Effect of selected metrological parameters of dyed polyester textiles on their UV-barrier properties |
| |
| Authors: | Krysiak Krzysztof Lipp-Symonowicz Barbara |
| |
| Institution: | 1. Institute of Leather Industry, Lodz, 91-462, Poland
2. Department of Material Technologies and Textile Design, Technical University of Lodz, Lodz, 90-924, Poland
|
| |
| Abstract: | This paper presents the results of studies on the effect of some metrological parameters of polyester textiles dyed with a disperse dye, C. I. Disperse Red 54, on the level of their UV-barrier properties. It has been found that the UV-barrier properties of textiles not always depend on fabric parameters such as thickness and tightness/porosity as suggested by many research works. The parameters mentioned above, due to their interaction with a dye applied (that absorbs UV radiation), one may treat as indirect factors. It is the surface weight of a fabric that seems to be the direct factor and the most important metrological parameter in this regard. This is indicated by spectrophotometric measurements of dyed fabrics of different surface weights. Higher values of this parameter result in higher levels of UV-barrier properties. Increase in the barrier properties with increasing dyeing percentage is also higher for fabrics with greater surface weights. To confirm this fact, we presented in this paper a physical-mathematical model accepted for a dyed woven fabric, treated as an optical filter containing a dye. The model is based on Lambert-Beer’s law. The dye plays the part of a UV radiation absorber, occurring in the fiber material in the state of monomolecular dispersion (a solid solution). |
| |
| Keywords: | |
| 本文献已被 SpringerLink 等数据库收录！ |
|
