|
|||||
|
|
Assessment of tillage erosion by mouldboard plough in Tuscany (Italy) |
|
| Authors: | S De Alba L Borselli D Torri S Pellegrini P Bazzoffi |
| Institution: | aUCM – Universidad Complutense de Madrid, Facultad de Geología, Dpto. de Geodinámica, Ciudad Universitaria s/n, 28040 Madrid, Spain bCNR-IRPI – Istituto di Ricerca per la Protezione Idrogeologica, Piazzale delle Cascine 15, 50144 Firenze, Italy cISSDS – Istituto Sperimentale per lo Studio e la Difesa del Suolo, Piazza D’Azeglio 30, 50121 Firenze, Italy |
| Abstract: | This study was designed to characterise the soil translocation effect induced by mouldboard ploughing with an implement traditionally used in the Tuscany region (Central Italy). We discuss the results of a set of field experiments performed to measure soil displacement along slopes of varying gradient in different directions and at several depths of tillage. Using the Soil Erosion by Tillage (SETi) model, soil translocation patterns for different tillage scenarios were analysed, with special attention paid to the effects of the direction and depth of tillage on the extent and spatial pattern of soil movement. The lateral slope gradient SP and tillage depth D were found to be the dominant controlling factors for total soil displacement. The effect of the slope gradient in a direction parallel to tillage ST was much less pronounced. These findings reveal the importance of the asymmetric nature of the soil movement produced by mouldboard ploughing and the predominant effect of the lateral displacement dP on the actual trajectory of soil motion. Results demonstrate that spatial patterns of soil redistribution due to mouldboard ploughing are highly variable and depend on the particular characteristics of the implement used. This dependence is so strong that maximum downslope soil translocation can occur during both, contour tillage or up–down tillage. For this particular mouldboard plough, maximum downslope soil transport took place at a tillage direction ca. 70° and not when tillage was conducted along the steepest slope direction (0°). These findings highlight the potential of the combined approach applied. The physically based SETi model can be properly calibrated using a relatively limited dataset from field experiments. Once calibrating, the SETi model can then be used to generate synthetic tillage translocation relationships, which can predict the intensity and spatial pattern of soil translocation over a much wider range of tillage scenarios than the particular experimental conditions, in terms of topography complexity (slope gradients and morphology) and the direction and depth of tillage. These synthetic relationships are useful tools for evaluating strategies designed to reduce tillage erosion. |
| Keywords: | Tillage erosion Tillage translocation SETi model Field experiments Modelling Metal tracers Electromagnetic probe |
| 本文献已被 ScienceDirect 等数据库收录！ | |