| IS型离心泵驼峰消除措施试验研究 |
| |
| 引用本文： | 陈燕,王天周,白小榜,罗绍华,张永祥.IS型离心泵驼峰消除措施试验研究[J].排灌机械工程学报,2020,38(1):28-31. |
| |
| 作者姓名： | 陈燕 王天周 白小榜 罗绍华 张永祥 |
| |
| 作者单位： | 重庆水泵厂有限责任公司国家企业技术中心,重庆400033;重庆水泵厂有限责任公司国家企业技术中心,重庆400033;重庆水泵厂有限责任公司国家企业技术中心,重庆400033;重庆水泵厂有限责任公司国家企业技术中心,重庆400033;重庆水泵厂有限责任公司国家企业技术中心,重庆400033 |
| |
| 基金项目： | 重庆市重点产业共性关键技术创新专项 |
| |
| 摘 要： | 为了消除某一单级单吸离心泵扬程曲线存在驼峰的现象,改善性能曲线稳定性,采取3种处理措施,分别为同时减小叶轮进口直径和叶轮出口宽度、在吸入段内增加2块对称布置的隔板、在吸入段内增加1块隔板.通过3次性能试验测试对比分析了3种措施的可行性和有效性.试验结果表明:同时减小叶轮进口直径和叶轮出口宽度,扬程曲线形状几乎无变化,驼峰依然存在,扬程整体有一定的损失和减小,对改善驼峰无明显正面作用;在吸入段内增加2块对称布置的或者1块隔板后,扬程曲线的驼峰几乎完全消失,且扬程值和效率值损失微小,消除驼峰有较明显的效果.为进一步验证吸入段内增加隔板对消除驼峰的作用,在另一扬程曲线有驼峰的单级单吸离心泵上进行试验验证,表明增加隔板后,驼峰完全消除,泵性能仅有轻微的损失,验证了此处理措施的有效性.
|
| 关 键 词： | 离心泵 性能曲线 驼峰 隔板 试验研究 |
| 收稿时间： | 2018-06-11 |
Experiment investigation into measures for eliminating hump in head curve of IS type centrifugal pumps |
| |
| CHEN Yan,WANG Tianzhou,BAI Xiaobang,LUO Shaohua,ZHANG Yongxiang.Experiment investigation into measures for eliminating hump in head curve of IS type centrifugal pumps[J].Journal of Drainage and Irrigation Machinery Engineering,2020,38(1):28-31. |
| |
| Authors: | CHEN Yan WANG Tianzhou BAI Xiaobang LUO Shaohua ZHANG Yongxiang |
| |
| Institution: | National Enterprise Technology Center, Chongqing Pump Industry Co. Ltd., Chongqing 400033, China |
| |
| Abstract: | Experiments showed that there was a hump in the head curve of a single-stage end-suction centrifugal pump. To eliminate the hump and improve the stability of the curve, three measures were taken:(1)reducing impeller inlet diameter and blade outlet width,(2)installing two baffles arranged symmetrically in the suction nozzle, and(3)adding one baffle in the nozzle only. The tested results showed that measure(1)made the shape of the head curve almost unchanged, thus the hump was still present, just as a whole the head suffered from a certain amount of reduction. This suggests measure(1)generates no obviously positive effect on the hump elimination. After measure(2)or(3)was taken, the hump in the head curve almost disappeared, but also the losses in the head and efficiency were minor. The effect of these two measures on eliminating the hump was significant. To validate measure(3)further, the performance curves of another single-stage end-suction centrifugal pump with and without a baffle were tested. The tested data revealed that the added baffle resulted in the hump eliminated basically with a slight loss in the pump performance only, and the effectiveness of the treatment has been confirmed. |
| |
| Keywords: | centrifugal pump performance curve hump baffle experiment investigation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《排灌机械工程学报》浏览原始摘要信息 |
| 点击此处可从《排灌机械工程学报》下载免费的PDF全文 |
|
