首页 | 本学科首页   官方微博 | 高级检索  
     检索      

车辆覆盖件冲压成形的回弹模拟研究
引用本文:杨征宇,常思勤.车辆覆盖件冲压成形的回弹模拟研究[J].拖拉机与农用运输车,2007,34(6):81-83.
作者姓名:杨征宇  常思勤
作者单位:1. 南京理工大学,交通与车辆工程系,南京,210094;南京工程学院,先进数控技术江苏省高校重点实验室,南京,211167
2. 南京理工大学,交通与车辆工程系,南京,210094
摘    要:回弹现象是车辆覆盖件冲压成形中不可避免的问题,也是该领域研究的热点和难点问题。本文在对轿车行李箱外板冲压成形数值模拟的基础上,基于隐式算法对行李箱外板的回弹进行了计算研究,确定了回弹的分布及最大回弹量的位置,研究了影响回弹的因素和减小回弹量的控制方法,为车辆覆盖件冲压成形加工工艺优化提供了基本思路。

关 键 词:车辆覆盖件  冲压成形  回弹  模拟
文章编号:1006-0006(2007)06-0081-03
收稿时间:2007-01-19
修稿时间:2007年1月19日

Study on Numerical Simulation of Springback in Automobile Panels Forming
YANG Zheng-yu,CHANG Si-qin.Study on Numerical Simulation of Springback in Automobile Panels Forming[J].Tractor & Farm Transporter,2007,34(6):81-83.
Authors:YANG Zheng-yu  CHANG Si-qin
Abstract:Springback is an inevitable problem in sheet metal stamping forming,and is the research hotspot and difficulty in this field.Starting from the stamping forming result of deck lid,simulation and research on the springback of deck lid was carried out based on the implicit algorithm,the springback distribution and the biggest displacement position was determined.Correlative factors affect the springback and measures taken to reduce the springback are discussed,and it provides a thought of process-optimization for forming of automobile panels.
Keywords:Automobile panels  Stamping forming  Springback  Numerical simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号