首页 | 本学科首页   官方微博 | 高级检索  
     检索      

微发泡木塑复合材料耐腐性能的研究
引用本文:朱远,姜志宏.微发泡木塑复合材料耐腐性能的研究[J].浙江林业科技,2012,32(2):29-32.
作者姓名:朱远  姜志宏
作者单位:浙江农林大学工程学院,浙江临安,311300
摘    要:研究了5种不同木塑比的木塑复合材料的天然耐腐性能。结果表明:①木塑复合材料的天然耐腐性能为强耐腐等级,受菌侵染后质量损失率随着木粉含量的提高而增大,但均小于3.5%,方差分析表明,木粉含量对试件质量损失率的影响高度显著,指数函数y=a×exp(x/b)+c对5种木塑材料的平均质量损失率拟合结果较好,决定系数R2为0.923 58;②通过SEM和DSC分析,木塑材料受菌侵染后,主要是木质材料受到了破坏。

关 键 词:木塑  天然耐腐性能  质量损失  SEM  DSC

Research on Decay Resistance of Micro-foamed Wood Plastic Composites
ZHU Yuan , JIANG Zhi-hong.Research on Decay Resistance of Micro-foamed Wood Plastic Composites[J].Journal of Zhejiang Forestry Science and Technology,2012,32(2):29-32.
Authors:ZHU Yuan  JIANG Zhi-hong
Institution:(School of Engineering,Zhejiang A & F University,Lin’an 311300,China)
Abstract:Experiments were conducted on nature decay resistance of wood plastic composites(WPCs) with 5 different wood and plastic ratios.The results showed that nature decay resistance of WPCs was strong,the mass loss rate of specimens decayed increased with wood flour content,but always less than 3.5%.Analysis of variance demonstrated that wood flour content had great effect on mass loss rate of WPCs.Exponential function y = a×exp(x/b)+c could well fit the mean mass loss rate of 5 kinds of WPCs with determination coefficient of 0.92358.Analysis of SEM and DSC showed that wood-rotting fungi mainly decayed the wood component of the specimens.
Keywords:wood plastic composites  nature decay resistance  mass loss rate  SEM  DSC
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号