|
|||||
|
|
| 振动式蓝莓采摘的机理分析与仿真 | |
| 引用本文： | 王海滨,郭艳玲,鲍玉冬,耿 雷.振动式蓝莓采摘的机理分析与仿真[J].农业工程学报,2013,29(12):40-46. |
| 作者姓名： | 王海滨 郭艳玲 鲍玉冬 耿 雷 |
| 作者单位： | 1. 东北林业大学工程技术学院,哈尔滨,150040 2. 东北林业大学机电工程学院,哈尔滨,150040 3. 黑龙江科技学院机械工程学院,哈尔滨,150027 |
| 基金项目： | 国家林业局948项目（2011-4-21）；东北林业大学中央高校基金项目（DL12AB04） |
| 摘 要： | 为改变中国蓝莓人工采摘状况，实现高丛蓝莓的机械化采摘，该文研究了高丛蓝莓的采摘机理，并对所建立的数学模型进行仿真分析。首先分析蓝莓振动采摘机理，建立蓝莓植株采摘物理模型，推导得出动力学方程，采用数学物理微分方程求解得到蓝莓树枝稳态受迫振动输出解及采摘惯性力。运用MATLAB软件仿真分析蓝莓树枝稳态受迫振动时域仿真曲线及采摘力幅频特性仿真曲线，并进行了蓝莓采摘试验，试验数据与仿真结果一致：仿真结果满足蓝莓采摘条件的采摘频率为14～16rad/s，较优的采摘频率为15rad/s，该频率下的采摘效率为913颗/min，采摘生果率为2.99%，采摘果实损坏率为2.86%，未采净率为3.17%，机采人采效率比为10.14。研究结果可为高丛蓝莓采摘机的研制提供参考。 |
| 关 键 词： | 农业机械 振动 角速度 高丛蓝莓 机械化采摘 |
| 收稿时间： | 2012/10/1 0:00:00 |
| 修稿时间： | 2013/5/28 0:00:00 |
Mechanism analysis and simulation of blueberry harvest by vibration mode |
|
| Wang Haibin,Guo Yanling,Bao Yudong and Gen Lei.Mechanism analysis and simulation of blueberry harvest by vibration mode[J].Transactions of the Chinese Society of Agricultural Engineering,2013,29(12):40-46. | |
| Authors: | Wang Haibin Guo Yanling Bao Yudong and Gen Lei |
| Abstract: | Abstract: Recently, the blueberry was served as the king of fruits, and people have been paying more attention to the health care effect, economic and medicinal value of the blueberry. Planting the blueberry is a new economic growth point in agriculture and forestry. The demand for blueberry exceeds the supply in the international market with high-speed growth demand. However, the blueberries are harvested depending entirely on hand picking in China with serious losses, and the picking cost accounts for 50%?70% of the total blueberry production cost. The old harvesting method restricts the widespread popularization and planting of blueberries. Research on blueberry picking machines and blueberry picking mechanisms is in its infancy in China. The price of blueberry picking machines is high. An experiment was conducted to change the artificial harvesting status of the blueberry, realize the mechanization of a high-bush blueberry-picking tool, and establish the theoretical guidance and design basis for the blueberry-picking machine for Chinese national conditions. We studied the vibration mechanism of the high-bush blueberry in picking and identified the picking frequency by simulation analysis and the experimental verification. First, we analyzed the working principle of the picking machine to get the vibration picking mechanism. The blueberry plants' geometry model was simplified and analyzed to get the blueberry plants physical model and the mathematical model, which was solved by a partial differential equation solution. We then obtained the forced vibration response of the blueberry plants and the forced vibration picking inertia force at steady state of the blueberry fruit. Second, ten strains of blueberry trees were selected as the test samples. We measured the binding force and mechanical parameters of the blueberry plants, such as the diameter, length, density, elastic modulus, fruit, and tree growth parameters. The vibration shape of the fruit branches and the inertia force of the fruit were simulated by using MATLAB software simulation, and the blueberry picking frequency at vibration condition was 14-16 rad/s. Finally, using an experimental self-developed blueberry picking machine at Xinkang blueberry planting area, in Wulongbei, Zhen'an District, Dandong City, Liaoning Province, the vibration shape of the fruit branches was observed and the fruit distribution before and after picking was compared. The results show that: there are fewer errors between the actual vibration response and the simulation results, but the overall vibration shape of blueberry branches, the vibration response, and picking effects are consistent with the simulation results. In addition, the effect of frequency on blueberry picking was analyzed by the experiment. The number of the mature fruit, ripe fruit, damaged fruit and the fruit left on the branch under different picking frequency were recorded. Then, the picking fruit rate, the fruit damage rate and the left fruit rate were calculated. The reasonable picking frequency is 15 rad/s, and the quality evaluation indexes at this frequency are as follows: the picking efficiency is 913 pieces/min, the picking ripe fruit rate is 2.99%, the damage fruit rate was 2.86%, the leaving rate is 3.17%, and the ratio of machine to worker is 10.14. |
| Keywords: | agricultural machinery vibrations angular velocity high-bush blueberry mechanization picking |
| 本文献已被 万方数据 等数据库收录！ | |
| 点击此处可从《农业工程学报》浏览原始摘要信息 | |
| 点击此处可从《农业工程学报》下载免费的PDF全文 | |