| 山核桃坚果有限元模型建立及受力分析 |
| |
| 引用本文： | 丁正耀,朱德泉,钱良存,洪翎,张念生.山核桃坚果有限元模型建立及受力分析[J].农业装备与车辆工程,2010(6):6-9,12. |
| |
| 作者姓名： | 丁正耀 朱德泉 钱良存 洪翎 张念生 |
| |
| 作者单位： | 1. 安徽农业大学工学院,安徽,合肥,230036
2. 安徽农业大学理学院,安徽,合肥,230036 |
| |
| 基金项目： | 安徽省高校省级科研项目 |
| |
| 摘 要： | 针对山核桃果壳完全破裂所需的变形量大于壳仁间隙,用一般的机械挤压方法破壳会造成大量碎仁等问题,利用Pro/E软件建立了山核桃的几何模型,采用有限元分析方法构建了山核桃破壳受力模型,并对山核桃进行了受力模拟与分析。根据不同受力方向和不同载荷下山核桃的应力应变分布情况,确定山核桃壳变形量不大且产生局部裂纹点多、裂纹点易扩展的最佳施力方式,为山核桃破壳取仁设备的研制提供依据。
|
| 关 键 词： | 山核桃 几何模型 有限元分析 受力分析 |
Finite Element Modeling and Mechanical Analysis of Hickory Kernel |
| |
| DING Zheng-yao,ZHU De-quan,QIAN Liang-cun,HONG Ling,ZHANG Nian-sheng.Finite Element Modeling and Mechanical Analysis of Hickory Kernel[J].Agricultural Equipment & Vehicle Engineering,2010(6):6-9,12. |
| |
| Authors: | DING Zheng-yao ZHU De-quan QIAN Liang-cun HONG Ling ZHANG Nian-sheng |
| |
| Institution: | DING Zheng-yao1,ZHU De-quan1,QIAN Liang-cun2,HONG Ling1,ZHANG Nian-sheng1(1.College of Engineering,Anhui Agricultural University,Hefei 230036,China,2. School of Sciences,China) |
| |
| Abstract: | Large amounts of broken kernels are caused by mechanical extruding, because deformation needed is larger than its gap of hull and kernel during the rupture process. In the paper, geometric model of hickory was established by Pro/E software and the breaking force model was constructed based on the FEM to realize force simulation and analysis. According to analysis of different conditions of stress and strain distribution of hickory, the deformation gap of the hickory shell and the best way of application of ... |
| |
| Keywords: | hickory geometry model finite element analysis mechanical analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
