首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于蚁群算法的茶叶理条机参数优化设计
引用本文:李 兵,夏 涛,李尚庆.基于蚁群算法的茶叶理条机参数优化设计[J].农业工程学报,2011,27(10):79-82.
作者姓名:李 兵  夏 涛  李尚庆
作者单位:1. 安徽农业大学工学院,合肥,230036
2. 安徽农业大学茶与食品科技学院,合肥,230036
基金项目:国家科技支撑计划(2006BAK02A26);安徽省人才开发资金项目资助
摘    要:为了提高茶叶理条机的传动性能与茶叶加工质量,运用蚁群算法和Matlab语言,建立了茶叶理条机优化设计数学模型,编制了茶叶理条机的关键设计参数的优化设计程序,并运用该程序对茶叶理条机的关键参数进行了优化仿真计算并进行了验证试验.优化结果表明:曲柄长度为59.1 mm;连杆长度为341.5 mm;偏心距为57.5 mm;滑...

关 键 词:参数评估  优化  设计  茶叶理条机  蚁群算法
收稿时间:1/9/2011 12:00:00 AM
修稿时间:3/4/2011 12:00:00 AM

Optimization design of tea carding machine parameters based on ant colony algorithm
Li Bing,Xia Tao and Li Shangqing.Optimization design of tea carding machine parameters based on ant colony algorithm[J].Transactions of the Chinese Society of Agricultural Engineering,2011,27(10):79-82.
Authors:Li Bing  Xia Tao and Li Shangqing
Abstract:To improve driving performance and tea processing quality of tea carding machine, mathematical mode for tea carding machine optimum design was established in this paper. Based on the ant colony algorithms and Matlab, the realization programs regarding parameters simulation of tea carding machine were made. The programs were used in optimization simulation of the key transmission parameters. The optimization results and proving trial showed: when crank length was 59.1 mm, connecting rod length was 341.5 mm, eccentricity was 57.5 mm, slider stroke was 120 mm, auxiliary angle was 8.26°, angle between the two limiting positions was 3.5°, minimum transmission angle should changed from 50° to 70.1°, the noise decreased 5dB, and stripping tea rate increased 6%. The research can provide theoretical basis for improving the tea carding machine.
Keywords:parameter estimation  optimization  design  tea carding machine  ant colony algorithm
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《农业工程学报》浏览原始摘要信息
点击此处可从《农业工程学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号