodle-making process, the solubility of ZM103 variety increased from 4.3% to 5.0% at 80 °C, while the peak viscosity decreased from 3626 to 3386 mPa s, which resulted in a decrease in the cooking loss of noodles. Similar trend was observed in the ZM366 and AK58 varieties. The gelatinization enthalpy was reduced, suggesting that the crystalline regions of the starch granules were destroyed during the kneading process. Between steps 4 and 5 of the noodle-making process, the elastic modulus of the starch granules significantly increased, while the temperature at which maximum elastic modulus was decreased, indicating an increase in the crystalline stability of starch during the drying process. Correlation analysis indicated that the changes occurred to the gelatinization property was primarily due to the change in the particle size.  相似文献   

小麦面条和面过程不同阶段面絮的划分与自动识别     

史赵建  胡新中  李亮  刘玲  雷洋 《农业工程学报》2022,38(5):279-287

和面是小麦面条加工过程中重要的一道工序,主要依据人工经验判断和面终点,缺少基于客观分析的自动化评价方法。为了实现和面过程的自动化,该研究依据小麦面条和面过程中面絮颗粒宏观状态,通过面絮状态图像的数据分析,并且从面条质构、水分状态及分布、蛋白质分子特性及微观结构揭示和面阶段划分的依据。结果表明,和面过程可以划分为初始面粉（阶段1）、润湿黏连（阶段2）、聚集成形（阶段3）、破裂分散（阶段4）和稳定平衡（阶段5）5个阶段,阶段5占和面总时间的50%左右;从阶段2到稳定平衡阶段初期（阶段5-1）,面片的硬度、弹性和咀嚼性逐渐增加并达到最大,在稳定平衡阶段中后期（阶段5-2、5-3）,面片硬度等指标数值下降;低场核磁共振与核磁共振成像分析结果表明,阶段2的水分自由度高,和面过程加速了水分在固、液、气三相之间的交换,并在阶段5达到稳定;所有和面阶段中氢键、离子键的强度明显低于疏水相互作用的强度,游离巯基含量在阶段5-2、5-3逐渐降低至稳定,二硫键含量在此阶段逐渐增多并保持稳定,蛋白质实现充分交联,决定了面条微观结构和宏观状态。构建基于深度学习的Transfer-ResNet50网络模型,实现和面阶段面絮图像的自动识别,模型识别准确率达98.5%,具有良好的可靠性,可以实现和面终点的自动判断。综上所述,面絮宏观颗粒状态可以作为和面过程划分的可靠依据,深度学习也为小麦面条和面过程自动控制提供新的思路。  相似文献   

不同含水率高易溶盐含量的伊犁黄土流变特性     

梁志超  张爱军  任文渊  胡海军  王毓国  李双村 《农业工程学报》2023,39(5):90-99

流变学研究方法可以揭示黏弹性物质的流动和变形规律,常被应用于土体结构的力学稳定性及长期变形参数研究。为了深入探究伊犁黄土类土的黏弹性和结构稳定性,该研究采用流变仪对不同含水率和易溶盐(Na₂SO₄)含量的伊犁黄土类土进行了稳态和动态流变试验,引入Bingham模型对小剪切速率下的流变曲线进行了拟合,并分析解释了稳态和动态流变试验的演化过程。同时,讨论了含水率及易溶盐含量对稳态和动态流变参数的影响规律,定量分析了流变参数与各变量之间的关系。结果表明：稳态剪切过程中土体由固态向类固态转化,并最后趋于流态,具有剪切变稀行为;随着含水率及易溶盐含量增大,屈服应力和黏度均减小,且屈服应力在300～1 100 Pa之间。随着含水率和易溶盐含量增大,动剪切强度参数和黏弹性参数均线性减小,土体的结构稳定性降低。当剪切应变小于0.1%时,土体处于线性黏弹区,损耗因子变化不大;剪切应变大于0.1%时,损耗因子逐渐增大。高含水率及高易溶盐含量的土壤最先到达屈服点,说明高含水率和高易溶盐含量不利于土体结构的稳定性。随着含水率的增大,易溶盐含量对流变参数的影响程度变小...  相似文献   

基于低场核磁和差示量热扫描的面条面团水分状态研究   总被引：3，自引：8，他引：3  

刘锐  武亮  张影全  张鹤岭  张波  黄柏林  魏益民 《农业工程学报》2015,31(9):288-294

为了解低水分面条面团中水分的存在状态,明确真空度及和面时间对水分状态的影响,该研究以3个小麦品种（济麦20、宁春4号、济麦22）磨制的面粉为材料,采用真空和面制作低水分面条面团（含水率35%）,采用低场核磁共振技术（LF-NMR,low-field nuclear magnetic resonance）和差示量热扫描（DSC,differential scanning calorimetry）2种技术,测定不同真空度（0、0.06、0.09 MPa）和搅拌时间（4、8、12 min）下面团中水分的形态和分布,并进一步分析2种技术测定水分形态结果的相关性。结果表明,在低水分面条面团中,水分主要以弱结合水形态存在。不同品种的小麦粉面团的水分形态及分布存在差异,强筋小麦粉（济麦20）制作面团的水分自由度较低。真空和面（0.06 MPa）可以促进水分与面筋蛋白的相互作用,降低面团中水分子流动性,促进水分结构化;而非真空或过高真空度均会导致面团中水分自由度增加。济麦20、济麦22小麦粉和面时间为8 min时,面团水分流动性较低;而宁春4号小麦粉面团在4 min时,水分自由度较低;继续搅拌,深层结合水减少、弱结合水增多。LF-NMR和DSC测得面团水分状态的结果具有一致性。LF-NMR测得的弱结合水峰面积百分比与DSC测得的可冻结水百分比具有相同的变化趋势（r=0.695）,且深层结合水峰面积百分比与非冻结水百分比具有相同的变化趋势（r=0.564）。研究结果为认识制面过程中水分的作用,优化和面工艺和调整产品特性提供参考。  相似文献   

基于本构模型的颗粒饲料成型特性研究   总被引：1，自引：3，他引：1  

陈啸  孔丹丹  王红英  方鹏 《农业工程学报》2017,33(23):267-275

为研究饲料原料挤压成型特性,构建了非线性黏弹塑性颗粒饲料成型本构模型,针对主要饲料原料小麦,通过分析成型试验因素对其本构模型系数及其表征的流变学特性的影响,研究物料特性、加工参数等对小麦原料成型特性的影响规律,并分析了模型系数与颗粒成型质量的相关性关系。黏弹塑性本构模型由牛顿黏滞体(Newton viscous dashpot element)、应变硬化弹簧元件(strain hardening spring element)和库伦摩擦元件(Coulomb friction element)构成,基于小麦原料的实际成型试验完成模型构建;模型验证结果显示:数值结果中各应力区间模型决定系数R2在0.99以上,模型值与试验值较为吻合,相对误差总平均值为3.378%,并通过χ2检验进一步证明模型有效性;应用本构模型对小麦原料成型特性的分析结果显示,表征其流变学特性的模型系数表现出明显的应力函数规律,黏性系数绝对值随着挤压过程的进行逐渐减小,弹性模量值逐渐增大,集成塑性系数值则表现为先增后降,而各成型试验因素对模型系数产生了显著规律性影响,与宏观试验现象比较吻合;通过Pearson相关性分析可知颗粒成型密度、颗粒成型率、颗粒成型硬度等成型质量指标分别与黏性系数、塑性模量与弹性模量间达到了最高的相关系数,数值皆在0.80以上且为极显著相关性水平(P0.001),为基于本构模型对颗粒成型质量进行分析和控制提供依据。研究结果为颗粒饲料挤压成型特性研究提供了一种新方法和新角度,也为颗粒饲料的高效低耗生产和产品质量的改善提供基础数据和理论参考。  相似文献   

Non-linear rheological behavior of gluten-free flour doughs and correlations of LAOS parameters with gluten-free bread properties     

《Journal of Cereal Science》2017

  相似文献   

A new lean no time test baking method with improved discriminating power     

《Journal of Cereal Science》2017

In response to customer concerns related to gluten strength in commercial baking, the Canadian Grain Commission assessed whether the Canadian Short Process (CSP) test bake method was generating useful data related to intrinsic strength of wheat varieties. Assessment of CSP loaf volume data for Canadian variety trials spanning 2003 to 2013 showed very little correlation with dough strength parameters as measured by farinograph and extensigraph. A lean no time (LNT) test baking method was developed that can better discriminate genotypes and provide objective indicators of the effect of intrinsic dough strength on baking quality. From early method development, through method validation and verification using diverse sets of samples targeting different Canadian wheat classes and grown in three different crop years, results showed the LNT method to be more discriminating and easily adopted by other laboratories. In 2015, the LNT method was adopted as the method of choice in future Canadian variety registration trials. The LNT method is fast, simple and well-suited to high throughput test baking conditions encountered in the evaluation of large numbers of breeder lines. A new objective parameter, loaf top ratio, was also introduced and found to correlate well with dough strength and dough handling properties.  相似文献   

Dough rheological properties and noodle-making performance of non-waxy and waxy whole-wheat flour blends     

《Journal of Cereal Science》2017

Dough rheological properties and noodle-making performance of non-waxy whole-wheat flour (WWF) with partial- or full-waxy (PW- or FW-) WWF substitution were studied. The substitution levels were 0, 250, 500, 750, and 1000 g/kg, respectively. FW-WWF reduced the peak viscosity and pasting temperature of WWF blends as its substitution level was increased due to its higher proportions of B-type starch granules and short amylopectin chains, while PW-WWF increased peak viscosity with the increasing substitution level because of its higher amylopectin content. As demonstrated by farinograph and rheometer measurements, FW-WWF interfered with gluten development because of the increased competition for water by arabinoxylans and amylopectin; however, PW-WWF enhanced dough strength due primarily to its increased protein content. Consequently, FW-WWF showed a detrimental effect on cooked noodle texture as the cooked noodle hardness was reduced by 50% at the 1000 g/kg substitution level. In contrast, PW-WWF enhanced noodle integrity and elasticity by increasing cooked noodle cohesiveness and resilience by 10.1% and 14.8%, respectively, at the 1000 g/kg substitution level. The results suggest that with waxy WWF substitution, the changes in starch composition, arabinoxylans, and protein content could modify the interactions among flour components and influence the quality characteristics of noodle products.  相似文献   

Extensional rheological properties in mixed and fermented/rested dough and relationships with steamed bread quality     

《Journal of Cereal Science》2020

In this study, sixteen wheat varieties for cultivation in China were examined for the flour characteristics using the farinograph, extensograph and rheofermentometer, uniaxial extensional rheology employing the extensograph and the Kieffer extensibility rig and biaxial extension by uniaxial compression of mixed dough with and without yeast, rested and fermented dough, and steamed bread quality including specific volume and texture properties. Three statistical analysis methods including Pearson correlation, principle component and stepwise multiple regression analysis were carried out to correlate dough properties with steamed bread quality. Biaxial extension viscosity was positively correlated with texture properties (hardness and chewiness) of steamed bread (r = 0.521–0.685, p < 0.05). Based on the correlation coefficients and the model (r² = 0.852, p = 0.003) obtained using stepwise multiple regression analysis, the best predictors for specific volume of steamed bread were the maximum resistance to extension of rested dough (r = 0.664, p < 0.01) and total work for breakage of fermented dough (r = 0.662, p < 0.01). Principal component analysis of rheological properties of fermented dough and flour characteristics provided more useful information for discriminating wheat flour quality and help breeders to select most convenient wheat flour for the steamed bread making.  相似文献