| 吸盘式精密播种装置气力吸种部件流场仿真分析 |
| |
| 引用本文： | 刘彩玲,宋建农,王继承,王冲.吸盘式精密播种装置气力吸种部件流场仿真分析[J].中国农业大学学报,2010,15(1):116-120. |
| |
| 作者姓名： | 刘彩玲 宋建农 王继承 王冲 |
| |
| 作者单位： | 中国农业大学,工学院,北京,100083 |
| |
| 基金项目： | 国家“十一五”科技支撑项目(2006BDA28B00-05) |
| |
| 摘 要： | 以吸盘式精密播种装置为研究对象,应用CFD技术数值模拟吸种盘不同吸孔直径、气源真空度和气吸室形状下气力吸种部件内气流的压力场,并进行试验验证。仿真结果表明:较大的吸孔直径可提高吸种能力,但气吸室内压力呈不均匀分布趋势,影响吸种性能;较大的气源真空度有利于提高吸种能力,且不影响气吸室流场的均匀分布;气吸室形状对吸种能力和吸种均匀性均不造成影响。试验分析与仿真分析结果一致。对于自制吸盘式精密播种装置,播种水稻种子时吸种盘上吸孔孔径2.0 mm左右、真空度为6.7~15.0 kPa时具有较好的吸种效果。
|
| 关 键 词： | 吸盘 精密播种装置 气力吸种部件 CFD |
| 收稿时间： | 2009/4/9 0:00:00 |
Analysis of flow field simulation on vacuum seed-metering components of precision metering device with sucker |
| |
| LIU Cai-ling,SONG Jian-nong,WANG Ji-cheng and WANG Chong.Analysis of flow field simulation on vacuum seed-metering components of precision metering device with sucker[J].Journal of China Agricultural University,2010,15(1):116-120. |
| |
| Authors: | LIU Cai-ling SONG Jian-nong WANG Ji-cheng and WANG Chong |
| |
| Institution: | College of Engineering/a>;China Agricultural University/a>;Beijing 100083/a>;China |
| |
| Abstract: | The study object was precision metering device with sucker and the pressure field of vacuum seed-metering components was simulated under the different nozzle diameters of the sucker and the vacuum-pressures from different gas sources and the chamber shapes by CFD technique.The simulation results were verified by the experiments and showed that the larger pickup hole diameter could improve the vacuum ability,but it might cause an uneven pressure distribution in chamber and weakened the performance of seeds p... |
| |
| Keywords: | sucker precision metering device vacuum seed-metering components CFD |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《中国农业大学学报》浏览原始摘要信息 |
| 点击此处可从《中国农业大学学报》下载免费的PDF全文 |
