| 开槽圆锯片热变形的试验研究 |
| |
| 引用本文： | 赵二东,李黎,严雄林.开槽圆锯片热变形的试验研究[J].木材工业,2004,18(6):25-27,31. |
| |
| 作者姓名： | 赵二东 李黎 严雄林 |
| |
| 作者单位： | 北京林业大学材料科学与技术学院,北京,100083 |
| |
| 基金项目： | 北京林业大学研究生培养基金资助项目。 |
| |
| 摘 要： | 本文研究了圆锯片径向槽的数量、长度、宽度对圆锯片热变形的影响。试验结果发现，三者对圆锯片的热变形均有较大的影响：当开5个径向槽时圆锯片的热变形最小；相同条件下，径向槽相对较长的锯片不易发生热变形；径向槽宽度的增加可引起锯片热变形的加剧。
|
| 关 键 词： | 圆锯片 径向槽 热变形 |
| 文章编号： | 1001-8654(2004)06-0025-03 |
Thermal Deformation of a Circular Sawblade with Slots |
| |
| ZHAO Er-dong,LI Li,YAN Xiong-lin.Thermal Deformation of a Circular Sawblade with Slots[J].China Wood Industry,2004,18(6):25-27,31. |
| |
| Authors: | ZHAO Er-dong LI Li YAN Xiong-lin |
| |
| Abstract: | The effects of the number, length and width of the slots on the thermal deformation of a circular sawblade were investigated in this paper. Results found that under the same condition, a circular sawblade with 5 slots showed the best thermal stability. It was also found that increasing the length of the slots tended to make the sawblade more stable, whereas increasing the width of slots resulted in increased thermal deformation. |
| |
| Keywords: | Circular sawblade Slot Thermal deformation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
