首页 | 本学科首页   官方微博 | 高级检索  
     检索      

考虑安装误差的摆线齿准双曲面齿轮轮齿接触分析
引用本文:王峰,方宗德,李声晋,苏进展.考虑安装误差的摆线齿准双曲面齿轮轮齿接触分析[J].农业机械学报,2012,43(9):213-218.
作者姓名:王峰  方宗德  李声晋  苏进展
作者单位:西北工业大学机电学院,西安,710072
基金项目:国家自然科学基金资助项目(50875211)
摘    要:基于双刀头(two-part cutter head)分体式刀盘,采用面滚式切制方法加工摆线齿准双曲面齿轮,依据其加工展成原理建立了数学模型,并在考虑安装误差的情况下进行了轮齿接触分析(TCA),得出了安装误差对其啮合性能的影响。在满足传动性能要求的情况下,设计了轮坯参数和机床加工参数。以一对摆线齿准双曲面齿轮为例,分析了各个安装误差对其啮合性能的影响。

关 键 词:摆线齿准双曲面齿轮  端面滚齿  安装误差  轮齿接触分析  啮合性能

Tooth Contact Analysis of Epicycloid Hypoid Gear Considering Assembly Misalignment
Wang Feng,Fang Zongde,Li Shengjin and Su Jinzhan.Tooth Contact Analysis of Epicycloid Hypoid Gear Considering Assembly Misalignment[J].Transactions of the Chinese Society of Agricultural Machinery,2012,43(9):213-218.
Authors:Wang Feng  Fang Zongde  Li Shengjin and Su Jinzhan
Institution:Northwestern Polytechnical University;Northwestern Polytechnical University;Northwestern Polytechnical University;Northwestern Polytechnical University
Abstract:Based on two-part cutter head, the mathematical model of epicycloid hypoid gear pair was built through face-hobbing cutting method and generating principle. The relationship between assembly misalignment and meshing behavior was described by the results of tooth contact analysis. In the situation of transmission performance requirements, the parameters of wheel blank and processing parameters were designed. Based on a pair of epicycloid hypoid gears, the influence of each assembly misalignment on the meshing and transmission performance was analyzed.
Keywords:Epicycloid hypoid gears  Face hobbing  Assembly misalignment  Tooth contact analysis  Meshing performance
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《农业机械学报》浏览原始摘要信息
点击此处可从《农业机械学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号