| 木材加工中心水平刨(刀轴)系统动静态特性研究 |
| |
| 引用本文： | 赵莉莉,齐博.木材加工中心水平刨(刀轴)系统动静态特性研究[J].林产工业,2019,46(4):39-42. |
| |
| 作者姓名： | 赵莉莉 齐博 |
| |
| 作者单位： | 南兴装备股份有限公司,东莞,523990;华南理工大学,广州,510641 |
| |
| 基金项目： | 东莞市科技局;东莞市科技局 |
| |
| 摘 要： | 水平刨(刀轴)系统是木材加工中心的重要部件,其动态特性对加工工件的表面质量和加工误差影响很大。为获得水平刨(刀轴)系统的静动态特性指标,建立水平刨(刀轴)系统动力学数学模型,对其振动原理进行阐述;通过三维建模,借助于ANSYS软件对水平刨(刀轴)系统进行静力学分析、约束模态分析和谐响应分析,依据仿真结果对水平(刀轴)刨(刀轴)系统设计的合理性进行验证。所得研究成果可为类似问题的分析提供参考,故本研究具有一定的工程应用价值。
|
| 关 键 词： | 木材加工中心 水平刨(刀轴)系统 静态特性 动态特性 |
Static and Dynamic Characteristics Analysis of Horizontal Planing(Cutter Shaft) System of Wood Machining Center |
| |
| ZHAO Li-li,QI Bo.Static and Dynamic Characteristics Analysis of Horizontal Planing(Cutter Shaft) System of Wood Machining Center[J].China Forest Products Industry,2019,46(4):39-42. |
| |
| Authors: | ZHAO Li-li QI Bo |
| |
| Institution: | (Nanxing Equipment Company Limited, Dongguan 523990,China;South China University of Technology, Guangzhou 510641,China) |
| |
| Abstract: | The horizontal planing (cutter shaft) system is an important part of the wood machining center. The dynamic characteristics of the horizontal planing (cutter shaft) system have a great influence on the surface quality and machining error of the machined workpiece. In order to obtain the static and dynamic characteristics of the horizontal planing (cutter shaft) system, a mathematical model of the horizontal planing (cutter shaft) system dynamics is established to explain the vibration principle of the horizontal planing (cutter shaft) system. Through the threedimensional modeling, the static analysis of the horizontal planing (cutter shaft) system and the harmonious response analysis of the constrained modal analysis are carried out by means of ANSYS software. The rationality of the horizontal planing (cutter shaft) system design is verified according to the simulation results. The obtained research results can provide reference for the analysis of similar problems, so this research has certain engineering application value. |
| |
| Keywords: | Wood machining center Horizontal planing (cutter shaft) system Static characteristic Dynamic characteristic |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
