Changes in the anatomy of surface and liquid uptake of wood after laser incising |
| |
Authors: | Yue Wang Keisuke Ando Nobuaki Hattori |
| |
Institution: | 1. Department of Natural Resources and Eco-materials, Graduate School of Agriculture, Tokyo University of Agriculture and Technology, Fuchu, 183-8509, Tokyo, Japan
|
| |
Abstract: | The effects of laser incising on the surface of heat-affected zones (HAZs) and liquid uptake of wood were examined. Deep pin holes were incised on the tangential section of the wood with a laser beam of 1 kW in power with varied pulse widths, and the HAZs of the holes were investigated using scanning electron microscopy. The length of liquid uptake passing through HAZs surfaces was then measured. It was observed that the HAZs were unable to maintain normal porous structure, and smooth surfaces such as that of wood charcoal were also not observed. This is because the composite of the middle lamella completely melted, which led to a decrease in the length of liquid uptake. In addition, the release of high gas-pressure and thermal energy during the laser-incising process did not damage the tylose and the aspirated pit in the longitudinal direction. Because of this, the liquid movement remained blocked. However, the incising holes provided additional liquid-intake points, resulting in greater intake capacity. Moreover, it was observed that improvement of liquid impregnation is related to hole diameter. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|