首页 | 本学科首页   官方微博 | 高级检索  
     检索      

数字散斑相关方法在木材指接中的应用
引用本文:钟健,李鸿琦,崔小鹏,刘艳,鹿振友,申世杰.数字散斑相关方法在木材指接中的应用[J].北京林业大学学报,2006,28(4):12-16.
作者姓名:钟健  李鸿琦  崔小鹏  刘艳  鹿振友  申世杰
作者单位:天津大学机械工程学院力学系;北京林业大学材料科学与技术学院
基金项目:引进国际先进农业科技计划(948计划)
摘    要:该文将数字散斑相关方法应用于指接木材的力学性能分析.首先编写了一种新的数字散斑相关计算程序,并通过数值模拟的方法验证其适合于拉伸实验;然后将它用于落叶松指接材的拉伸实验.结果表明,指接材在拉伸时齿根处发生了明显的应力集中现象,拉伸破坏首先从这里开始,另外齿长对落叶松指接材的抗拉强度影响较小;同时也证明了该方法用于木材指形接头的位移应变场分析是可行的. 

关 键 词:数字散斑相关  指接  变形测量
文章编号:1000-1522(2006)04-0012-05
收稿时间:07 15 2005 12:00AM
修稿时间:2005-07-15

Application of the digital speckle correlation method on timber with finger-joints
ZHONG Jian,LI Hong-qi,CUI Xiao-peng,LIU Yan,LU Zhen-you,SHEN Shi-jie.Application of the digital speckle correlation method on timber with finger-joints[J].Journal of Beijing Forestry University,2006,28(4):12-16.
Authors:ZHONG Jian  LI Hong-qi  CUI Xiao-peng  LIU Yan  LU Zhen-you  SHEN Shi-jie
Institution:1. Department of Mechanics, Tianjin University, 300072, P. R. China; 2. College of Material Science and Technology, Beijing Forestry University, 100083, P. R. China.
Abstract:The research used the digital speckle correlation method to analyse the mechanical characteristics of timber with finger-joints. At first, the authors programmed to realize the function of Digital Speckle Correlation Method(DSCM). Errors and precision were analyzed with numerically simulated images. Then the application of DSCM on larch with finger-joints was investigated. The results indicated that the focus of stress was concentrated at the associative bottom and the first failure in the experiment occurred there. The length of teeth had little effect on tension of larch. The results also proved the value of using DSCM on timber with finger-joints.
Keywords:Digital Speckle Correlation Method(DSCM)  finger-joints  deformation measurement
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《北京林业大学学报》浏览原始摘要信息
点击此处可从《北京林业大学学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号