| 固定式饲草压捆机再次改进研究 |
| |
| 引用本文： | 赵洪刚,杨竹君,高金贵.固定式饲草压捆机再次改进研究[J].中国农机化,2012(1):136-139. |
| |
| 作者姓名： | 赵洪刚 杨竹君 高金贵 |
| |
| 作者单位： | 1. 北华大学木质材料科学与工程省重点实验室,吉林省吉林市,132013
2. 辽源职业技术学院,吉林省辽源市,136201 |
| |
| 基金项目： | 黑龙江省科技厅重点攻关项目，北华大学重大科研攻关项目 |
| |
| 摘 要： | 在中试过程中,主要根据自行研制的固定式饲草压捆机,针对触发弹射式杠杆组分捆机构及其相关机构进一步改进。将分捆机构移至距离压缩止点260mm处,使允许落板时间增至0.795s,而分隔板自由下落时间为0.271s,因此撤去弹射器,简化了结构,还避免了弹跳反射。由于不同种类、不同含水率的饲草压缩反弹量区别较大,将曲柄长度改为480mm,延长了压缩行程,避免饲草反弹堵塞落板口。
|
| 关 键 词： | 落板口 落板时间 反弹量 |
Improvement Research Again of the Fixed Forage Balers |
| |
| ZHAO Hong-gang
,
YANG Zhu-jun
,
GAO Jin-gui.Improvement Research Again of the Fixed Forage Balers[J].Chinese Agricul Tural Mechanization,2012(1):136-139. |
| |
| Authors: | ZHAO Hong-gang YANG Zhu-jun GAO Jin-gui |
| |
| Institution: | 1(1.Wood Material Science and Engineering Key Laboratory of Jilin Province Beihua University,Jilin,132013,China; 2.Liaoyuan Vocational Technology Institute,Liaoyuan,136201,China) |
| |
| Abstract: | In the trial process,having mainly based on self-developed fixed forage balers,further improved the trigger catapult style Leveraged sub-agencies and their relevant agencies.Sub-agencies was moved away from point 260mm at compression,the time that allowed off the board increased to 0.795s,while free-fall time of the divider was 0.271s,so removed catapult to simplify the structure.Because forage of different types and different moisture have higher difference the amount of forage compression rebound,changed the crank length to 480mm,extended the compression stroke to forage rebound off the boards to avoid clogging drop-plate-mouth. |
| |
| Keywords: | drop-plate-mouth drop-plate time the amount of rebound |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
