|
|||||
|
|
| 向日葵籽壳-杨木刨花板制造工艺研究 | |
| 引用本文： | 花军,吴炳佳,张显全.向日葵籽壳-杨木刨花板制造工艺研究[J].东北林业大学学报,1999,27(3):60-62. |
| 作者姓名： | 花军 吴炳佳 张显全 |
| 作者单位： | 1. 东北林业大学,哈尔滨,150040 2. 黑龙江省带岭林业局 3. 东北林业大学 |
| 摘 要： | 试验采用向日葵籽壳和向日葵籽壳与杨木刨花混合物为原料，分别压制脲醛胶刨花板。结果表明，向日葵籽壳刨花板的物理力学性能，达不到刨花板国家标准（ＧＢ／Ｔ４８９７－９２）的要求，加入杨木刨花可提高向日葵籽壳刨花板的物理力学性能。当向日葵籽壳在向日葵籽壳－杨木混合刨花中所占的比例由７５％下降至５０％时，向日葵籽壳－杨木刨花板的物理力学性能由Ａ类刨花板的二等品上升为特等品。 |
| 关 键 词： | 向日葵籽壳 杨木 刨花板 制造工艺 |
Study on the Manufacturing Technique of Particleboard from Sunflower's Shell-Aspen |
|
| Hua Jun,Wu Bingjia,Zhang Xianquan.Study on the Manufacturing Technique of Particleboard from Sunflower''''s Shell-Aspen[J].Journal of Northeast Forestry University,1999,27(3):60-62. | |
| Authors: | Hua Jun Wu Bingjia Zhang Xianquan |
| Abstract: | The sunflower's shell and the composite of the sunflower's shell and aspen were used to manufacture UF particleboard in this study. The result shows that the mechanical properties of particleboard from pure sunflower's shell difficultly met the particleboard standard of China (GB/T4897-92). The properties were improved while the aspen particle was added into the particleboard.when the composite ratio of sunflower's shell to aspen particle were 75%:25% and 50%: 50%, the mechanical properties of the composite particleboard could respectively meet the second class and the super fine of particleboard standard of China. |
| Keywords: | Sunflower's shell Aspen Particleboard Manufacturing technique |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |