| 用常规设备加工微薄零件 |
| |
| 引用本文： | 彭增辉.用常规设备加工微薄零件[J].中南林业科技大学学报,1994(2). |
| |
| 作者姓名： | 彭增辉 |
| |
| 作者单位： | Dept. of Mechanical Engineering，C S F U |
| |
| 摘 要： | 在对微薄套类零件的加工难点进行分析的基础上，通过反复试验研究，提出了用常现设备加工这类零件的主要技术措施，筛选出在实际中可操作的工艺方案，为用常规设备加工这类零件提供了一种可行的技术方法，可以在有关工厂推广应用．
|
| 关 键 词： | 微薄零件 金属切削 套筒 工艺方案 技术措施 |
Machining of Micro Sleeve Parts with Conventional Epuipments |
| |
| Pan Zenghui.Machining of Micro Sleeve Parts with Conventional Epuipments[J].Journal of Central South Forestry University,1994(2). |
| |
| Authors: | Pan Zenghui |
| |
| Abstract: | Based on full analysis of the difficult points in machining micro sleeve Parts, and through repeated experiments, the principal technical measures for machining micro parts with conventional equipments are put forward and the practical technological project is sifted out. This study also provides a feasible technical method forthe same purpose. The technical method can be applied and popularicad in factories concerned. |
| |
| Keywords: | micro parts metal cutting sleeves technological project technical measures |
| 本文献已被 CNKI 等数据库收录！ |
