| 旋切过程中单板厚度变化的理论研究 |
| |
| 引用本文： | 陈桂华.旋切过程中单板厚度变化的理论研究[J].林业机械与木工设备,2002,30(3):10-12. |
| |
| 作者姓名： | 陈桂华 |
| |
| 作者单位： | 中南林学院工业学院,湖南,株洲,412006 |
| |
| 摘 要： | 从理论上探讨了旋切过程中单板厚度的变化规律。结果表明：单板厚度总是小于或等于单板名义厚度，其变化与装刀高度，名义厚度及木段瞬时半径有关。
|
| 关 键 词： | 单板 厚度 旋切 装刀高度 胶合板 工艺 理论 |
| 文章编号： | 1001-4462(2002)03-0010-03 |
| 修稿时间： | 2001年10月31 |
Theoretical Research on Variation of Veneer Thickness in Rotary-cutting |
| |
| CHEN Gui-hua.Theoretical Research on Variation of Veneer Thickness in Rotary-cutting[J].Forestry Machinery & Woodworking Equipment,2002,30(3):10-12. |
| |
| Authors: | CHEN Gui-hua |
| |
| Abstract: | In this paper variation of veneer thickness in rotary-cutting had been researched by theory. The result showed that veneer thickness is always less than or equal to veneer nominal thickness, and variation of veneer thick- ness is influenced by knife height, veneer nominal thickness and instantaneity radius of the log. |
| |
| Keywords: | veneer thickness rotary-cutting knife height |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
