| 基于CH376S的激光切割机床加工程序传输模块设计 |
| |
| 引用本文： | 李娜,李英治,贺晓东.基于CH376S的激光切割机床加工程序传输模块设计[J].农业装备与车辆工程,2013(11):68-70. |
| |
| 作者姓名： | 李娜 李英治 贺晓东 |
| |
| 作者单位： | 山东省农业机械科学研究所,山东省济南市250100 |
| |
| 摘 要： | 针对目前激光切割机床的加工程序的传输方式的缺点，设计了一种新型的激光切割机加工程序传输模块。它能够实现激光切割机床控制器C805117020单片机通过CH376S芯片读取U盘中加工程序信息．根据读取的加工参数自动执行数控指令，实现板材切割。系统以CH376S为数据传输芯片。搭建了C8051F020单片机读写U盘中加工程序信息的硬件平台，并完成程序设计，经过调试运行，实现加工程序数据高效快速传输。
|
| 关 键 词： | 激光切割机床 加工程序传输模 C8051F020 CH376S |
Design of Machining Program Transmission Module for Laser Cutting Machine Based on CH376S |
| |
| Li Na,Li Yingzhi,He Xiaodong.Design of Machining Program Transmission Module for Laser Cutting Machine Based on CH376S[J].Agricultural Equipment & Vehicle Engineering,2013(11):68-70. |
| |
| Authors: | Li Na Li Yingzhi He Xiaodong |
| |
| Institution: | (Shandong Agricultural Machinery Research Institute, Jinan City, Shandong Province 250100,China) |
| |
| Abstract: | For the faults of machining program transmission for laser cutting machine at present, a new machining program transmission module for laser cutting machine is designed. It can achieve that C8051F020, the laser cutting machine controller, extracts machining program information in U disk by CH376S chip, and can automatically cut plank stuff according to processing parameters from U disk. The system, whose core is CH376S, builds the hardware of C8051F020 to read machining program from U disk, writes software for transmission module, can transfer machining program data fast and efficiently after debugging and running. |
| |
| Keywords: | laser cutting machine machining program transmission module C8051F020 CH376S |
| 本文献已被 维普 等数据库收录！ |
