| 小型甘蔗收获机一种台架机构的建模与仿真分析 |
| |
| 引用本文： | 蒋礼斌,李尚平,杜俊鹏,陈伟叙.小型甘蔗收获机一种台架机构的建模与仿真分析[J].中国农机化,2006(2):76-79. |
| |
| 作者姓名： | 蒋礼斌 李尚平 杜俊鹏 陈伟叙 |
| |
| 作者单位： | 广西大学机械工程学院 |
| |
| 基金项目： | 国家自然科学基金(编号50365001)基金项目，广西壮族自治区科技攻关项目(编号0235008-5) |
| |
| 摘 要： | 在开发小型甘蔗收获机的过程中,本文利用Pro/E建立了一种台架机构的虚拟模型,此台架采用平行四边形的提升机构和独立刀架,导入机械系统动力学仿真软件ADAMS后,对其进行了仿真,分析其可行性和实用性,并在ANSYS中建立了砍蔗刀片的有限元模型,对刀片进行了结构静力学分析,为后续研究提供了一些有用的设计参数。
|
| 关 键 词： | 甘蔗收获机 台架机构 ADAMS ANSYS 仿真 |
| 文章编号： | 1006-7205（2006）02-0076-03 |
| 收稿时间： | 2005-09-29 |
| 修稿时间： | 2005年9月29日 |
Modeling Simulation and Analysis of a Kind of Taijia Parts of a Small_scale Sugar Cane Harvester |
| |
| JIANG Li-bin,LI Shang-ping,DU Jun-peng,CHEN Wei-xu.Modeling Simulation and Analysis of a Kind of Taijia Parts of a Small_scale Sugar Cane Harvester[J].Chinese Agricul Tural Mechanization,2006(2):76-79. |
| |
| Authors: | JIANG Li-bin LI Shang-ping DU Jun-peng CHEN Wei-xu |
| |
| Institution: | Guangxi University, Nanning, 530004, China |
| |
| Abstract: | In this article, during the researching work of a small_scale sugar cane harvester, a virtual model of a kind of taijia parts is built. It uses parallelogram lifting structure and an independent daojia. Having been transported into ADAMS, simulating software about mechanical system dynamics, the whole model has been simulated. The feasibility and practicability of this kind of taijia are analysed. A finite element model of the cutter is built in ANSYS, and its structure statics analysis has been done. Some parameters which are very useful to the coming research work are gotten. |
| |
| Keywords: | sugar cane harvester taijia structure ADAMS ANSYS simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
