| 基于SolidWorks的残膜捡拾滚简3D设计及运动仿真 |
| |
| 引用本文： | 王学农,陈发,张佳喜,蒋永新,牛长河.基于SolidWorks的残膜捡拾滚简3D设计及运动仿真[J].农机化研究,2007(4):47-48,83. |
| |
| 作者姓名： | 王学农 陈发 张佳喜 蒋永新 牛长河 |
| |
| 作者单位： | 新疆农业科学院农业机械化研究所,乌鲁木齐830091 |
| |
| 基金项目： | 国家自然科学基金项目（50375131） |
| |
| 摘 要： | 应用SolidWorks软件对残膜捡拾滚筒进行3D设计和装配，并运用COMSOS／Motion在滚筒不同的转速、捡拾齿组数及人土深度等参数下对滚筒进行了运动仿真，得出捡膜齿运动轨迹，初步寻找出了弧型捡膜齿满足要求的排列布置、滚筒转速和合理的人土深度等工作参数，为残膜回收机具的设计提供了理论依据。
|
| 关 键 词： | 农业工程 残膜捡拾滚筒 理论研究 运动仿真 3D SolidWorks |
| 文章编号： | 1003-188X（2007）04-0047-02 |
| 收稿时间： | 2006-06-19 |
| 修稿时间： | 2006-06-19 |
Three-dimensional Design and Motion Simulating on Tooth Roller for Collecting Plastic Residue Based on the Software of Solidworks |
| |
| WANG Xue-nong, CHEN Fa, ZHANG Jia-xi, JIANG Yong-xin, NIU Chang-he Agricultural Mechanization Research Institute, Xinjiang Academy of Agricultural Sciences, Urumqi , China.Three-dimensional Design and Motion Simulating on Tooth Roller for Collecting Plastic Residue Based on the Software of Solidworks[J].Journal of Agricultural Mechanization Research,2007(4):47-48,83. |
| |
| Authors: | WANG Xue-nong CHEN Fa ZHANG Jia-xi JIANG Yong-xin NIU Chang-he Agricultural Mechanization Research Institute Xinjiang Academy of Agricultural Sciences Urumqi China |
| |
| Institution: | WANG Xue-nong, CHEN Fa, ZHANG Jia-xi, JIANG Yong-xin, NIU Chang-he Agricultural Mechanization Research Institute, Xinjiang Academy of Agricultural Sciences, Urumqi 830091, China) |
| |
| Abstract: | Roller for collecting plastic residue is designed and assembled by using the 3D design software of Solidworks. The motion of the collecting tooth is simulated based on COSMOS/motion. Arrangement of tooth and rotate speed of the roller and right depth in the dust are found. Theory proof is provided for designing the roller. |
| |
| Keywords: | agricultural engineering roller for collecting plastic residue theoretical research motion simulation three dimension SolidWorks |
| 本文献已被 维普 等数据库收录！ |
