| 基于ANSYS的某型浮钳盘式后制动器有限元分析 |
| |
| 引用本文： | 赵韩,李丽,钱立军.基于ANSYS的某型浮钳盘式后制动器有限元分析[J].拖拉机与农用运输车,2009,36(2). |
| |
| 作者姓名： | 赵韩 李丽 钱立军 |
| |
| 作者单位： | 合肥工业大学,机械与汽车工程学院,合肥,30009 |
| |
| 摘 要： | 基于某型浮钳盘后制动器建立UG三维模型后,根据该制动器在制动过程中所受力,并考虑边界条件,进行了ANSYS有限元分析,分析得到的应力和变形验证了该型制动器结构设计的合理性。
|
| 关 键 词： | 浮钳盘式后制动器 边界条件 有限元分析 |
FEA for Floating Caliper Rear Brake Based on ANSYS |
| |
| ZHAO Han,LI Li,QIAN Li-jun.FEA for Floating Caliper Rear Brake Based on ANSYS[J].Tractor & Farm Transporter,2009,36(2). |
| |
| Authors: | ZHAO Han LI Li QIAN Li-jun |
| |
| Abstract: | The advantages of disk brake are briefly demostrated in this paper.The 3D modeling of a floating caliper rear brake is built in UG.Then with its boundary conditions during braking,the finite element analysis is applied to it.Based on the analysis,the stress and deformation of the brake during braking are calculated,which signifies that the clamp and bracket's design is successful. |
| |
| Keywords: | Floating caliper rear brake Boundary conditions Finite element analysis |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
