首页 | 本学科首页   官方微博 | 高级检索  
     检索      

根生长法测定柳树对重金属的耐性研究(摘要)
引用本文:田胜尼,周疆丽,张玉琼,占明.根生长法测定柳树对重金属的耐性研究(摘要)[J].农业科学与技术,2010,11(4):98-101,171.
作者姓名:田胜尼  周疆丽  张玉琼  占明
作者单位:安徽农业大学生命科学学院,安徽合肥,230036 
基金项目:安徽省高校自然科学基金,安徽农业大学博士启动基金资助项目(WD2006-12).Supported by Natural Science Foundation of Anhui University,Doctor Foundation Projects of Anhui Agricultural University 
摘    要:目的]探讨柳树对单一或复合重金属的耐性大小,为木本植物修复重金属污染土壤提供理论依据。方法]采用根生长法研究重金属Cu^2+、Pb^2+、Zn^2+及3者混合液对柳树枝条不定根生长的影响。调查项目包括柳树枝条不定根的数目及长度,并由此计算生根率、抑制率和耐性指数。结果]不同浓度的重金属溶液对柳树枝条不定根的生长存在显著影响。当Cu^2+浓度高于15mg/L、混合溶液浓度高于20mg/L、Zn^2+浓度高于30mg/L时,柳树枝条均无不定根生成;溶液浓度达到40mg/L时,只有Pb^2+处理组能长出不定根;随着溶液浓度的升高,柳树枝条不定根的数目逐渐下降;浓度为5mg/L的Zn^2+处理组柳树枝条不定根数目最多。其他浓度中,Pb^2+处理组不定根数目最多、根长及平均根长最长、生根率最高。结论]柳树枝条对Pb^2+的耐受性最强,对Cu^2+的耐受性最弱。柳树对3种重金属及3者混合液的耐受性大小依次为Pb^2+〉Zn^2+〉Cu^2++Pb^2++Zn^2+〉Cu^2+。

关 键 词:根生长法  柳树  重金属  耐性

Tolerance of Salix matsudana to Heavy Metals Determined by Root Elongation Method
TIAN Sheng-ni,ZHOU Jiang-li,ZHANG Yu-qiong,ZHAN Ming.Tolerance of Salix matsudana to Heavy Metals Determined by Root Elongation Method[J].Agricultural Science & Technology,2010,11(4):98-101,171.
Authors:TIAN Sheng-ni  ZHOU Jiang-li  ZHANG Yu-qiong  ZHAN Ming
Institution:( School of Life Sciences,Anhui Agricultural University,Hefei 230036 )
Abstract:Objective]The research aimed to discuss the tolerance of Salix matsudana to single or compound heavy metals and provide theoretical basis for renovating polluted soil by heavy metals with woody plants.Method]Using root elongation method,the effects of heavy metal Cu^2+,Pb^2+,Zn^2+ and their mixed solution on the adventitious roots growth of S.matsudana cuttings were studied.Result]The adventitious roots growth of S.matsudana cuttings was obviously affected by different concentrations of heavy metals solution.Adventitious roots of S.matsudana cuttings could not grow while the concentration of Cu^2+ was higher than 15 mg/L,the mixture solution concentration was higher than 20 mg/L and Zn^2+ concentration was higher than 30 mg/L.When the solution concentration reached 40 mg/L,adventitious roots of S.matsudana cuttings could grow only in Pb^2+ treatment group.With the increasing of the solution concentration,the number of adventitious roots of S.matsudana cuttings gradually decreased.In 5 mg/L Zn^2+ treatment group,the number of adventitious roots of S.matsudana cuttings was the most,the longest root length and average root length were the longest and the rooting rate was the highest.Conclusion]The tolerance of S.matsudana to Pb^2+ was strongest and its tolerance to Cu^2+ was the weakest.The tolerance order of S.matsudana to three kinds of heavy metals and their mixed solution was as following:Pb^2+〉Zn^2+〉Cu^2++Pb^2++Zn^2+〉Cu^2+.
Keywords:Root elongation method  Salix matsudana  Heavy metals  Tolerance
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号