| 蔬菜移栽机凸轮-连杆组合式取苗机构设计与试验 |
| |
| 引用本文： | 贾毕清,叶梦蝶,翟晓南,韩绿化,吕建强.蔬菜移栽机凸轮-连杆组合式取苗机构设计与试验[J].农机化研究,2019(6):78-82. |
| |
| 作者姓名： | 贾毕清 叶梦蝶 翟晓南 韩绿化 吕建强 |
| |
| 作者单位： | 江苏联合职业技术学院淮安生物工程分院;江苏大学机械工程学院;江苏大学现代农业装备与技术教育部重点实验室;淮阴工学院机械与材料工程学院 |
| |
| 基金项目： | 国家自然科学基金项目(51475216);江苏省农业科技自主创新资金项目(CX(15)1033-5);江苏省高校自然科学研究面上项目(16KJB210002);江苏省苏北科技专项(BN2016098);江苏大学第16批学生科研项目(16B172) |
| |
| 摘 要： | 基于我国蔬菜生产实践,设计了一种凸轮-连杆组合式取苗机构。该取苗机构为Ⅰ型串联组合式创新机构,利用凸轮机构的任意运动规律特性,经双摇杆机构运动传递和放大,驱动滑块上的取苗末端执行器在限位滑道内垂直穴盘取苗、直立投苗。采用虚拟样机技术分析了取苗机构的运动特性,该机构能较好地代替人工完成自动取苗和投苗动作。试制了物理样机,进行自动取苗性能测试。结果表明:当取苗频率为40株/min时,取苗成功率平均值为92.03%,自动取苗效果较好。
|
| 关 键 词： | 穴盘苗 移栽机 取苗机构 机构组合 仿真分析 |
Design and Tests of Cam-link Combination Pick-up Device for Vegetable Transplanters |
| |
| Jia Biqing,Ye Mengdie,Zhai Xiaonan,Han Lvhua,Lv Jianqiang.Design and Tests of Cam-link Combination Pick-up Device for Vegetable Transplanters[J].Journal of Agricultural Mechanization Research,2019(6):78-82. |
| |
| Authors: | Jia Biqing Ye Mengdie Zhai Xiaonan Han Lvhua Lv Jianqiang |
| |
| Institution: | (Higher Vocational School of Huaian Biological Engineering,Huaian 223001, China;Jiangsu University, a.School of Mechanical Engineering,Ministry of Education, Zhenjiang 212013, China;Key Laboratory of Modern Agriculture Equipment and Technology, Ministry of Education, Zhenjiang 212013, China;Faculty of Mechanical and Material Engineering, Huaiyin Institute of Technology, Huaian 223003, China) |
| |
| Abstract: | Through a creative design of the I-type mechanism combination in series, a path manipulator to generate the appropriate working trajectory of seedling extraction was designed. It consists of three basic mechanisms. The postpositional offset slider-crank mechanism is to copy the required path of removing the seedlings from nursery trays. The preset cam mechanism creates a satisfactory follower motion law. Through the amplification of the middle four-bar mechanism, the postpositional mechanism under the control of the preset cam mechanism moves the end-effector to auto-extract seedlings from growing trays, transfer them, and discharge them into the planting unit where they are to be planted into the ground. The motion analysis of the designed seedling pick-up device was simulated with ADAMS software. The simulations indicated that this system is reasonable in overall design. Being the first prototype, the working efficacy of picking up seedlings from the cells was tested. The laboratory evaluation showed that the pick-up device can extract 40 seedlings / min with an average success ratio of 92.03%. The quality of extracting, transferring and discharging seedlings was satisfactory. |
| |
| Keywords: | plug seedling transplanter pick-up device mechanism combination simulatio |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
