| Abstract: | A twin‐screw extrusion study was performed in replicated trials to produce vegetable‐based feeds for juvenile yellow perch. Two isocaloric (3.06 kcal/g) experimental diets were balanced to contain 20 and 40% distillers dried grains with solubles (DDGS) and a constant amount (20%) of fermented high‐protein soybean meal (PepSoyGen) as the fishmeal protein replacers; crude protein content was targeted at 40%. A fishmeal‐based diet was used as a control. Extrusion conditions included conditioner steam (0.11–0.16 kg/min), extruder water (0.11–0.19 kg/min), and screw speed (230–300 rpm). Increasing DDGS from 0 to 40% led to a considerable rise in bulk density, lightness L*), yellowness (b*), and unit density but to decreases in water activity (aw) and expansion ratio by 12.6, 14.4, 23, 21, 31, and 13%, respectively. The lowest unit density of 791.6 kg/m3 and highest bulk density of 654.5 kg/m3 were achieved with diets containing 20 and 40% DDGS, respectively; changes in DDGS content did not affect extrudate moisture, absorption index, or thermal properties. Raising DDGS from 0 to 40% resulted in an increase in water solubility and redness (a*) by 13.4 and 35%, respectively. All extrudates had high durability (>98%), and low aw of less than 0.5. Overall, this study yielded viable feeds for yellow perch. |
