首页 | 本学科首页   官方微博 | 高级检索  
     检索      

空间全柔性并联机构动力学分析
引用本文:贾晓辉,刘今越,田延岭.空间全柔性并联机构动力学分析[J].农业机械学报,2012,43(8):210-214.
作者姓名:贾晓辉  刘今越  田延岭
作者单位:1. 河北工业大学机械工程学院,天津,300130
2. 天津大学机械工程学院,天津,300072
基金项目:国家自然科学基金资助项目(50705064)和天津市自然科学基金资助项目(08JCYBJC01400)
摘    要:针对精密柔性机构多自由度高精度运动的需求,以传统Delta并联机构为基础,设计了一种采用压电陶瓷驱动方式的空间柔性并联机构,基于伪刚体模型进行运动学分析。将从动臂质量分布作简化处理并主要考虑结构中柔性铰链的弹性应变能,利用拉格朗日方程建立动力学弹性振动微分方程,得到其固有频率表达式,并结合实际结构参数得到了相应的理论结果。3个主要运动方向的三阶固有频率的试验结果和理论分析结果误差分别为:12.71%、12.14%和14.90%,有限元仿真结果和试验结果误差分别为:6.20%、5.66%和10.28%,表明理论分析时所作的简化处理合理,得到的动力学数学模型有效、可信。

关 键 词:柔性并联机构  动力学  固有频率  有限元仿真

Dynamics Analysis of Spatial Compliant Parallel Mechanism
Jia Xiaohui , Liu Jinyue , Tian Yanling.Dynamics Analysis of Spatial Compliant Parallel Mechanism[J].Transactions of the Chinese Society of Agricultural Machinery,2012,43(8):210-214.
Authors:Jia Xiaohui  Liu Jinyue  Tian Yanling
Institution:Hebei University of Technology;Hebei University of Technology;Tianjin University
Abstract:Due to the requirement of multi-dimensional nanometer level positioning of the compliant precision mechanism,a piezo-driven spatial compliant parallel mechanism was presented through the conventional Delta parallel mechanism.The inverse kinematics was developed on the basis of the Pseudo-Rigid-Body(PRB) model.After the simplifying of the mass of passive arm and calculating the strain energy of the flexure hinges,the dynamic equation was established through the Lagrangian approach,and the natural frequencies are evaluated by utilizing the geometric parameters.Three natural frequency errors,which were along with three primary translation directions,between the experiment results and the theoretical analysis were 12.71%,12.14% and 14.90%.The error between the finite element simulation and the theoretical results were 6.20%,5.66% and 10.28%.The results also showed that the simplified process during the theoretical analysis was reasonable and the derived mathematics model was creditable.
Keywords:Compliant parallel mechanism  Dynamics  Natural frequency  Finite element simulation
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《农业机械学报》浏览原始摘要信息
点击此处可从《农业机械学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号