| 基于Proe5．0与Ansys—Workbench板材起重运输三工位上料机机架主梁的有限元分析 |
| |
| 引用本文： | 战丽,董路平,林伟芬,谭朝霞.基于Proe5．0与Ansys—Workbench板材起重运输三工位上料机机架主梁的有限元分析[J].林业机械与木工设备,2012(12):40-43. |
| |
| 作者姓名： | 战丽 董路平 林伟芬 谭朝霞 |
| |
| 作者单位： | 东北林业大学 |
| |
| 基金项目： | 林业公益性行业科研专项(201004007);国家“948”创新项目(2010-4-24) |
| |
| 摘 要： | 使用板材三工位起重运输上料机将大大节省送料周期，提高自动化程度，使板材输送线布置更加合理。在三工位上料机机架受力分析的基础上，利用Proe5．0软件建立了相关的三维模型，并针对其结构强度的相关计算，提出利用Ansys—Workbench软件对上料机机架主梁进行相关校核。
|
| 关 键 词： | 三工位上料机 主梁 有限元分析 |
Finite Element Analysis of the Main Beam of Three-position Plate Lifting Transporting and Feeding Equipment Based on Proe5.0 and Ansys-Workbench |
| |
| ZHAN Li,DONG Lu-ping,LIN Wei-fen,TAN Zhao-xia.Finite Element Analysis of the Main Beam of Three-position Plate Lifting Transporting and Feeding Equipment Based on Proe5.0 and Ansys-Workbench[J].Forestry Machinery & Woodworking Equipment,2012(12):40-43. |
| |
| Authors: | ZHAN Li DONG Lu-ping LIN Wei-fen TAN Zhao-xia |
| |
| Institution: | (Northeast Forestry University,Harbin Heilongjiang 150040,China) |
| |
| Abstract: | Three-position plate lifting, transporting and feeding equipment can greatly save the feeding cycle, increase the automation degree and make the plate conveying route layout more rational. Based on the force applied on the frame of the three-position feeder, Proe5.0 software is used to establish a relevant three-dimensional model and based on relevant calculation of its structural strength, it is proposed that Ansys -Workbench software be used to conduct relevant check |
| |
| Keywords: | three-position feeder main beam finite element analysis |
| 本文献已被 CNKI 维普 等数据库收录！ |
