| 酚醛胶亚麻屑刨花板生产工艺及其耐老化性能的研究 |
| |
| 引用本文： | 濮安彬,陆仁书.酚醛胶亚麻屑刨花板生产工艺及其耐老化性能的研究[J].木材工业,1996,10(1):6-10,21. |
| |
| 作者姓名： | 濮安彬 陆仁书 |
| |
| 作者单位： | 东北林业大学 |
| |
| 摘 要： | 本文主要研究酚醛胶亚縻屑刨花板的生产工艺及其而加速老化性能。研究中采用正交设计安排试验，并对试验结果进行方差分析，最后通过分析，得出酚醛胶亚縻屑刨花板的生产工艺和利用该工艺生产的的板的耐加速老化性能结果。研究结果表明：密度为０．７５ｇ／ｃｍ＾３的酚醛胶亚麻屑刨花板性能不仅达到了德国室外用建筑刨花板标准ＤＩＮ６８７６３Ｖ１００型的要求，而且按美国ＡＳＴＭＤ１０３７加速老化标准检验，其静曲强度老化剩余
|
| 关 键 词： | 酚醛胶 亚麻屑 刨花板 耐老化性能 工艺 |
Sudy on Manufacturing Techniqu and Acc6lerated Ageing Behavior of Phenolic Resin-bonded Flaxboard |
| |
| Pu Anbin,Lu Renshu,Shen Yaowen.Sudy on Manufacturing Techniqu and Acc6lerated Ageing Behavior of Phenolic Resin-bonded Flaxboard[J].China Wood Industry,1996,10(1):6-10,21. |
| |
| Authors: | Pu Anbin Lu Renshu Shen Yaowen |
| |
| Abstract: | This study mainly focused on manufacturing technique and accelerated ageingproperties of phenolic resin-bonded flaxboard.Orthogonal design and variance analysis wereused.Through comprehensive analysis,board manufacturing technique and test results ofaccelerated ageing properties of the board were obtained.The results showed:when densityof the board is 0.75g/cm3,board's properties can meet the German Standard DIN 68763V100 and surplus ratio of this board's MOR is more than 50?cording to ASTM D 1037(6-cycle accelerated ageing standard). |
| |
| Keywords: | Phenolic resin adliesive Flaxboard Manufacturing technique Accelerated age-ing properties |
| 本文献已被 CNKI 维普 等数据库收录！ |
