| 木工螺旋齿圆柱铣刀运动力学特性分析 |
| |
| 引用本文： | 姜新波,张晓飞,杨春梅,姜博文.木工螺旋齿圆柱铣刀运动力学特性分析[J].林产工业,2021(3):1-7. |
| |
| 作者姓名： | 姜新波 张晓飞 杨春梅 姜博文 |
| |
| 作者单位： | 东北林业大学林业机械与木工工程技术中心 |
| |
| 基金项目： | 黑龙江省应用技术研究与开发计划项目“高档智能化木结构梁柱加工数控机床关键技究”(GA19 A402);哈尔滨市应用技术研究与开发项目(2016RAQXJ015);教育部青年基金项目(16XJCZH005)。 |
| |
| 摘 要： | 螺旋齿圆柱铣刀在高速切削木材时会出现崩刃和折断等现象,且小直径长铣刀此类问题尤为明显,为此对螺旋齿圆柱铣刀铣削加工时的运动力学特性进行分析研究。建立螺旋齿圆柱铣刀的矩阵方程,获得铣刀铣削运动轨迹,并明确了铣削加工方式;利用ADAMS分析不同铣削参数对螺旋齿圆柱铣刀切入过程的影响,得到不同铣削参数下螺旋齿圆柱铣刀所受冲击载荷随时间的变化曲线;运用ANSYS Workbench瞬态动力学分析,明确了铣削切入工件时螺旋齿圆柱铣刀的瞬时应力大小和分布情况,为螺旋圆柱铣削加工确定最佳铣削参数提供理论依据。
|
| 关 键 词： | 木工 螺旋齿圆柱铣刀 运动轨迹 运动力学分析 瞬态分析 铣削参数 |
Analysis of Motion Mechanical Characteristics of Cylindrical Milling Cutter with Spiral Teeth for Woodworking |
| |
| JIANG Xin-bo,ZHANG Xiao-fei,YANG Chun-mei,JIANG Bo-wen.Analysis of Motion Mechanical Characteristics of Cylindrical Milling Cutter with Spiral Teeth for Woodworking[J].China Forest Products Industry,2021(3):1-7. |
| |
| Authors: | JIANG Xin-bo ZHANG Xiao-fei YANG Chun-mei JIANG Bo-wen |
| |
| Institution: | (Machinery and Woodworking Engineering Technology Center,Northeast Forestry University,Harbin 150040,Heilongjiang,P.R.China) |
| |
| Abstract: | Due to the phenomenon of chipping and breaking when the spiral tooth cylindrical milling cutter cuts wood at high speed,and such problems of small diameter long milling cutters are particularly obvious,therefore the dynamic characteristics of cylindrical milling cutter with spiral teeth were analyzed and studied.The matrix equation of cylindrical milling cutter with spiral teeth was established,the milling trajectory was obtained and the milling processing method was clarified.Then ADAMS was used to analyze the influence of different milling parameters on the cutting process of spiral tooth cylindrical milling cutter,and the change curve of impact load with time under different milling parameters was obtained.Finally,the transient dynamic analysis was performed using ANSYS Workbench,and the instantaneous stress and distribution of spiral tooth cylindrical milling cutter when cutting into work piece was clarified which provide a theoretical basis for determining the optimal milling parameters during the machining of helical cylindrical milling. |
| |
| Keywords: | Woodworking Spiral tooth cylindrical milling cutter Trajectory Kinematic analysis Transient analysis Milling parameters |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
