| 不同切丝模式对烟丝结构与卷烟物理指标的影响 |
| |
| 引用本文： | 韩慧杰,罗光杰,谭科军,李贵川,吴国忠,彭黔荣.不同切丝模式对烟丝结构与卷烟物理指标的影响[J].中国农学通报,2014,30(6):302-305. |
| |
| 作者姓名： | 韩慧杰 罗光杰 谭科军 李贵川 吴国忠 彭黔荣 |
| |
| 作者单位： | 1. 贵州中烟工业有限责任公司贵阳卷烟厂工艺质量管理科2. 贵州中烟工业有限责任公司贵阳卷烟厂 |
| |
| 基金项目： | 贵州省科学技术基金项目“功能化离子液的固载化及清洁催化应用”（黔科合J字[2008]2022）. |
| |
| 摘 要： | 通过对传统切丝、30 mm异型切丝与40 mm异型切丝烟丝结构的研究，分析了不同切丝模式在不同加工环节下烟丝结构的变化以及不同切丝模式对卷烟质量的影响。结果表明：（1）在烘丝与贮丝环节，与传统切丝相比，40 mm异形切丝的整丝率和中丝率基本不变，而30 mm异形切丝的整丝率有所下降，中丝率有所上升；（2）在卷烟端部落丝量方面，与传统切丝和30 mm异形切丝相比，40 mm异形切丝的平均端部落丝量有所降低，且切出烟丝的卷烟端部落丝量的合格率较高；（3）与传统切丝相比，40 mm异形切丝的单支质量标准偏差降低了9%；在吸阻和圆周的控制上，40 mm和30 mm异形切丝的标准偏差也有所降低；总体看来40 mm异形切丝提升了卷烟物理质量的稳定性。
|
| 关 键 词： | 丝黑穗病 丝黑穗病 |
| 收稿时间： | 2013/5/23 0:00:00 |
| 修稿时间： | 2013/6/30 0:00:00 |
Effects of Different Cutting Mode on Cut Tobacco Structure and Physical Index of Cigarette |
| |
| Han Huijie,Luo Guangjie,Tan Kejun,-Li Guichuan,Wu Guozhong,Peng Qianrong.Effects of Different Cutting Mode on Cut Tobacco Structure and Physical Index of Cigarette[J].Chinese Agricultural Science Bulletin,2014,30(6):302-305. |
| |
| Authors: | Han Huijie Luo Guangjie Tan Kejun -Li Guichuan Wu Guozhong Peng Qianrong |
| |
| Institution: | (Guiyang Cigarette Factory, China Tobacco Guizhou Industrial Co. Ltd., Guiyang 550009) |
| |
| Abstract: | Study on the cut tobacco structure of traditional cutting, 30mm fixed-length cutting and 40mm fixed-length cutting, the changes of cut tobacco structure at the different sample points and the cigarette-making quality on different cutting mode were investigated. The results showed that: 1) comparing with traditional cutting, the whole cut rate and middle strands of 40mm fixed-length cutting were unchanged , while the whole cut rate of 30mm fixed-length cutting was decreased and middle strands was increased during the link of cut tobacco drying and cut-tobacco storage; 2) comparing with traditional cutting and 30mm fixed-length cutting, the average of loss of cigarette of 40mm fixed-length cutting reduced to a certain degree. Moreover, the qualification rate of loss of tobacco from the ends was higher; 3) comparing with traditional cutting, the standard deviation of individual cigarette weight of 40mm fixed-length cutting reduced by 9%,and the standard deviations of draw resistance and circumference also reduced to a certain degree. Conclusively, 40mm fixed-length cutting significantly increased the stability of physical quality of cigarette. |
| |
| Keywords: | physical index of cigarette |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《中国农学通报》浏览原始摘要信息 |
| 点击此处可从《中国农学通报》下载免费的PDF全文 |
|
