|
|||||
|
|
| 氯氧镁水泥竹刨花板热压工艺研究 | |
| 引用本文： | 王增,马灵飞,方崇荣,庄期应,何理辉,杨柳.氯氧镁水泥竹刨花板热压工艺研究[J].浙江林业科技,2012,32(4):48-50. |
| 作者姓名： | 王增 马灵飞 方崇荣 庄期应 何理辉 杨柳 |
| 作者单位： | 1. 浙江农林大学工程学院,浙江临安311300;浙江省林产品质量检测站,浙江杭州310023 2. 浙江农林大学工程学院,浙江临安,311300 3. 浙江省林产品质量检测站,浙江杭州,310023 |
| 基金项目： | 浙江省重大招标项目“速生林木与竹类资源精深加工及高效利用共性关键技术研究及产品开发”(2003C12009) |
| 摘 要： | 研究了热压温度、热压时间工艺参数的改变对氯氧镁水泥竹刨花极性能的影响,结果表明:随着热压时间和热压温度的增加,板材强度不断增强；综合板材性能在各参数下变化的幅度及生产成本的考虑,给出热压温度和时间的推荐参数:热压温度125℃、热压时间12,min或者热压温度100℃、热压时间16 min. |
| 关 键 词： | 工艺参数 热压温度 热压时间 物理力学性能 |
Experiment on Hot Pressing Technology for Magnesium Oxychloride Cement Banded Bamboo Particle Board |
|
| WANG Zeng , MA Ling-fei , FANG Chong-rong , ZHUANG Qi-ying , HE Li-hui , YANG Liu.Experiment on Hot Pressing Technology for Magnesium Oxychloride Cement Banded Bamboo Particle Board[J].Journal of Zhejiang Forestry Science and Technology,2012,32(4):48-50. | |
| Authors: | WANG Zeng MA Ling-fei FANG Chong-rong ZHUANG Qi-ying HE Li-hui YANG Liu |
| Institution: | 1.School of Engineering,Zhejiang A & F University,Lin’an 311300,China;2.Zhejiang Forestry Product Testing Station,Hangzhou 310023,China) |
| Abstract: | Experiment was conducted on effect of hot pressing temperature,pressing time to properties of magnesium oxychloride cement banded bamboo particle board.The results showed that strength of board increased with hot pressing time and temperature.The result recommended hot pressing temperature of 125 ℃ with pressing time of 12 minutes or hot pressing temperature of 100℃ with pressing time 16 minutes. |
| Keywords: | technological parameters hot pressing temperature pressing time physical and mechanical properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |