Use of netting and whitewash spray to protect papaya plants against Nivun Haamir (NH)-dieback disease     

A. Franck  M. Bar-Joseph 《Crop Protection》1992,11(6):525-528

A disease causing the decline of papaya (Carica papaya) plants was noticed in the Jordan Valley in 1982. The disease caused severe yellowing of the upper leaves and dieback of the apex. The disease was not transmissible mechanically and continued efforts to associate viruses and viroids have so far been unsuccessful. Epidemiological observations suggested that the disease is airborne and probably caused by a mollicute. In order to test this hypothesis, plots were covered by an insect-proof net and with white nets providing 15, 30 and 50% shade. The 30%, 50% and insect-proof nettings provided complete protection, and the 15% netting reduced disease incidence to <2%, compared with>37% in the uncovered control plot. Spraying plants at weekly intervals with a commercial whitewash solution was also found to be effective in reducing disease incidence. The advantages of using a range of netting field treatments as a simple means for obtaining information on the epidemiological nature of a new disease are described.  相似文献   

高压无气喷涂工艺在大型储罐上的应用     

杨占品  范传宝  鲍善彩 《油气储运》2006,25(6):52-54

分析了大型储罐传统防腐涂装方式的特点,指出了采用新型涂装方式的必要性,介绍了高压无气喷涂工艺的预处理、实施及注意事项,分析了高压无气喷涂工艺的实施效果,提出了储罐防腐的建议.  相似文献   

几种叶面肥料在小菊上的筛选与应用研究     

马燕  刘育俭 《农业科技与信息》2006,(12)

试验采用单因素随机区组设计,叶面喷施肥料的施肥方法,应用方差分析和多重比较分析试验数据,从而筛选出小菊最佳的营养元素配方。试验从不同叶面肥料在小菊上的筛选与应用研究的试验结果得到：小菊对肥料具有较强的选择性：三高灵的施用能够增加小菊的开花数量和鲜叶片叶绿素的含量；宝力丰的施用能提高小菊单株的干物重；OPAL的施用能延长小菊开花的花期。  相似文献   

二化螟在茭白上的钻蛀行为及其防治方法   总被引：2，自引：1，他引：2  

俞晓平  郑许松  徐红星  陈建明  张珏锋 《植物保护学报》2004,31(1):26-32

研究了二化螟在茭白植株上的转移、钻蛀和产卵行为以及取食选择性,并根据其行为特性,制订合理的药剂喷施方法.结果表明,二化螟90%以上的卵产在茭白的叶片上,其余部分产在叶鞘上.产卵的主要叶位是心叶、倒一叶和倒二叶.超过50%的卵块集中在叶片距叶枕0～60cm的部位.幼虫孵化后,蚁螟蛀入的部位一般在叶枕以下的叶鞘内侧,多集中于倒四、倒五叶鞘.2龄后开始钻蛀内侧叶鞘,并蛀入茭白茎的内芯,二化螟幼虫在茭白植株上通常从叶片转移到叶鞘进行钻蛀危害.幼虫嗜食茭白茎部,其次为茭白果肉和叶鞘,对叶片几乎不取食.使用叶鞘喷施杀虫可达到对茭白进行全株喷雾同样的防治效果,并可节省40%～50%的用药量,经济和生态效益十分明显.  相似文献   

多品种叶面肥水稻田间应用效果探析   总被引：1，自引：0，他引：1  

董中华  王泽松 《安徽农业科学》2015,(30)

[目的]为大面积推广应用多品种叶面肥提供科学依据。[方法]在水稻作物上施用不同品种的叶面肥产品,对比不同叶面肥产品在水稻上的应用效果和经济效益。[结果]在抽穗阶段喷施根外生长调节剂,取得较明显的效果。[结论]根外追肥取得良好的效果,可以继续推广。  相似文献   

纳米硅肥的制备及对苋菜生长的影响     

裴福云  董超文  陈文哲  杨勇  房钦飞  段继贤  黄培钊  王德汉 《杂粮作物》2015,(6)

[目的]探索纳米硅肥对苋菜生长的影响。[方法]以硅酸四丁酯为原料制备了纳米二氧化硅，用物理研磨的方式加工硅藻土得到纳米硅藻土。[结果]在盆栽红苋菜上叶面喷施几种硅肥，结果表明，苋菜鲜重和干重明显增加、可溶性糖大幅度提高。在喷施等量硅藻土和纳米硅藻土后，与对照处理相比产量分别提高了11%、31%。对比喷施相同含硅量的纳米硅藻土、纳米二氧化硅后，发现苋菜干物质量分别提高43.4%和14.9%；吸收氮磷钾总量分别提高了36%和20%。[结论]纳米硅藻土肥效较好。试验结果为未来矿石资源的应用提供了实践基础。  相似文献   

Zn distribution and bioavailability in whole grain and grain fractions of winter wheat as affected by applications of soil N and foliar Zn combined with N or P     

《Journal of Cereal Science》2015

A two-year field experiment was conducted to investigate the effects of foliar Zn combined with N or P on Zn concentration and bioavailability in wheat grain and its milling fractions under different soil N levels. At maturity, grains were harvested and fractionated into flour and bran for nutrient analysis. Both high soil N supply and foliar Zn-enriched fertilizer applications greatly increased Zn concentration and bioavailability in both whole grain and grain fractions. Compared with foliar Zn alone, foliar Zn combined with N increased Zn concentration and bioavailability, whereas foliar Zn combined with P decreased Zn concentration and bioavailability. However, foliar Zn combined with P slightly increased the protein concentration compared to foliar Zn alone. Protein concentration significantly increased, whereas phytate concentration decreased, in whole grain and flour, both in soil N and foliar Zn-enriched N treatments. Therefore, foliar Zn plus N (with appropriate soil N management) may be a promising strategy for addressing dietary Zn micronutrient deficiencies, especially in countries where flour is a significant component of the daily diet.  相似文献   

Economics of foliar fungicides for hard red winter wheat in the USA southern Great Plains     

《Crop Protection》2014

Grain yields of winter wheat (Triticum aestivum L.) in the southern Great Plains are often reduced by the presence of foliar diseases. This study was conducted to determine whether the application of foliar fungicides is an economically optimal management strategy. The effects of fungicide treatment on commercially available hard red winter wheat varieties with differing levels of genetic resistance (i.e., resistant, intermediate, and susceptible) to foliar diseases were investigated at two locations, Apache and Lahoma, OK, USA, for the harvest years 2005–2012. Two fungicides were rotated between the two locations and applied at approximately Feekes growth stage 9–10.5. When averaged across years, plots to which fungicide was applied generated greater average net returns than plots that did not receive fungicide for susceptible varieties at Apache, and for resistant, intermediate, and susceptible varieties at Lahoma. However, foliar fungicide application was not economical in every year at either location suggesting fungicide use should be reassessed each year given that profitability depends on year specific yield potential, prices, and foliar disease conditions. At both locations high disease incidence occurred in all but one site-year when the average March through May relative humidity exceeded 65%. Additional research would be required to determine the relationship between weather, including relative humidity, and disease incidence, and to develop an economic threshold for treatment decision aid.  相似文献   

Evaluation of the pattern of spray released from a moving multicopter     

Illia Chyrva  Mark Jermy  Tara Strand  Brian Richardson 《Pest management science》2023,79(4):1483-1499

BACKGROUND

Multicopters are used for releasing particulates seeds, fertilizer and spray. Their low cost and high manoeuvrability make them attractive for spraying in steep terrain and areas where overspray is undesirable. This article describes a model of multicopter wake and its influence on particulate dispersion, which is computationally economical compared to many computational fluid dynamics (CFD) approaches, yet retains reasonable accuracy.

RESULTS

A model was successfully implemented in OpenFOAM . It features source terms for the rotor wash, Lagrangian particle tracking, an evaporation model, and a porous medium approach to model the effect of the ground vegetation. Predictions were validated against the field tests of Richardson et al. which used a DJI Agras MG-1 multicopter in three different flights with airspeeds of 3.2–4.9 m s⁻¹, ground speeds of 2.1–2.9 m s⁻¹ and cross-wind speeds of 0.04–2.2 m s⁻¹. The effective swath width (30% line separation) was predicted to within one standard deviation. Sensitivity to a rotor rotational speed, flight height, flight velocity, multicopter roll and yaw angles, surface roughness length, plant height and leaf density was checked.

CONCLUSION

In all flight trials, the modelled swath was closest to the experimentally obtained swath when the surface roughness of the fetch was equal to 0.5 m (bushes) and the rotational speed of all rotors was equal to 2475 rpm with 0.75R (0.2 m) tall plant canopy (grass) introduced to the model. The model showed acceptable validity for flight velocities of ≤2.8–5 m s⁻¹ when flight parameters can be approximately estimated. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.  相似文献   

METAL MATRIX PARTICULATE COMPOSITES BY SPRAYING CODEPOSITION     

Peng Xiaodong Qian Hancheng Zhang Xiaomei 《保鲜与加工》1992,(5):77-82

The spraying codeposition process is used to produce metal matrix paniculate composites, whose technical procedure and main processing parameters are analyzed. The microstructure of the composites is examined and the properties are tested. The solidification characteristics in the spraying deposition and solidification process are discussed. The results indicate that several problems involved in conventional methods can be overcome with this technique to preduce metal matrix paniculate composites. The reinforce particles are dispersed in the matrix homogeneously without solidification segregation. Compared with the matrix alloy,the composite proves to be harder and has excellent wear resistance.  相似文献